Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Cadmium (II) and nickel (II) biosorption by Bacillus laterosporus (MTCC 1628)(Taiwan Institute of Chemical Engineers, 2014) Kulkarni, R.; Shetty K, V.; Srinikethan, G.Biosorption of heavy metals is a promising technology that involves removal of toxic metals from industrial waste streams and natural waters. The study describes the sorption of cadmium (II) [Cd (II)] and nickel (II) [Ni (II)] by dead biomass of Bacillus laterosporus, MTCC 1628. The biosorption conditions for the removal of Cd (II) and Ni (II) were examined by studying the effect of pH, contact time, biosorbent dosage and initial metal ion concentration. Shake flask studies yielded adsorption equilibrium in almost 120. min, for both the metals. It was found from Langmuir model that the maximum adsorption capacity for Cd (II) and Ni (II) ions was 85.47. mg/g and 44.44. mg/g respectively. Kinetic evaluation of the experimental data showed that the biosorption process followed pseudo-second order kinetics. Thermodynamic analysis showed that biosorption is an endothermic process with ?. H° of 5.45. kJ/mol for Cd (II) biosorption and 24.33. kJ/mol for Ni (II) biosorption. The surface characteristics of B. laterosporus biomass before and after metal biosorption were analyzed by using scanning electron microscope (SEM) with energy dispersive X-ray spectroscopy (EDAX) to study the changes in surface morphology and elemental constitution of the adsorbent. B. laterosporus exhibited a higher and better potential biosorbent for the removal of Cd (II) as compared to Ni (II) from aqueous solution. © 2013 Taiwan Institute of Chemical Engineers.Item Surface treated Pteris vittata L. pinnae powder used as an efficient biosorbent of Pb(II), Cd(II), and Cr(VI) from aqueous solution(Taylor and Francis Inc. 325 Chestnut St, Suite 800 Philadelphia PA 19106, 2018) Prabhu, S.G.; Srinikethan, G.; Hegde, S.Biosorption is a surface-dependent phenomenon. Surface modifications by chemical treatment methods could either improve or reduce the biosorption capacity of potential biosorbents. In the present work, pristine Pteris vittata L. pinnae (PPV) powder was treated separately with sodium hydroxide (NaOH), calcium chloride (CaCl2), and nitric acid (HNO3). The pristine and treated biosorbents were used to assess the biosorption of Pb(II), Cd(II), and Cr(VI) as a function of pH. Kinetics and adsorption isotherms were studied. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and scanning electron microscope combined with energy dispersive x-ray (SEM-EDX) spectroscopic techniques were used to characterize the biosorbents before and after chemical treatments. The possible functional groups contributing to the metal sorption were identified. Results revealed favorable biosorption of Pb(II), Cd(II), and Cr(VI) described by pseudo-second order kinetics. NaOH-treated P. vittata (NPV) showed higher biosorption capacity for Pb(II) and Cd(II) compared to that of PPV. ATR-FTIR studies indicated that -OH, -COOH, and -NH2 groups were mainly involved in Cr(VI) and -OH in Pb(II) and Cd(II) biosorption. The enhanced efficiency of NPV and CaCl2 treated P. vittata (CPV) in the uptake of Pb(II) and Cd(II) compared to PPV can be associated with their altered physicochemical characters. © 2018, © 2018 Taylor & Francis Group, LLC.Item Kinetic and equilibrium modeling of biosorption of nickel (II) and cadmium (II) on brewery sludge(IWA Publishing 12 Caxton Street London SW1H 0QS, 2019) Kulkarni, R.M.; Shetty K, K.; Srinikethan, G.In the current study, utilization of industrial waste brewery sludge for the biosorption of nickel (II) and cadmium (II) has been explored. The suitable conditions for the effective removal of Ni (II) and Cd (II) from aqueous solutions were examined. The kinetic evaluation showed that the biosorption process using the sludge followed pseudo-second order kinetics. In the presence of a metal co-ion, competitive and preferential biosorption was observed. The Langmuir model and Freundlich model were able to describe the sorption equilibrium for biosorption of Ni (II) and Cd (II) ions in single and dual metal systems. The effects of co-ion concentrations onto mono-component isotherm parameters (Langmuir and Freundlich) were studied and the inhibitory effect of co-ion concentration was observed. The effective reusability of biomass was assessed by three cycles of sorption-desorption. The sludge, owing to its high biosorption intensity and large availability from the local supply, is a better biosorbent for the treatment of Ni (II) and Cd (II) contaminated water. © IWA Publishing 2019 Water Science & Technology.Item Spontaneous Cr(VI) and Cd(II) biosorption potential of native pinnae tissue of Pteris vittata L., a tropical invasive pteridophyte(Taylor and Francis Inc. 325 Chestnut St, Suite 800 Philadelphia PA 19106, 2019) Prabhu, S.G.; Srinikethan, G.; Hegde, S.Heavy metal pollution is a prevalent and critical environmental concern. Its rampancy is attributed to indiscriminate anthropogenic activities. Several technologies including biosorption have been continuously researched upon to overcome the limitations of the conventional method of treatments in removal of heavy metals. Biosorption technology involves the application of a biomass in its nonliving form. Pteris vittata L., a pteridophyte, considered as an invasive weed was investigated in the present study as a potential decontaminant of toxic metals, Cr(VI) and Cd(II). The adsorption capacity of the biosorbent for Cr(VI) and Cd(II) under equilibrium conditions was investigated. The morphology, elemental composition, functional groups, and thermal stability of the biosorbent before and after metal loading were evaluated. At 303 K and an equilibrium time of 120 min, the maximum loading of Cr(VI) on the biosorbent was estimated to be 166.7 mg/g at pH 2 and Cd(II) to be 31.3 mg/g at pH 6. Isotherm models, kinetic studies, and thermodynamic studies indicated the mechanisms, chemisorption, ion exchange and intraparticle diffusion, controlling the Cr(VI) and Cd(II) uptake, respectively. The interactive effect of multi-metal ions in binary component systems was synergistic for Cd(II) uptake. The results validate the toxic metal removal potency of the biosorbent. © 2019, © 2019 Taylor & Francis Group, LLC.