Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Visible light mediated photocatalytic dye degradation using Ag2O/AgO-TiO2nanocomposite synthesized by extracellular bacterial mediated synthesis - An eco-friendly approach for pollution abatement(Elsevier Ltd, 2021) Kulal, D.; Shetty K, V.A large quantity of dyes released with textile industry effluents has raised a lot of concern due to their harmful and toxic effect on the ecosystem. The present study reports a novel method for the synthesis of visible light active photocatalyst by a bacterial based synthesis approach for the degradation of dyes. Ag2O/AgO-TiO2 nanocomposite particles with an average crystallite size of 38» nm, containing rutile TiO2 were synthesized using the cell free supernatant of the culture broth of Alcaligenes aquatilis. The particles were spherical, distinct with average particle size of 39.6» nm. The particles were found to be visible light active with the band gap energy value of 1.5» eV and photocatalytically active in the degradation of Reactive Blue 220 (RB 220). Around 96% of 100» ppm dye could be degraded in 90» min under visible light irradiation using the biosynthesized Ag2O/AgO-TiO2 nanocomposites. The biosynthesized nanocomposite exhibited good solar photocatalytic activity not only in the degradation of RB 220, but also in degrading the azo dyes, such as Acid Yellow 17 and Methyl Orange. The activity of biosynthesized nanocomposite was found to be better than that of Bio-TiO2. These results demonstrated an eco-friendly, potentially economical and greener method for the synthesis of Ag2O/AgO-TiO2 nanocomposites, with involvement of minimum technical challenges in terms of downstream processing and less energy consumption, with a broad scope of application in solar light mediated photocatalytic treatment of waste water. © 2021 Elsevier Ltd.Item Solar light active biogenic titanium dioxide embedded silver oxide (AgO/Ag2O@TiO2) nanocomposite structures for dye degradation by photocatalysis(Elsevier Ltd, 2021) Deekshitha; Shetty K, V.A novel method of synthesis of TiO2 embedded AgO/Ag2O nanocomposite using the cell free culture supernatant of the bacteria Alcaligenes aquatilis at room temperature is reported. Highly crystalline nanocomposite containing rutile TiO2, Ag2O and AgO was formed by the biosynthesis route. AgO/Ag2O particles were embedded in TiO2 and the average particle size was found to be 13.4 nm. The synthesized nanocomposite with a band gap energy of 1.75 eV was found to degrade 100 ppm Reactive Blue 220 dye almost completely in acidic pH at a catalyst loading of 1 g/L under visible light irradiation in 90 min. The nanocomposites also showed good photocatalytic activity under solar light, and thus can be used effectively in solar driven photocatalysis for waste water treatment. © 2021 Elsevier LtdItem Bioleaching of zinc from e-waste by A. aquatilis in fluidised bed bioreactor(Taylor and Francis Ltd., 2023) Minimol, M.; Shetty K, V.; Saidutta, M.B.Technological advancements with the use of new-generation electronic devices and accumulated electronic wastes (e-wastes) raise environmental concerns. E-waste, especially mobile phone Printed Circuit Boards (PCBs) is a rich source of metals. Bioleaching, a microbe-mediated metal dissolution process is employed for the recovery of metals. The operational parameters like particle size, inoculum percentage (v/v) and e-waste load (w/v) were optimised for Zn bioleaching by Alcaligenes aquatilis in shake flasks and fluidised bed bioreactor (FBR). The e-waste feed particle size of 0.175 mm and 5% inoculum was found to be the optimum for Zn bioleaching in both the shake flask and FBR. The optimum e-waste load was 5% in the shake flask and 2% in FBR. The maximum recovery of Zn was 0.6 mg/g (13.73%) in the shake flask and 0.57 mg/g (13%) in FBR, implying that FBR exhibits similar efficiency of Zn bioleaching as in the shake flask. Further three sequential batch runs increased the recovery to a maximum of 1.66 mg/g from 4.37 mg/g Zn present