Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Early age, hydration, mechanical and microstructure properties of nano-silica blended cementitious composites(Elsevier Ltd, 2020) Snehal, K.; Das, B.B.; Akanksha, M.This study was carried out to understand the influence of nano-silica on hydration properties of binary, ternary and quaternary blended cement paste and mortar containing micro to nano sized admixtures including fly ash (FA), ultrafine fly ash (UFFA) and nano-silica in colloidal form (CNS). Characterization methods such as thermogravimetric analysis (TGA), X-ray diffraction studies (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) was employed to quantify the hydration products. Further, early age and mechanical properties were also investigated for binary, ternary and quaternary cementitious system blended with nano-silica. The optimized proportions of blended paste and mortar are designed through modified Andreasen and Andersen particle packing model. The experimental test results revealed that the optimum dosage of CNS in binary blended cement composites is 3%. The presence of nano-silica in cementitious system amplified the hydration and pozzolanic activity, thereby promoting densified microstructure at nano scale. The flow test indicated the intensified demand for water absorption and reduced workability with the rise in level of incorporation of CNS particles in cement paste. Quaternary blended mix performed superior hydration along with strength properties amongst all the blended samples. © 2019 Elsevier LtdItem Influence of Integration of Phase Change Materials on Hydration and Microstructure Properties of Nanosilica Admixed Cementitious Mortar(American Society of Civil Engineers (ASCE) onlinejls@asce.org 1801 Alexander Bell DriveGEO Reston VA 20191 Alabama, 2020) Snehal, K.; Das, B.B.; Kumar, S.The present study demonstrates the influence of integrating phase change materials (PCMs) on hydration and microstructure properties of nanosilica admixed cementitious mortar. First, the optimized dosage of nanosilica in correspondence to compressive strength was determined. Subsequently, the desired proportion of PCMs was identified pertaining to a designated compressive strength of 35 MPa at the curing age of 28 days. The hydration and microstructure studies were carried out through thermo gravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM), respectively. Further, thermal properties were determined by means of differential scanning calorimetry (DSC). Incorporation of nanosilica into the cementitious mortar was found to have a positive influence on early strength development and durability, however, there was found to be an increase in chemical shrinkage as compared to the control mixture. PCMs integrated cementitious mortar improved the thermal efficiency as well as reduced the chemical shrinkage, but adversely affected the mechanical, hydration, and durability properties. With respect to development of compressive strength of the cementitious mortar, it is found that n-octadecane PCMs performed better amidst other PCMs, such as paraffin and sodium carbonate hydrates. Further, studies were carried out on cementitious mortar having both nanosilica (optimized proportion) and PCMs (the best performing). From the results, it is found that cementitious mortar comprising of both nanosilica and PCMs have compensated the drawbacks of one another. Blended mortar (having both nanosilica and PCMs) showed superior strength gain at early age, better durability resistance, low chemical shrinkage, and superior thermal performance. © 2020 American Society of Civil Engineers.Item Effect of phase-change materials on the hydration and mineralogy of cement mortar(ICE Publishing, 2020) Snehal, K.; Das, B.B.The influence of direct incorporation of thermally efficient phase-change materials (PCMs) on the hydration and mineralogical properties of cement mortar was investigated. To assess the viability of bulk addition of PCMs to a cementitious system, tests of the early age, hydration, mechanical, durability and mineralogical properties were carried out. Organic PCMs showed an increase in setting time, while inorganic materials exhibited fast setting characteristics. Surface temperature was also found to be lower for cement paste with incremental dosages of PCM. However, chemical shrinkage was found to be reduced in the presence of PCM except for the inorganic type. It was observed from the results that PCMs negatively influenced the rate of strength development of a cementitious mortar. The slow rate of strength development was found to be attributed to interrupted hydration, which was confirmed through mineralogical studies. Further, from the thermo-gravimetric analysis, it was observed that the presence of PCMs in a cementitious system increased calcium hydroxide content and reduced the content of water related to hydration products. © 2020 ICE Publishing: All rights reserved.Item Influence of Geopolymerization Factors on Sustainable Production of Pelletized Fly Ash-Based Aggregates Admixed with Bentonite, Lime, and GGBS(American Society of Civil Engineers (ASCE), 2023) Sharath, B.P.; Snehal, K.; Das, B.B.; Barbhuiya, S.This experimental research investigates the influence of geopolymerization factors such as Na2O dosages, water and mineral admixture [bentonite (BT), burnt lime (BL), and ground granulated blast furnace slag (GGBS)] on physiomechanical properties of the pelletized fly ash (FA)-based aggregates. Taguchi's L9 orthogonal array was adopted to design the mixing ratios for three kinds of fly ash-based aggregates (in the combinations of FA-BT, FA-BL, and FA-GGBS). The degree of geopolymerization of the produced aggregates was characterized using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and a scanning electron microscope (SEM). Most influential response indices in the production of pelletized aggregates were identified using gray relational analysis. The physiomechanical characteristics of the fly-ash aggregates were significantly improved by admixing BL than that of GGBS and BT. However, pelletization efficiency was seen to be superior for GGBS-substituted fly-ash aggregates. The quantified amount of hydration products, i.e., sodium alumino-silicate hydrate (N-A-S-H)/calcium alumino-silicate hydrate (C-A-S-H) for fly ash-based aggregates intensified on increasing Na2O and mineral admixture dosages. The results strongly suggest the existence of a linear relationship between the quantified amount of N-A-S-H/C-A-S-H and individual pellet strength of produced aggregate. The FTIR spectrum showed strong and broadened bands of Si-O terminal for all types of aggregates, representing the conversion of unreacted minerals to chains of aluminosilicate gel (geopolymerized hydration product). Further, it can also be inferred from gray relational analysis that among all other factors, Na2O content significantly impacted the engineering properties of produced fly ash-based aggregates. © 2023 American Society of Civil Engineers.