Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Filters

2018 - 20203

Settings

Author: search.filters.author.Shetty K, V.Subject: search.filters.subject.degradation

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Visible light-induced photocatalytic degradation of Reactive Blue-19 over highly efficient polyaniline-TiO2 nanocomposite: a comparative study with solar and UV photocatalysis
    (Springer Verlag service@springer.de, 2018) Kalikeri, S.; Kamath, N.; Gadgil, D.J.; Shetty K, V.
    Polyaniline-TiO2 (PANI-TiO2) nanocomposite was prepared by in situ polymerisation method. X-ray diffractogram (XRD) showed the formation of PANI-TiO2 nanocomposite with the average crystallite size of 46 nm containing anatase TiO2. The PANI-TiO2 nanocomposite consisted of short-chained fibrous structure of PANI with spherical TiO2 nanoparticles dispersed at the tips and edge of the fibres. The average hydrodynamic diameter of the nanocomposite was 99.5 nm. The band gap energy was 2.1 eV which showed its ability to absorb light in the visible range. The nanocomposite exhibited better visible light-mediated photocatalytic activity than TiO2 (Degussa P25) in terms of degradation of Reactive Blue (RB-19) dye. The photocatalysis was favoured under initial acidic pH, and complete degradation of 50 mg/L dye could be achieved at optimum catalyst loading of 1 g/L. The kinetics of degradation followed the Langmuir-Hinshelhood model. PANI-TiO2 nanocomposite showed almost similar photocatalytic activity under UV and visible light as well as in the solar light which comprises of radiation in both UV and visible light range. Chemical oxygen demand removal of 86% could also be achieved under visible light, confirming that simultaneous mineralization of the dye occurred during photocatalysis. PANI-TiO2 nanocomposites are promising photocatalysts for the treatment of industrial wastewater containing RB-19 dye. © 2017, Springer-Verlag GmbH Germany, part of Springer Nature.
  • No Thumbnail Available
    Item
    Solar light-driven photocatalysis using mixed-phase bismuth ferrite (BiFeO3/Bi25FeO40) nanoparticles for remediation of dye-contaminated water: kinetics and comparison with artificial UV and visible light-mediated photocatalysis
    (Springer Verlag service@springer.de, 2018) Kalikeri, S.; Shetty K, V.
    Mixed-phase bismuth ferrite (BFO) nanoparticles were prepared by co-precipitation method using potassium hydroxide as the precipitant. X-ray diffractogram (XRD) of the particles showed the formation of mixed-phase BFO nanoparticles containing BiFeO3/Bi25FeO40 phases with the crystallite size of 70 nm. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the formation of quasi-spherical particles. The BFO nanoparticles were uniform sized with narrow size range and with the average hydrodynamic diameter of 76 nm. The band gap energy of 2.2 eV showed its ability to absorb light even in the visible range. Water contaminated with Acid Yellow (AY-17) and Reactive Blue (RB-19) dye was treated by photocatalysis under UV, visible, and solar light irradiation using the BFO nanoparticles. The BFO nanoparticles showed maximum photocatalytical activity under solar light as compared to UV and visible irradiations, and photocatalysis was favored under acidic pH. Complete degradation of AY-17 dyes and around 95% degradation of RB-19 could be achieved under solar light at pH 5. The kinetics of degradation followed the Langmuir–Hinshelhood kinetic model showing that the heterogeneous photocatalysis is adsorption controlled. The findings of this work prove the synthesized BFO nanoparticles as promising photocatalysts for the treatment of dye-contaminated industrial wastewater. © 2018, Springer-Verlag GmbH Germany, part of Springer Nature.
  • No Thumbnail Available
    Item
    Floating bed reactor for visible light induced photocatalytic degradation of Acid Yellow 17 using polyaniline-TiO2 nanocomposites immobilized on polystyrene cubes
    (Springer, 2020) Nair, V.R.; Shetty K, V.
    In the present study, PANI-TiO2 nanocomposites have been used in suspended and immobilized form for photocatalytic degradation of Acid Yellow 17 (AY-17) dye under visible light. PANI-TiO2 nanocomposites were immobilized in polystyrene cubes to form PANI-TiO2 @ polystyrene cubes. The nanocomposites were found to be visible light active both in suspended and immobilized form. PANI-TiO2 nanocomposite with 13% TiO2 loading was found to be the optimum in terms of maximum degradation of AY-17. The efficiency of floating bed photoreactor (FBR) operated in liquid recycle mode using PANI-TiO2 @ polystyrene cubes was studied. In this reactor, around 89% degradation of 1 L of AY-17 with an initial concentration of 10 mg/L could be achieved with 2.83 g/L per pass of immobilized catalyst. The FBR operated with PANI-TiO2 @ polystyrene cubes has exhibited good performance as a photocatalytic reactor and may be recommended over other conventional photo reactors for treatment of wastewater contaminated with synthetic dyes. The kinetics of degradation of AY-17 by photocatalysis under visible light with suspended PANI-TiO2 and PANI-TiO2 @ polystyrene cubes followed first-order kinetics. The values of apparent kinetic parameter for degradation by immobilized photocatalysts are lower than the corresponding kinetic parameter for suspended photocatalysts. It confirms the existence of diffusional limitations in photocatalysis by PANI-TiO2 @polystyrene cubes. © 2020, Springer-Verlag GmbH Germany, part of Springer Nature.