Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Early age, hydration, mechanical and microstructure properties of nano-silica blended cementitious composites(Elsevier Ltd, 2020) Snehal, K.; Das, B.B.; Akanksha, M.This study was carried out to understand the influence of nano-silica on hydration properties of binary, ternary and quaternary blended cement paste and mortar containing micro to nano sized admixtures including fly ash (FA), ultrafine fly ash (UFFA) and nano-silica in colloidal form (CNS). Characterization methods such as thermogravimetric analysis (TGA), X-ray diffraction studies (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) was employed to quantify the hydration products. Further, early age and mechanical properties were also investigated for binary, ternary and quaternary cementitious system blended with nano-silica. The optimized proportions of blended paste and mortar are designed through modified Andreasen and Andersen particle packing model. The experimental test results revealed that the optimum dosage of CNS in binary blended cement composites is 3%. The presence of nano-silica in cementitious system amplified the hydration and pozzolanic activity, thereby promoting densified microstructure at nano scale. The flow test indicated the intensified demand for water absorption and reduced workability with the rise in level of incorporation of CNS particles in cement paste. Quaternary blended mix performed superior hydration along with strength properties amongst all the blended samples. © 2019 Elsevier LtdItem Influence of Integration of Phase Change Materials on Hydration and Microstructure Properties of Nanosilica Admixed Cementitious Mortar(American Society of Civil Engineers (ASCE) onlinejls@asce.org 1801 Alexander Bell DriveGEO Reston VA 20191 Alabama, 2020) Snehal, K.; Das, B.B.; Kumar, S.The present study demonstrates the influence of integrating phase change materials (PCMs) on hydration and microstructure properties of nanosilica admixed cementitious mortar. First, the optimized dosage of nanosilica in correspondence to compressive strength was determined. Subsequently, the desired proportion of PCMs was identified pertaining to a designated compressive strength of 35 MPa at the curing age of 28 days. The hydration and microstructure studies were carried out through thermo gravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM), respectively. Further, thermal properties were determined by means of differential scanning calorimetry (DSC). Incorporation of nanosilica into the cementitious mortar was found to have a positive influence on early strength development and durability, however, there was found to be an increase in chemical shrinkage as compared to the control mixture. PCMs integrated cementitious mortar improved the thermal efficiency as well as reduced the chemical shrinkage, but adversely affected the mechanical, hydration, and durability properties. With respect to development of compressive strength of the cementitious mortar, it is found that n-octadecane PCMs performed better amidst other PCMs, such as paraffin and sodium carbonate hydrates. Further, studies were carried out on cementitious mortar having both nanosilica (optimized proportion) and PCMs (the best performing). From the results, it is found that cementitious mortar comprising of both nanosilica and PCMs have compensated the drawbacks of one another. Blended mortar (having both nanosilica and PCMs) showed superior strength gain at early age, better durability resistance, low chemical shrinkage, and superior thermal performance. © 2020 American Society of Civil Engineers.Item Effect of phase-change materials on the hydration and mineralogy of cement mortar(ICE Publishing, 2020) Snehal, K.; Das, B.B.The influence of direct incorporation of thermally efficient phase-change materials (PCMs) on the hydration and mineralogical properties of cement mortar was investigated. To assess the viability of bulk addition of PCMs to a cementitious system, tests of the early age, hydration, mechanical, durability and mineralogical properties were carried out. Organic PCMs showed an increase in setting time, while inorganic materials exhibited fast setting characteristics. Surface temperature was also found to be lower for cement paste with incremental dosages of PCM. However, chemical shrinkage was found to be reduced in the presence of PCM except for the inorganic type. It was observed from the results that PCMs negatively influenced the rate of strength development of a cementitious mortar. The slow rate of strength development was found to be attributed to interrupted hydration, which was confirmed through mineralogical studies. Further, from the thermo-gravimetric analysis, it was observed that the presence of PCMs in a cementitious system increased calcium hydroxide content and reduced the content of water related to hydration products. © 2020 ICE Publishing: All rights reserved.Item Acid, alkali and chloride resistance of binary, ternary and quaternary blended cementitious mortar integrated with nano-silica particles(Elsevier Ltd, 2021) Snehal, K.; Das, B.B.This paper investigates the quantification of ettringite (Ca6Al2(SO4)3(OH)12.26H2O, AFt), gypsum (CaSO4.2H2O, Gy) and Friedel's salt (Ca4Al2(OH)12Cl2.4H2O, Fs) formed for binary, ternary and quaternary blended cementitious mortar mixes that were exposed to acid (H2SO4), alkali (Na2SO4) and chloride (NaCl) solutions. Quantification was carried out through a thermogravimetric analyzer by characterizing the mass loss associated to the decomposition of these compounds at specific boundaries of temperature (50–120 °C for AFt, 120–150 °C for Gy and 230–380 °C for Fs). Binary, ternary and quaternary blended cementitious mortar mixes were designed by adopting modified Andreasen and Andersen particle packing model. A long-term exposure period was spanned to the duration of 180 days for all kind of aggressive media and its effect on engineering properties of blended cementitious mortar were measured. Deterioration due to acid (H2SO4) exposure is found to be more intense due to the synergistic action of acid and sulfates. It is to be noted that for acid exposure period of 180 days, control mortar underwent an acute density and strength losses of 18% and 59%, respectively. However, cementitious mortar mix consisting of 3% nano-silica performs the best against aggressive media. The optimistic resistance to the formation of AFt and Gy was also found to be offered by quaternary blended mix. A similar trend was also observed in the formation of Fs for the mortar mixes exposed to NaCl solution. Significant improvement in particle packing density by the inclusion of micron to nano sized finer particles for quaternary blended mortar mix has minimized the permeable porosity, thus reduced the susceptibility to the formation of voluminous compounds. Enhanced pozzolanic activity due to the presence of nano-silica could be one of the primary reasons for quaternary blended mortar to perform better against the aggressive media that can be adopted in the practice considering sustainability and economical point of view. © 2021 Elsevier LtdItem Synergistic effect of nano silica on carbonation resistance of multi-blended cementitious mortar(Elsevier Ltd, 2023) Snehal, K.; Das, B.B.; Barbhuiya, S.Confiscation of alkaline buffer in a blended cementitious system surges the risk of carbonation. Understanding the carbonation mechanism and kinetics of multi-blended cementitious systems in correspondence to microstructural properties is the need of the hour. In this context, the change in the microstructure of binary, ternary, and quaternary blended cementitious mortar mix comprising of fly ash or/and ultra-fine fly ash or/and nano-silica upon accelerated carbonation (3.5% CO2; 70% RH) was studied. All multi-blended mixes were proportioned using modified Andreasen and Andersen particle packing theory. Permeable porosity and carbonation parameters such as carbonation depth, rate of change in compressive strength, and carbonation shrinkage were measured. Further, qualitative/quantitative estimation of carbonation phases was done using characterization techniques such as TGA and FTIR. In control mix with solely OPC, the reaction of CO2 with calcium-bearing phases showed chemo-mechanical changes leading to 18% improvement in strength at 30 days of exposure. The optimized multi-blended cementitious systems with nano-silica exhibited higher resistance to carbonation kinetics. Phase assemblages quantified through TGA within depth of carbonation imply a negligible concentration of portlandite (CH). However, mixes without nano-silica exhibited a significant reduction in bound water content associated with C–S–H/AFt/AFm phases and intensified the precipitation of calcium carbonate (CaCO3) phase. Asymmetric stretching band of C–O–C at 1424 cm−1 corresponding to calcite phase measured using FTIR validates the outcomes of TGA. © 2023 Elsevier Ltd