Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Production and characterization of biosurfactant produced by a novel Pseudomonas sp. 2B(2012) Aparna, A.; Srinikethan, G.; Smitha, H.Biosurfactant-producing bacteria were isolated from terrestrial samples collected in areas contaminated with petroleum compounds. Isolates were screened for biosurfactant production using Cetyl Tri Ammonium Bromide (CTAB)-Methylene blue agar selection medium and the qualitative drop-collapse test. An efficient bacterial strain was selected based on rapid drop collapse activity and highest biosurfactant production. The biochemical characteristics and partial sequenced 16S rRNA gene of isolate, 2B, identified the bacterium as Pseudomonas sp. Five different low cost carbon substrates were evaluated for their effect on biosurfactant production. The maximum biosurfactant synthesis (4.97g/L) occurred at 96h when the cells were grown on modified PPGAS medium containing 1% (v/v) molasses at 30°C and 150rpm. The cell free broth containing the biosurfactant could reduce the surface tension to 30.14mN/m. The surface active compound showed emulsifying activity against a variety of hydrocarbons and achieved a maximum emulsion index of 84% for sunflower oil. Compositional analysis of the biosurfactant reveals that the extracted biosurfactant was a glycolipid type, which was composed of high percentages of lipid (~65%, w/w) and carbohydrate (~32%, w/w). Fourier transform infrared (FT-IR) spectrum of extracted biosurfactant indicates the presence of carboxyl, hydroxyl and methoxyl functional groups. The mass spectra (MS) shows that dirhamnolipid (l-rhamnopyranosyl-l-rhamnopyranosyl-3-hydroxydecanoyl-3-hydroxydecanoate, Rha-Rha-C 10-C 10) was detected in abundance with the predominant congener monorhamnolipid (l-rhamnopyranosyl-?-hydroxydecanoyl-?-hydroxydecanoate, Rha-C 10-C 10). The crude oil recovery studies using the biosurfactant produced by Pseudomonas sp. 2B suggested its potential application in microbial enhanced oil recovery and bioremediation. © 2012 Elsevier B.V..Item Removal of remazol brilliant blue dye from dye-contaminated water by adsorption using red mud: Equilibrium, kinetic, and thermodynamic studies(2012) Ratnamala, G.M.; Shetty K, K.V.; Srinikethan, G.Utilization of industrial solid wastes for the treatment of wastewater from another industry could help environmental pollution abatement, in solving both solid waste disposal as well as liquid waste problems. Red mud (RM) is a waste product in the production of alumina and it poses serious pollution hazard. The present paper focuses on the possibility of utilization of RM as an adsorbent for removal of Remazol Brilliant Blue dye (RBB), a reactive dye from dye-contaminated water. Adsorption of RBB, from dye-contaminated water was studied by adsorption on powdered sulfuric acid-treated RM. The effect of initial dye concentration, contact time, initial pH, and adsorbent dosage were studied. Langmuir isotherm model has been found to represent the equilibrium data for RBB-RM adsorption system better than Freundlich model. The adsorption capacity of RM was found to be 27.8 mg dye/g of adsorbent at 40 °C. Thermodynamic analysis showed that adsorption of RBB on acid-treated RM is an endothermic reaction with ?H0 of 28.38 kJ/mol. The adsorption kinetics is represented by second-order kinetic model and the kinetic constant was estimated to be 0.0105 ± 0.005 g/mgmin. Validity of intra-particle diffusion kinetic model suggested that among the mass transfer processes during the dye adsorption process, pore diffusion is the controlling step and not the film diffusion. The process can serve dual purposes of utilization of an industrial solid waste and the treatment of liquid waste. © Springer Science+Business Media Dordrecht 2012.Item Simultaneous adsorption of Remazol brilliant blue and Disperse orange dyes on red mud and isotherms for the mixed dye system(Springer Verlag service@springer.de, 2017) Ratnamala, R.; Shetty K, K.V.; Srinikethan, G.The paper presents the adsorption of Remazol brilliant blue (RBB) and Disperse orange 25 (DO25) dyes from aqueous solution of the mixture of dyes onto concentrated sulphuric acid-treated red mud (ATRM). First-order derivative spectrophotometric method was developed for the analysis of RBB and DO25 in mixed dye aqueous solution to overcome the limitations arising due to interference in the zero-order spectral method. The optimum conditions to maximize RBB adsorption favoured the adsorption of RBB, and those for DO25 favoured DO25 adsorption from the mixed dye aqueous solutions. Presence of a second dye always inhibited the adsorption of a target dye. The uptake and percentage adsorption of each of the dyes onto ATRM from the aqueous solution of the mixture of dyes decreased considerably with increasing concentrations of the other dye showing the antagonistic effect. Monocomponent Langmuir isotherm fitted the mixed dye adsorption equilibrium data better than the monocomponent Freundlich isotherm. However, monocomponent models are suitable for the fixed concentration of the other dye. Modified Langmuir isotherm model adequately predicted the multi-component adsorption equilibrium data for RBB-DO25-ATRM adsorption system with a good accuracy and is more generic from the application point of view. © 2017, Springer-Verlag Berlin Heidelberg.Item Surface treated Pteris vittata L. pinnae powder used as an efficient biosorbent of Pb(II), Cd(II), and Cr(VI) from aqueous solution(Taylor and Francis Inc. 325 Chestnut St, Suite 800 Philadelphia PA 19106, 2018) Prabhu, S.G.; Srinikethan, G.; Hegde, S.Biosorption is a surface-dependent phenomenon. Surface modifications by chemical treatment methods could either improve or reduce the biosorption capacity of potential biosorbents. In the present work, pristine Pteris vittata L. pinnae (PPV) powder was treated separately with sodium hydroxide (NaOH), calcium chloride (CaCl2), and nitric acid (HNO3). The pristine and treated biosorbents were used to assess the biosorption of Pb(II), Cd(II), and Cr(VI) as a function of pH. Kinetics and adsorption isotherms were studied. