Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Shiva Naik, B.Subject: search.filters.subject.Single source

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    A novel single source multilevel inverter with hybrid switching technique
    (John Wiley and Sons Ltd, 2022) Nageswar Rao, B.; Yellasiri, Y.; Shiva Naik, B.; Venkataramanaiah, J.; Aditya, K.; Panda, A.
    A novel multilevel inverter (MLI) configuration with the hybrid switching technique is presented in this paper. The proposed MLI consists of the H-bridge combination with unidirectional switches, half-bridges, and transformers. The suggested MLI with the additional cascaded connection increases to higher voltage levels. The number of employed components in this topology is drastically minimized. Therefore, the complexity, cost, and volume of the proposed topology are also reduced. The operation of the suggested topology is tested through the improved novel switching technique. This modulation method reduces the total harmonic distortion (THD) and produces high root mean square (RMS) voltage. Further, a comprehensive comparison with the recent MLI topologies is performed to validate the merits of the suggested inverter. Simulation and experimental results verify the suggested topology performance using the new modulation technique at different loading conditions and modulation indices. © 2021 John Wiley & Sons, Ltd.
  • No Thumbnail Available
    Item
    A capacitor based single source MLI with natural balancing and less component for EV/HEV application
    (John Wiley and Sons Ltd, 2022) Aditya, K.; Yellasiri, Y.; Shiva Naik, B.; Nageswar Rao, B.; Panda, A.K.
    Due to their remarkable performance, capacitor-based inverters have recently gained attention. Hence, a new capacitor-based multilevel inverter is presented in this paper for electric and hybrid electric vehicle (EV and HEV) applications. EV systems are quite well for their use of two-level inverters; however, the generated load voltage comprises substantial undesirable harmonic content. It is regarded as one of the most efficient methods since replacing a two-level inverter with a multilevel inverter improves the power quality despite significantly reducing total harmonic distortion. Therefore, the recommended filter dimension will also be minimized. A flurry of reliability concerns has arisen due to the increased number of devices, circuit complexity, and stress on the circuit devices. A nine-level voltage waveform is created with only ten IGBTs, a DC-Source, and two capacitors. In the proposed nine-level inverter, the capacitor voltage is balanced utilizing a simple control approach to regulate the flying capacitor (FC) voltages actively. Here described a simple logic gate-based pulse-width modulation technique that ensures capacitor power balancing. The proposed inverter operation and capability are validated by experimental results derived from a laboratory prototype. Finally, by contrasting the new and standard inverter topologies, the virtues of the suggested architecture by the number of devices and price of the equipment are highlighted, and it is a simpler structure that requires less space and footprint area. © 2022 John Wiley & Sons Ltd.
  • No Thumbnail Available
    Item
    A single-source nine-level boost inverter with new optimal switching scheme for EV applications
    (John Wiley and Sons Ltd, 2024) Aditya, K.; Yellasiri, Y.; Shiva Naik, B.; Nageswar Rao, B.; Panda, A.K.
    The importance of two-level inverters is well known in EV applications; it contains significant unwanted harmonics in generated voltage. One of the most efficient way to increase power quality is to replace a two-level inverter with a multilevel inverter (MLI). The MLI's essence considerably reduces total harmonic distortion. Eventually, the size of the filter requirement also will minimize. Because of the increased device count and capacitor voltage balance issues, these converters have a slew of reliability concerns. To mitigate these drawbacks, a novel switched-capacitor based nine-level inverter (SC-NLI) structure with a new optimal control switching technique for electric vehicle (EV) applications is proposed in this paper. The proposed SC-NLI structure comprises 10 switches, one diode, and two capacitors. The proposed structure's circuit description, modes of operation, proper component selection, and a new optimal switching scheme are presented. A discussion about the comparative analysis of suggested topology with currently developed MLI structures is presented. In addition, to the simulation results, experimental tests are conducted under various load conditions to evaluate the proposed SC-NLI structure. © 2023 John Wiley & Sons Ltd.