Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Shetty, A.R.Subject: search.filters.subject.Scanning electron microscopy

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Ultrasound induced multilayer Ni-Co alloy coatings for better corrosion protection
    (Elsevier B.V., 2017) Shetty, A.R.; Hegde, A.
    Ultrasound induced multilayer Ni-Co alloy coatings have been developed galvanostatically by periodic modulation of ultrasound effect, parallel to the process of conventional electroplating. Multilayer Ni-Co alloy having alternative layers of different composition were developed by turning the sonicator probe, ON and OFF periodically, while keeping the current density (c.d.) constant. The deposition conditions, in terms of pulsing power density (p.d.) and degree of layering have been optimized for the highest performance of coating against corrosion, evaluated by electrochemical testing methods. Corrosion data revealed that under optimal conditions, multilayer Ni-Co alloy coating having 150 layers, represented as (Ni-Co)2/2/150 is about 11 times more corrosion resistant than its homogeneous coating, represented as (Ni-Co)4.0 A dm ? 2, deposited from the same bath for same duration of time. Improved corrosion resistance of multilayer Ni-Co alloy coatings was attributed to an increase in the number of interfaces, separating the layers of alloys of different composition, affected due to periodic pulsing of the sonicator. The dependence of corrosion behaviors at different combination of c.d. and p.d., on surface morphology, composition and phase structures were analyzed, using scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS) and X-ray diffraction (XRD) technique, respectively. Experimental results are compared, and discussed. © 2017 Elsevier B.V.
  • No Thumbnail Available
    Item
    Sol-gel electrospun ZnMn2O4 nanofibers as bifunctional electrocatalysts for hydrogen and oxygen evolution reactions
    (Institute of Physics Publishing helen.craven@iop.org, 2019) Shamitha, C.; Shetty, A.R.; Hegde, A.C.; Anandhan, S.
    Electrochemical water-splitting has gained significant attention for the development of next generation fuels. The present work is an investigation on the electrocatalytic activity towards both Oxygen Evolution Reaction (OER) and Hydrogen Evolution Reaction (HER) of ZnMn2O4 (ZMO) nanofabrics synthesized by sol-gel electrospinning followed by calcination (at 500, 600 and 700 °C). Poly(styrene-co-acrylonitrile) was used as the polymeric binder for the production of nanofabrics. The morphological features of ZMO nanofabrics were studied by scanning electron microscopy and field emission scanning electron microscopy. The electrocatalytic behavior of ZMO nanofabrics obtained at different calcination temperatures was evaluated using chrono-potentiometry, cyclic voltammetry, and linear sweep voltammetry in an alkaline medium (1 M KOH). The ZMO nanofabrics calcined at 500 °C exhibited the maximum electrocatalytic activity towards HER. This can be ascribed to their superior specific surface area (79.5 m2 g-1). The nanofabrics calcined at 700 °C displayed the least potential for O2 evolution and hence they are considered to be effective for OER. The results prove that ZMO nanofabrics are promising candidates as bifunctional electrocatalysts for water-splitting applications. © 2019 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    Effect of Magnetic Field on Corrosion Performance of Ni–Co Alloy Coatings
    (Springer Science and Business Media Deutschland GmbH, 2023) Shetty, A.R.; Hegde, A.C.
    The corrosion protection efficacy of Ni–Co alloy coatings was tried to improve by magnetoelectrodeposition (MED) approach. The magnetic field of varying strength (B) was applied in perpendicular and parallel to the direction of diffusion of metal ions, simultaneously to the process of deposition. The corrosion behaviour of the deposited coatings was studied through electrochemical DC method and results revealed that Magneto-electrodeposited (MED) Ni–Co alloys coatings were found to be more corrosion resistant than their conventionally electrodeposited (ED) counterparts. Moreover, the effect of magnetic field is more pronounced in perpendicular field direction and was explained by Lorentz force. Under optimal condition, MED Ni–Co alloy coating obtained at a magnetic field intensity of B = 0.3 T (Perpendicular) was found to be less prone to corrosion than its ED alloy (B = 0 T) counterpart. The increased limiting current density (iL) of Co2+ ions in turn increases the corrosion resistant properties of MED Ni–Co alloy coatings. The effect of magnetic field on improved corrosion resistance of the deposited coatings have been investigated in terms of their changed surface morphology, composition, phase structure and surface roughness using Scanning electron microscopy (SEM), Energy dispersion spectroscopy (EDS), X-Ray diffraction (XRD) technique and Atomic Force Microscopy (AFM) respectively. © 2022, The Author(s).