Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
17 results
Search Results
Item Biopolymer Electrolytes(2018) Sudhakar, Y.N.; Bhat, D. Krishna; Selvakumar, M.Item Miscibility studies of chitosan and starch blends in buffer solution(2012) Sudhakar, Y.N.; Holla, S.R.; Muthu, M.; Bhat, D.K.The miscibility of chitosan (CS) and starch in buffer solution (CH 3COOH and CH 3COONa) has been investigated by viscosity, density and refractive index methods at 303K, 313K, and 323K. Various interaction parameters such as polymer-polymer and blend-solvent interaction parameters and heat of mixing have been calculated using viscosity and density data. The results indicated the existence of positive interactions in the blend polymer solutions and that they are miscible below 40% of starch compositions. The study also revealed that variation of temperature does have significant effect on the miscibility of chitosan and starch blends. © 2012 Copyright Taylor and Francis Group, LLC.Item LiClO4-doped plasticized chitosan and poly(ethylene glycol) blend as biodegradable polymer electrolyte for supercapacitors(Institute for Ionics, 2013) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.Biodegradable polymer electrolyte comprising the blend of chitosan (CS) and poly(ethylene glycol) (PEG) plasticized with ethylene carbonate and propylene carbonate, as host polymer, and lithium perchlorate (LiClO4), as a dopant, was prepared by solution casting technique. The ionic conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. The variation of conductivity and dielectric properties has been investigated as a function of polymer blend ratio, plasticizer content and LiClO4 concentration at temperature range of 298-343 K. The DSC thermograms show two broad peaks for CS/PEG blend and increased with increase in the LiClO4 content. The maximum conductivity has been found to be 1. 1 × 10-4 S cm-1 at room temperature for 70:30 (CS/PEG) concentration. The electric modulus of the electrolyte film exhibits a long tail feature indicative of good capacitance. The activation energy of all samples was calculated using the Arrhenius plot, and it has been found to be 0. 12 to 0. 38 eV. A carbon-carbon supercapacitor has been fabricated using this electrolyte, and its electrochemical characteristics and performance have been studied. The supercapacitor showed a fairly good specific capacitance of 47 F g-1. © 2012 Springer-Verlag.Item Tubular array, dielectric, conductivity and electrochemical properties of biodegradable gel polymer electrolyte(Elsevier Ltd, 2014) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.A supercapacitor based on a biodegradable gel polymer electrolyte (GPE) has been fabricated using guar gum (GG) as the polymer matrix, LiClO4 as the doping salt and glycerol as the plasticizer. The scanning electron microscopy (SEM) images of the gel polymer showed an unusual tubular array type surface morphology. FTIR, DSC and TGA results of the GPE indicated good interaction between the components used. Highest ionic conductivity and lowest activation energy values were 2.2 × 10-3 S cm-1 and 0.18 eV, respectively. Dielectric studies revealed ionic behavior and good capacitance with varying frequency of the GPE system. The fabricated supercapacitor showed a maximum specific capacitance value of 186 F g -1 using cyclic voltammetry. Variation of temperature from 273 K to 293 K did not significantly influence the capacitance values obtained from AC impedance studies. Galvanostatic charge-discharge study of supercapacitor indicated that the device has good stability, high energy density and power density. © 2013 Elsevier Ltd. All rights reserved.Item Miscibility studies of starch and poly(4-styrene sulfonic acid) blend system(Sphinx Knowledge House info@sphinxsai.com, 2014) Sudhakar, Y.N.; Bhat, D.; Muthu, M.Polymeric solutions were prepared using blends of starch with poly(4-styrene sulfonic acid) (PSSA) in water and their miscibility was determined by viscosity studies at 30 °C, 40 °C and 50 °C. Using interaction parameters such as Krigbaum’s (?b), Hong’s (?kAB), Chee’s (?), Sun’s (?), polymer-polymer, blend-solvent and heat of mixing there was the existence of positive interactions in the blend polymer solutions only up to 80% PSSA content. A significant variation of miscibility was observed with increase in temperature in the sample containing 70% PSSA content. Polymer blend films obtained by solution casting showed hydrogen bonding in Fourier transform infrared (FTIR) studies. Differential thermal analysis (DTA) and thermogravimetric analysis (TGA) studies also supported the results. A uniform surface of the miscible blend films were observed in scanning electron microscopy images, whereas segregation was observed for the immiscible blends. © 2014, Sphinx Knowledge House. All Rights Reserved.Item Reduced graphene oxide derived from used cell graphite and its green fabrication as an eco-friendly supercapacitor(Royal Society of Chemistry, 2014) Sudhakar, Y.N.; Muthu, M.; Bhat, D.; Senthil Kumar, S.Graphite extracted from a used primary cell was converted into reduced graphene oxide (rGO) using calcium carbonate together with rapid and local Joule heating by microwave irradiation. Electrodes were prepared by ultrasonically dispersing rGO in biodegradable poly(vinylpyrrolidone) (PVP) binder and coating this on recyclable poly(ethyleneterephthalate) (PET) sheet using a low cost screen printing technique. The use of the same polymer (PVP) as a binder, in addition to as the solid polymer electrolyte (SPE), enhances the compatibility and ionic conductivity of the hydrophobic rGO electrode in the supercapacitor system. Further, the