Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Early age, hydration, mechanical and microstructure properties of nano-silica blended cementitious composites(Elsevier Ltd, 2020) Snehal, K.; Das, B.B.; Akanksha, M.This study was carried out to understand the influence of nano-silica on hydration properties of binary, ternary and quaternary blended cement paste and mortar containing micro to nano sized admixtures including fly ash (FA), ultrafine fly ash (UFFA) and nano-silica in colloidal form (CNS). Characterization methods such as thermogravimetric analysis (TGA), X-ray diffraction studies (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) was employed to quantify the hydration products. Further, early age and mechanical properties were also investigated for binary, ternary and quaternary cementitious system blended with nano-silica. The optimized proportions of blended paste and mortar are designed through modified Andreasen and Andersen particle packing model. The experimental test results revealed that the optimum dosage of CNS in binary blended cement composites is 3%. The presence of nano-silica in cementitious system amplified the hydration and pozzolanic activity, thereby promoting densified microstructure at nano scale. The flow test indicated the intensified demand for water absorption and reduced workability with the rise in level of incorporation of CNS particles in cement paste. Quaternary blended mix performed superior hydration along with strength properties amongst all the blended samples. © 2019 Elsevier LtdItem Pozzolanic Reactivity, Hydration and Microstructure Characteristics of Blended Cementitious Composites Comprising of Ultrafine Particles(Springer Science and Business Media Deutschland GmbH, 2022) Snehal, K.; Das, B.B.; Sudhi, A.; Pandey, D.Performance of ultrafine fly ash (UFFA, 5–10 µm) and fly ash (FA, 45–50 µm) particles in cementitious composites was investigated individually as well as in combination. To study the physicochemical behaviour of blended cementitious composites, engineering properties and pozzolanic reactivity test were conducted. Further, characterization techniques such as thermogravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDX) were employed. The results showed good amplification in the development of early compressive strength and durability on admixing ultrafine particles of fly ash (UFFA) in cementitious system. Particle size and specific surface area of UFFA greatly influenced on the phase assemblages of cementitious composites, i.e. due to enriched pozzolanic reactivity which reduced Ca/Si atomic ratio (≤ 1.82) in the pore solution of cementitious matrix. On contrary, the presence of UFFA particles in cementitious composite mix developed disjoining pressure in addition to self-desiccation thereby induced early age cracks and also reduced the workability in correspondence to that of FA particles. Further, use of UFFA in conjunction with FA particles, cementitious composites showed much superior performance in terms of both physical and chemical characteristics, which necessitates the crucial need of admixing micron and submicron size particles in the design of sustainable and high-performance cementitious composites at this point of time. © 2022, The Author(s), under exclusive licence to Shiraz University.Item Synergistic effect of nano silica on carbonation resistance of multi-blended cementitious mortar(Elsevier Ltd, 2023) Snehal, K.; Das, B.B.; Barbhuiya, S.Confiscation of alkaline buffer in a blended cementitious system surges the risk of carbonation. Understanding the carbonation mechanism and kinetics of multi-blended cementitious systems in correspondence to microstructural properties is the need of the hour. In this context, the change in the microstructure of binary, ternary, and quaternary blended cementitious mortar mix comprising of fly ash or/and ultra-fine fly ash or/and nano-silica upon accelerated carbonation (3.5% CO2; 70% RH) was studied. All multi-blended mixes were proportioned using modified Andreasen and Andersen particle packing theory. Permeable porosity and carbonation parameters such as carbonation depth, rate of change in compressive strength, and carbonation shrinkage were measured. Further, qualitative/quantitative estimation of carbonation phases was done using characterization techniques such as TGA and FTIR. In control mix with solely OPC, the reaction of CO2 with calcium-bearing phases showed chemo-mechanical changes leading to 18% improvement in strength at 30 days of exposure. The optimized multi-blended cementitious systems with nano-silica exhibited higher resistance to carbonation kinetics. Phase assemblages quantified through TGA within depth of carbonation imply a negligible concentration of portlandite (CH). However, mixes without nano-silica exhibited a significant reduction in bound water content associated with C–S–H/AFt/AFm phases and intensified the precipitation of calcium carbonate (CaCO3) phase. Asymmetric stretching band of C–O–C at 1424 cm−1 corresponding to calcite phase measured using FTIR validates the outcomes of TGA. © 2023 Elsevier LtdItem Influence of Geopolymerization Factors on Sustainable Production of Pelletized Fly Ash-Based Aggregates Admixed with Bentonite, Lime, and GGBS(American Society of Civil Engineers (ASCE), 2023) Sharath, B.P.; Snehal, K.; Das, B.B.; Barbhuiya, S.This experimental research investigates the influence of geopolymerization factors such as Na2O dosages, water and mineral admixture [bentonite (BT), burnt lime (BL), and ground granulated blast furnace slag (GGBS)] on physiomechanical properties of the pelletized fly ash (FA)-based aggregates. Taguchi's L9 orthogonal array was adopted to design the mixing ratios for three kinds of fly ash-based aggregates (in the combinations of FA-BT, FA-BL, and FA-GGBS). The degree of geopolymerization of the produced aggregates was characterized using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and a scanning electron microscope (SEM). Most influential response indices in the production of pelletized aggregates were identified using gray relational analysis. The physiomechanical characteristics of the fly-ash aggregates were significantly improved by admixing BL than that of GGBS and BT. However, pelletization efficiency was seen to be superior for GGBS-substituted fly-ash aggregates. The quantified amount of hydration products, i.e., sodium alumino-silicate hydrate (N-A-S-H)/calcium alumino-silicate hydrate (C-A-S-H) for fly ash-based aggregates intensified on increasing Na2O and mineral admixture dosages. The results strongly suggest the existence of a linear relationship between the quantified amount of N-A-S-H/C-A-S-H and individual pellet strength of produced aggregate. The FTIR spectrum showed strong and broadened bands of Si-O terminal for all types of aggregates, representing the conversion of unreacted minerals to chains of aluminosilicate gel (geopolymerized hydration product). Further, it can also be inferred from gray relational analysis that among all other factors, Na2O content significantly impacted the engineering properties of produced fly ash-based aggregates. © 2023 American Society of Civil Engineers.