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and scanning electron microscope combined with energy dispersive x-ray (SEM-EDX) spectroscopic techniques were used to characterize the biosorbents before and after chemical treatments. The possible functional groups contributing to the metal sorption were identified. Results revealed favorable biosorption of Pb(II), Cd(II), and Cr(VI) described by pseudo-second order kinetics. NaOH-treated P. vittata (NPV) showed higher biosorption capacity for Pb(II) and Cd(II) compared to that of PPV. ATR-FTIR studies indicated that -OH, -COOH, and -NH2 groups were mainly involved in Cr(VI) and -OH in Pb(II) and Cd(II) biosorption. The enhanced efficiency of NPV and CaCl2 treated P. vittata (CPV) in the uptake of Pb(II) and Cd(II) compared to PPV can be associated with their altered physicochemical characters. © 2018, © 2018 Taylor & Francis Group, LLC.Item Production of bacterial cellulose from Komagataeibacter saccharivorans strain BC1 isolated from rotten green grapes(Taylor and Francis Inc. 325 Chestnut St, Suite 800 Philadelphia PA 19106, 2018) Gopu, G.; Srinikethan, G.Bacterial cellulose (BC) is one of the prominent biopolymers that has been acquiring attention currently due to its distinctive properties and applications in various fields. The current work presents the isolation of Komagataeibacter saccharivorans strain BC1 isolated from rotten green grapes, followed by biochemical and genotypic characterization, which confirmed that the strain is capable of synthesizing cellulose. Further, production media was designed and certain variables such as carbon, nitrogen sources, pH, and temperature were optimized in order to obtain the maximum concentration of cellulose production. We found mannitol to be the ideal carbon source and yeast extract as the ideal nitrogen source with a highest BC dry yield of 1.81 ± 0.25 g/100 mL at pH 5.76 for a week at 30 °C.The charcterization of pellicles by FTIR spectrum depicted similar functional groups present in synthesized BC as that of the commercial cellulose. X-ray diffraction revealed that BC showed 82% crystallinity. Surface morphology of the dried pellicle was studied by SEM image which showed that the BC surface was tightly packed with thin fibers with less porosity. Hence the study demonstrates that the isolates of K.saccharivorans could be used to produce a biopolymer in a short period of time using a modified production medium. © 2018, © 2018 Taylor & Francis.Item Kinetic and equilibrium modeling of biosorption of nickel (II) and cadmium (II) on brewery sludge(IWA Publishing 12 Caxton Street London SW1H 0QS, 2019) Kulkarni, R.M.; Shetty K, K.; Srinikethan, G.In the current study, utilization of industrial waste brewery sludge for the biosorption of nickel (II) and cadmium (II) has been explored. The suitable conditions for the effective removal of Ni (II) and Cd (II) from aqueous solutions were examined. The kinetic evaluation showed that the biosorption process using the sludge followed pseudo-second order kinetics. In the presence of a metal co-ion, competitive and preferential biosorption was observed. The Langmuir model and Freundlich model were able to describe the sorption equilibrium for biosorption of Ni (II) and Cd (II) ions in single and dual metal systems. The effects of co-ion concentrations onto mono-component isotherm parameters (Langmuir and Freundlich) were studied and the inhibitory effect of co-ion concentration was observed. The effective reusability of biomass was assessed by three cycles of sorption-desorption. The sludge, owing to its high biosorption intensity and large availability from the local supply, is a better biosorbent for the treatment of Ni (II) and Cd (II) contaminated water. © IWA Publishing 2019 Water Science & Technology.Item Spontaneous Cr(VI) and Cd(II) biosorption potential of native pinnae tissue of Pteris vittata L., a tropical invasive pteridophyte(Taylor and Francis Inc. 325 Chestnut St, Suite 800 Philadelphia PA 19106, 2019) Prabhu, S.G.; Srinikethan, G.; Hegde, S.Heavy metal pollution is a prevalent and critical environmental concern. Its rampancy is attributed to indiscriminate anthropogenic activities. Several technologies including biosorption have been continuously researched upon to overcome the limitations of the conventional method of treatments in removal of heavy metals. Biosorption technology involves the application of a biomass in its nonliving form. Pteris vittata L., a pteridophyte, considered as an invasive weed was investigated in the present study as a potential decontaminant of toxic metals, Cr(VI) and Cd(II). The adsorption capacity of the biosorbent for Cr(VI) and Cd(II) under equilibrium conditions was investigated. The morphology, elemental composition, functional groups, and thermal stability of the biosorbent before and after metal loading were evaluated. At 303 K and an equilibrium time of 120 min, the maximum loading of Cr(VI) on the biosorbent was estimated to be 166.7 mg/g at pH 2 and Cd(II) to be 31.3 mg/g at pH 6. Isotherm models, kinetic studies, and thermodynamic studies indicated the mechanisms, chemisorption, ion exchange and intraparticle diffusion, controlling the Cr(VI) and Cd(II) uptake, respectively. The interactive effect of multi-metal ions in binary component systems was synergistic for Cd(II) uptake. The results validate the toxic metal removal potency of the biosorbent. © 2019, © 2019 Taylor & Francis Group, LLC.