phosphoric acid (H3PO4)-doped biodegradable SPE was screen printed for the first time on the rGO electrodes. Ionic conductivity and dielectric studies of the SPE were carried out at different temperatures and different dopant acid concentrations. The morphology, composition and structure of the graphene electrode components were characterized using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) methods. Transmission electron microscopy (TEM) images showed a single layer or a few layers of rGO sheets and selected area electron diffraction showed the presence of slight defects. The fabricated environmentally friendly, industrially favorable and green supercapacitor showed a specific capacitance of 201 F g-1 and cyclic stability with 97% retention of the initial capacitance over 2000 cycles. Furthermore, the performance of this green supercapacitor is comparable to that of those fabricated using rGO synthesized from commercial graphite and in other literature reports. © 2014 The Royal Society of Chemistry.Item Lithium salts doped biodegradable gel polymer electrolytes for supercapacitor application(Universite Mohammed Premier Oujda jmaterenvironsci@gmail.com, 2015) Sudhakar, Y.N.; Muthu, M.; Bhat, D.A biodegradable gel polymer (GPE) consisting of Xanthan gum (XG), glycerol, lithium salts like lithium perchlorate and lithium tetraborate were prepared. Using Fourier transform infrared spectroscopy (FTIR), thermal and scanning electron microscopy characterizations the interactions between the components in the gel matrix were studied. Furthermore, a unique electrochemical property was exhibited by GPEs as measured by AC impedance and dielectric studies. The role of anion in the enhancement of conductivity was important in the present study and highest conductivity of 6.4×10-2 S cm-1 at 333K was achieved among lithium salts. Supercapacitor was fabricated using GPE and tested for its electrochemical properties. Supercapacitor showed specific capacitance of was 82 Fg-1 at a scan rate of 5 mV s-1 for Li2B4O7 and 74 Fg-1 at a scan rate of 5 mV s-1. specific energy and specific power. Galvanostatic charge-discharge studies showed excellent cyclic stability.Item Effect of acid dopants in biodegradable gel polymer electrolyte and the performance in an electrochemical double layer capacitor(Institute of Physics Publishing custserv@iop.org, 2015) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.Proton-conducting biodegradable gellan gum gel polymer electrolytes (GPEs) have been prepared using three different dopants, namely ortho-phosphoric (o-H3PO4), sulfuric (H2SO4) and hydrochloric acids (HCl). The GPEs were cross-linked using borax. The polymeric gels were characterized by spectroscopic, thermal, ionic conductivities and dielectric measurements. Proton conductivity was in the range of 5.1 × 10-3 to 3.7 × 10-4 s cm-1 and activation energies were between 0.14 meV and 0.19 meV, at different temperatures. Among the doped acids, the H3PO4 doped GPE exhibited thermal stability at varying temperature. Electrochemical double layer capacitors (EDLCs) were fabricated using activated carbon as electrode material and GPEs. The EDLCs were tested using cyclic voltammetry, ac impedance spectroscopic and galvanostatic charge-discharge techniques. The maximum specific capacitance value was 146 F g-1 at a scan rate of 2 mV s-1. Quite stable values were obtained at a constant current density up to 1000 cycles. © 2015 The Royal Swedish Academy of Sciences.Item Preparation and characterization of phosphoric acid-doped hydroxyethyl cellulose electrolyte for use in supercapacitor(SpringerOpen, 2015) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.A new borax cross-linked biodegradable solid polymer electrolyte based on hydroxyethyl cellulose and phosphoric acid (H3PO4) was prepared. Characterizations of doped and undoped SPE were done using Fourier transform infrared spectroscopic and electrochemical studies. The ionic conductivity of the films increased with increase in acid concentration and the ionic conductivity obtained at 303 K was 4.1 × 10-3 S cm-1. Furthermore, effects of acid concentration on ionic conductivity and activation energy were discussed. Dielectric studies showed long tail-like feature indicating capacitive nature. A supercapacitor was fabricated and its electrochemical characteristics were studied. The supercapacitor showed a fairly good specific capacitance of 83 F g-1 at 2 mV s-1 and galvanostatic charge-discharge studies showed the mirror-like pattern with 98 % columbic efficiency. Cyclic stability was measured up to 2000 cycles. © 2015 The Author(s).Item Ionic conductivity and dielectric studies of acid doped cellulose acetate propionate solid electrolyte for supercapacitor(John Wiley and Sons Inc, 2016) Sudhakar, Y.N.; Bhat, D.; Muthu, M.Phosphoric acid doped cellulose acetate propionate (CAP) consisting of poly(ethylene glycol) (PEG) as plasticizer was investigated. Ionic conductivities and dielectric studies were carried at different temperature with varying concentration of H3PO4 using AC impedance method. The highest conductivity was 8.1 × 10-4 S cm-1 at 343 K and a long tail was featured in dielectric studies indicating good capacitance nature of the electrolyte. Interactions between added constituents were observed in FTIR and differential scanning calorimetry studies. Thin and compact fabricated supercapacitor demonstrated specific capacitance of 64 F g-1 using cyclic voltammetry. Furthermore, the supercapacitor properties like AC impedance and charge-discharge were studied. Stability was up to 96% at 1000th cycle. POLYM. ENG. SCI., 56:196-203, 2016. © 2015 Society of Plastics Engineers.