Faculty Publications

Now showing 1 - 2 of 2

Implementation of tubercles on Vertical Axis Wind Turbines (VAWTs): An Aerodynamic Perspective
(Elsevier Ltd, 2022) Sridhar, S.; Joseph, J.; Radhakrishnan, J.
In recent days, enhancement of Vertical Axis Wind Turbines (VAWTs) by mitigating flow deteriorating effects like dynamic stalling, unsteady wake is given great importance. The following article focuses on implementing four different tubercles on the blades’ leading edge and studying its performance and flow characteristics using CFD techniques. Results indicate that the addition of tubercles generated counter-rotating vortices and delayed flow separation and helped control dynamic stalling. Between azimuth angles 70°–160°, the flow was seen to separate only along the trough regions of the blade and remained attached along the peak regions, thus providing more torque and power. In addition to the enhancements in the flow characteristics, a 28% increase in power coefficient was observed for the optimal configuration at the optimal tip speed ratio. Additionally, a 14% increase in maximum lift generated by the blade was observed. Preliminary aeroacoustics analysis revealed a 12% and 20% decrease in the noise emissions along the blade tip and mid-plane of the turbine, respectively. Hence, it can be shown that tubercles effectively control dynamic stall, reduce noise emissions, and increase the power output of VAWTs. © 2022 Elsevier Ltd
Experimental and numerical analysis of humpback whale inspired tubercles on swept wings
(Emerald Publishing, 2022) Joseph, J.; A, S.; Sridhar, S.
Purpose: With aims to increase the aerodynamic efficiency of aerodynamic surfaces, study on flow control over these surfaces has gained importance. With the addition of flow control devices such as synthetic jets and vortex generators, the flow characteristics can be modified over the surface and, at the same time, enhance the performance of the body. One such flow control device is the tubercle. Inspired by the humpback whale’s flippers, these leading-edge serrations have improved the aerodynamic efficiency and the lift characteristics of airfoils and wings. This paper aims to discusses in detail the flow physics associated with tubercles and their effect on swept wings. Design/methodology/approach: This study involves a series of experimental and numerical analyses that have been performed on four different wing configurations, with four different sweep angles corresponding to 0°, 10°, 20° and 30° at a low Reynolds number corresponding to Rec=100,000. Findings: Results indicate that the effect of tubercles diminishes with an increase in wing sweep. A significant performance enhancement was observed in the stall and post-stall regions. The addition of tubercles led to a smooth post-stall lift characteristic compared to the sudden loss in the lift with regular wings. Among the four different wings under observation, it was found that tubercles were most effective on the 0° configuration (no sweep), showing a 10.8% increment in maximum lift and a 38.5% increase in the average lift generated in the post-stall region. Tubercles were least effective on 30° configuration. Furthermore, with an increase in wing sweep, co-rotating vortices were distinctly observed rather than counter-rotating vortices. Originality/value: While extensive numerical and experimental studies have been performed on straight wings with tubercles, studies on the tubercle effect on swept wings at low Reynolds number are minimal and mainly experimental in nature. This study uses numerical methods to explore the complex flow physics associated with tubercles and their implementation on swept wings. This study can be used as an introductory study to implement passive flow control devices in the low Reynolds number regime. © 2022, Emerald Publishing Limited.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results