in the PCBs ie., 38% Zn recovery. This shows that efficient bioleaching of Zn on a larger scale can be achieved with sequential batches and applied for the simultaneous recovery of metals from PCBs. © 2023 Indian Institute of Chemical Engineers.Item Performance of Fluidized-Bed Bioreactor in Copper Bioleaching from Printed Circuit Boards using Alcaligenes aquatilis(Springer Science and Business Media B.V., 2024) Madhavan, M.; Shetty K, V.; Saidutta, M.B.Technological advancements have led to a demand for modern electronic gadgets and outdated ones discarded as electronic waste (e-waste). The printed circuit boards (PCBs) constitute a significant portion of these wastes that contain hazardous substances that mandate e-waste management. The rich source of precious and base metals makes it a resource for urban mining. Bioleaching, a process of biohydrometallurgy, an alternative to conventional heat and chemical-based metal recovery processes, can be efficiently applied for metal recovery from these wastes in an environmentally safe manner. The process parameters like particle size, inoculum size (v/v), and e-waste load (w/v) for bioleaching of Cu from PCBs in a Fluidized-Bed bioreactor (FBR) and shake flask using Alcaligenes aquatilis as bioleaching agent were optimized. The bioleaching of 47.99% and 37.54% of Cu from PCBs were achieved in shake flask and FBR, respectively. The optimal conditions of Cu bioleaching were 0.175 mm particle size, 5% (v/v) inoculum, and 2% (w/v) e-waste load with 169.45 mg/g and 132.55 mg/g of Cu recovery in shake flask and FBR at 84 and 96 h, respectively. Further, the Cu bioleaching was carried out in sequential batches to improve the recovery with the optimized conditions. There was a prominent increase in the cumulative %Cu bioleaching of about 80.02% after three sequential batch experiments from PCBs with an initial Cu concentration of 353.09 mg/g. The present study proves that sustainable heterotrophic bioleaching of Cu can be efficiently achieved in a Fluidized-bed bioreactor operated in sequential batch mode by Alcaligenes aquatilis. Graphical Abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer Nature B.V. 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.Item Extracellular biosynthesis of CuO-TiO2 nanocomposites using Alcaligenes aquatilis for the photodegradation of reactive and azo dyes under visible light irradiation(Springer, 2025) Agarwalla, S.; Shetty K, V.In this study, CuO/TiO2 nanocomposites were biologically synthesized using cell-free supernatant (CFS) of Alcaligenes aquatilis growth culture by two-step synthesis method, one-pot method with sequential addition of precursors, and one-pot method with simultaneous addition of precursors. The one-pot method with simultaneous addition of precursors was found to be the best method for the synthesis in terms of degradation of reactive blue-220 (RB-220) and acid yellow-17 (AY-17) dyes under visible light irradiation. CuO/TiO2 nanocomposite was found to have the crystallite size of 14.7nm and the bandgap energy of 2.5 eV. The effect of synthesis parameters such as synthesis time, pH of CFS, and the ratio of Cu to Ti in the synthesis mixture on the photocatalytic degradation efficacy of these nanocomposite structures under visible light irradiation was studied. The optimum conditions for the synthesis of CuO/TiO2 nanocomposite particles by one-pot method with simultaneous addition of precursors were found to be pH 12 of CFS, synthesis duration of 24 h, and molar ratio of Cu to Ti in the synthesis mixture as 1:22 for RB-220 dye and 1:25 for AY-17 degradation. CuO/TiO2 nanocomposite particles synthesized under the optimum conditions and without any calcination could degrade RB-220 and AY-17 dyes completely in 120 min and 150 min, respectively. The kinetics of degradation of RB-220 and AY-17 by CuO@TiO2 nanocomposite particles followed first-order kinetic model with rate constant of 0.028 min?1 and 0.018 min?1, respectively. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023.