Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Performance intensification of the polysulfone ultrafiltration membrane by blending with copolymer encompassing novel derivative of poly(styrene-co-maleic anhydride) for heavy metal removal from wastewater(Elsevier B.V., 2018) Gnani Peer Mohamed, G.P.S.; Isloor, A.M.; Siddique, I.; Asiri, A.M.; A.F., A.F.; Kumar, R.; Ahamed, M.I.A simple, scalable, novel polymer was synthesized by the aminolysis of poly(styrene-co-maleic anhydride) cumene terminated (PSMAC) using p-aminohippuric acid. The main objective was to perceive the effect of blend ratio of polysulfone (PSF) and poly[styrene-alt-(N-4-benzoylglycine-maleamic acid)] cumene terminated (PAH) on morphology and permeation properties of the membranes. The PSF/PAH blend membranes unveiled enriched hydrophilicity, porosity, zeta potential, water uptake and permeability owing to the existence of the hydrophilic PAH. However, the contact angle was not diminished over 20% of PAH ratio as there was an increase of hydrophobic alkyl group density. Differential scanning calorimetry (DSC) was employed for the determination of the glass transition temperature of the blends and the results revealed that the polymer blend is miscible in nature. Moreover, the M-3 membrane was screened for the heavy metal ion removal and achieved removal of 91.5% of Pb2+ and 72.3% of Cd2+ ions, respectively. The adsorption parameters indicated that the Langmuir isotherm model fits well for both Pb2+ and Cd2+ ions adsorption on M-3 membrane. The adsorption capacity attained from Langmuir isotherm model was 19.35 and 9.88 mg/g for Pb2+ and Cd2+ ions correspondingly. © 2018 Elsevier B.V.Item Novel polyphenylsulfone (PPSU)/nano tin oxide (SnO2) mixed matrix ultrafiltration hollow fiber membranes: Fabrication, characterization and toxic dyes removal from aqueous solutions(Elsevier B.V., 2019) Nayak, M.C.; Isloor, A.M.; Siddique, I.; Balakrishna Prabhu, B.; Ismail, N.I.; Asiri, A.M.Novel polyphenylsulfone (PPSU)/nano tin oxide (SnO2) mixed matrix hollow fiber membranes (HFMs) were fabricated by dry-wet spinning via phase separation method. In the current research, reported the contrast between neat PPSU membrane and nanocomposite membranes (PPSU/SnO2), to determine the toxic reactive dyes namely, reactive black-5 (RB-5) and reactive orange-16 (RO-16) removal ability from the aqueous media. Scanning electron microscopy (SEM) was used to observe the HFMs cross-sectional morphological changes and surface roughness parameters of membranes were analyzed using atomic force microscopy (AFM). The surface wettability ability of HFMs was examined with a contact angle, water uptake, and porosity measurements. The cross-flow filter unit was engaged to quantify the water permeability, anti-fouling ability as well as the dye rejection ability of fabricated membranes. With increasing the SnO2 NPs wt% in PPSU polymer matrix the membrane performance was enhanced continuously, it became evident that the incorporated SnO2 NPs plays main role in membrane performance. Added, water-soluble poly (vinylpyrrolidone) (PVP) can also impact the pore morphology in membranes. At the end, PS-3 membrane exhibited lower contact angle (63.7 0), higher water uptake (74.8%), porosity (84.1%), pure water flux 362.9 L/m2 h, and high potential for dyes rejection application, of about >94% for RB-5, and >73% for RO-16 dye, respectively. From the preliminary results, it can be stated that the usage of SnO2 NPs in membrane technology become effective towards wastewater treatment. © 2019 Elsevier B.V.Item Improved separation of dyes and proteins using membranes made of polyphenylsulfone/cellulose acetate or acetate phthalate(Springer Science and Business Media Deutschland GmbH, 2020) Kumar, M.; Isloor, A.M.; Todeti, S.R.; Gnani Peer Mohamed, G.P.S.; Siddique, I.; A.F., A.F.; Asiri, A.M.Industrial wastewater often contains xenobiotics such as heavy metals, dyes and proteins, yet there is a lack of efficient cleaning methods. Therefore, here we fabricated hollow fiber membranes using polyphenylsulfone containing 1, 3 and 5 wt% of cellulose acetate and cellulose acetate phthalate by non-solvent induced phase separation. Membrane morphology was characterized by field emission scanning electron microscopy. The hydrophilicity of the membranes was measured by contact angle, water uptake and porosity measurement. The thermal miscibility of the membrane with additives was assessed by thermogravimetric analysis. Hollow fiber membranes were tested for separation of azo dyes, e.g., reactive orange 16 and reactive black 5, and of proteins: bovine serum albumin, egg albumin and pepsin. Results show increasing rejection of dyes and proteins with the content of cellulose acetate and cellulose acetate phthalate. Water permeability was 41.26 L/m2 h bar for the polyphenylsulfone membrane, 64.47 L/m2 h bar for the polyphenylsulfone/5 wt% cellulose acetate membrane and 72.60 L/m2 h bar for the polyphenylsulfone/5 wt% cellulose acetate phthalate membrane. © 2020, Springer Nature Switzerland AG.Item Pervaporation dehydration of bio-fuel (n-butanol) by dry thermal treatment membrane(Institute of Physics Publishing helen.craven@iop.org, 2020) Manshad, S.; Isloor, A.M.; Mohd Nawawi, M.G.; Siddique, I.; Khan, I.; Marwani, H.M.In the present investigation, laboratory synthesized graphene oxide (GO) as a nano-filler was used in polyetherimide (PEI) flat-sheet membranes (PM). The PEI flat-sheet membrane was fabricated through a dry-thermal treatment (DTT) method. The effects of fabrication method were investigated on polyetherimide-GO membrane prepared by dry-thermal treatment (PMDTT). The morphological structure was investigated via different characterization; Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), contact angle measurement and Raman spectra. The results indicated that, the hybrid PMDTT membrane displayed reasonably better pervaporation separation performance in comparison to neat PMDTT membranes. The concentrations of water at the permeate side of hybrid and neat PMDTT membrane were 99.3 and 90.9 wt.%, respectively. Hybrid membranes showed a 78.3% enhanced permeation rate. Enhancement of pervaporation property of hybrid PMDTT membrane could be ascribed mainly due to the presence of graphene oxide in the dense top layer. Overall, the blending of graphene oxide in hybrid PMDTT membranes could be a promising approach for enhancing the pervaporation properties of the membranes. © 2020 The Author(s). Published by IOP Publishing Ltd.