Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item A Computer Aided Cooling Curve Analysis method to study phase change materials for thermal energy storage applications(Elsevier Ltd, 2016) Sudheer, R.; Prabhu, K.N.The suitability of a simple Computer Aided Cooling Curve Analysis (CACCA) technique for characterizing thermal energy storage phase change materials (PCM) was proposed in the present work. Two modes of CACCA, namely, Newtonian and Fourier techniques were used to predict the phase transition temperatures, the latent heat of fusion and thermal diffusivities of PCMs. Solidification of potassium nitrate and zinc-8% aluminium alloy (ZA8) was studied using CACCA method. These PCMs were chosen to demonstrate the ability of the proposed technique to characterize PCMs freezing at a single temperature as well as over a range of temperatures. CACCA method showed that potassium nitrate and ZA8 are suitable candidate materials for TES applications operating at 300-350 °C and 350-450 °C respectively. © 2015 Elsevier Ltd.Item Cooling Curve Analysis of Micro- and Nanographite Particle-Embedded Salt-PCMs for Thermal Energy Storage Applications(Springer New York LLC barbara.b.bertram@gsk.com, 2017) Sudheer, R.; Prabhu, K.N.In recent years, the focus of phase change materials (PCM) research was on the development of salt mixtures with particle additives to improve their thermal energy storage (TES) functionalities. The effect of addition of microsized (50 ?m) and nanosized (400 nm) graphite particles on TES parameters of potassium nitrate was analyzed in this work. A novel technique of computer-aided cooling curve analysis was employed here to study the suitability of large inhomogeneous PCM samples. The addition of graphite micro- and nanoparticles reduced the solidification time of the PCM significantly enhancing the heat removal rates, in the first thermal cycle. The benefits of dispersing nanoparticles diminished in successive 10 thermal cycles, and its performance was comparable to the microparticle-embedded PCM thereafter. The decay of TES functionalities on thermal cycling is attributed to the agglomeration of nanoparticles which was observed in SEM images. The thermal diffusivity property of the PCM decreased with addition of graphite particles. With no considerable change in the cooling rates and a simultaneous decrease in thermal diffusivity, it is concluded that the addition of graphite particles increased the specific heat capacity of the PCM. It is also suggested that the additive concentration should not be greater than 0.1% by weight of the PCM sample. © 2017, ASM International.Item Assessment of PCM-container interfacial heat transfer using a hot/cold probe technique(John Wiley and Sons Inc. P.O.Box 18667 Newark NJ 07191-8667, 2019) Sudheer, R.; Prabhu, K.N.A novel technique for assessing heat transfer characteristics of salt-based phase change materials (PCM) was proposed here. The method is based on solution to inverse heat conduction problem. Nanoparticles (Graphite, Graphene, and multi wall carbon nanotube [MWCNT]) were dispersed in the PCM (KNO3) to assess their respective influence on heat transfer in the PCM. Graphite added PCM offered highest heat flow values and heating rates, while the pure salt-PCM offered the least. The probe material had a significant influence on the heat transfer rates at the PCM-probe interface. © 2018 Wiley Periodicals, Inc.