Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
10 results
Search Results
Item Influence of Process Variables on the Ultimate Tensile Strength of Friction Stir Welded AA6061 Matrix Composite(Springer Nature, 2021) Shettigar, A.; Prabhu B, S.R.; Herbert, M.A.; Rao, S.S.The present study is focused on the application of the friction stir welding process (FSW) to weld aluminium matrix composites (AMCs). Joints are formed by varying FSW process variables such as tool revolving speed (TRS), tool traverse speed (TTS) and the tool pin geometry (TPG). Influence of these parameters on the ultimate tensile strength (UTS) of the joints is investigated. Process variable optimization is done using Taguchi L18 orthogonal array design. Optimum process variables are determined and confirmed by confirmation tests based on the analysis of variance. © 2021, Springer Nature Singapore Pte Ltd.Item Mechanical Properties and Microstructural Characteristics of Friction Stir Welded Aluminium Matrix Composite(Springer Nature, 2021) Subramanya, B.; Shettigar, A.; Herbert, M.A.; Rao, S.S.Nowadays, friction stir welding process appears a promising technique to weld difficult materials by conventional welding techniques. Present study aims to analyse the significance of process variables on the mechanical behaviour of aluminium matrix composite joined by friction stir welding (FSW) technique. FSW is carried out at different welding conditions using conventional threaded cylindrical tool (TC). Microstructural study indicates several tiny reinforced particles are uniformly distributed in the nugget region. Recrystallization and grin refinement are observed in the weld area. Nugget region exhibits higher hardness compared to the base material. Joint efficiency of up to 89% is obtained for the FS-welded composite. The fracture surface reveals that the matrix undergoes a ductile fracture whereas reinforced particles exhibit brittle fracture. © 2021, Springer Nature Singapore Pte Ltd.Item Experimental investigation of joint properties of friction stir welded aluminium matrix composite(Elsevier Ltd, 2021) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.The present study is focused on welding of particulate aluminium matrix composites using friction stir welding process and investigating the influence of various process variables on the joint properties. The microstructural study and mechanical behaviors such as tensile strength and hardness of the weld zone were measured. Microstructural studies showed that process variables play pivotal role in refinement of grains. Compared to the top of the weld region, smaller grains were formed at the bottom due to variation in the heating effect. Measurement of the tensile strength and hardness of the weld zone, indicated that process variables plays important role in controlling the joint properties. Beyond the optimum range of process variables, the joint strength of welded part deteriorates due to the insufficient stirring and lack of plasticization leads to defect formation. Joint welded with traverse speed of 100 mm/min and revolution speed of 1200 rpm exhibited better mechanical properties. © 2021 Elsevier Ltd. All rights reserved.Item A comprehensive review of friction stir techniques in structural materials and alloys: challenges and trends(Elsevier Editora Ltda, 2022) Prabhakar, D.A.P.; Shettigar, A.; Herbert, M.A.; Gowdru Chandrashekarappa, M.; Pimenov, D.Y.; Giasin, K.; Prakash, C.Friction-stir techniques are the potential alternative to fusion-based systems for processing and welding metallic alloys and other materials. This review explores the advantages, applications, limitations, and future directions of seven friction-based techniques namely, Additive Friction Stir Deposition (AFSD), Friction Stir Additive Manufacturing (FSAM), Friction Stir Welding (FSW), Friction Stir Processing (FSP), Friction Surfacing (FS), Friction Stir Spot Welding (FSSW), and Friction Stir Lap Welding (FSLW). The basic underlying principle of these processes uses friction as a thermal energy source to weld/process/deposit materials. The common control parameters of all friction stir processing techniques are axial force, rotational speed, and weld or traverse speed. In addition, tool profiles and tool dimensions are known to influence the weld quality. The tool's rotational speed and axial force generate friction between the workpiece and tool material interface, which could plasticize the material. The additive powder bed friction stir process (APBFSP) is another new solid-state manufacturing technique that focus on fabricating the polymer matrix nanocomposites (PNC). In this, a hollow tool like AFSD and the fundamental principle of FSP are combined. The said parameters affect the quantity of material getting deposited/welded. However, weld speed/traverse speed alters the weld quality, and higher traverse speed results in porosity and voids in the welded/deposited/processed region. The only difference between AFSD and other friction stir techniques (FSTs) is that in the AFSD technique, the hollow rotating tool comprises two protrusions with different tool profiles (cylindrical, threaded cylindrical, and tapered cylindrical, square) used. Threaded cylindrical profile and tool steel as the tool material is the most commonly employed in FSTs. Apart from that, tungsten carbide is preferred for hard materials. The working principles and process parameters of FSTs that affect the part quality are discussed in detail. The above review gives the reader an understanding of the domain of FSTs that can be researched further. A summary of some of the potential research works with objectives, process parameters, and outcomes is highlighted. This will provide the readers with an overview of the work carried out by researchers across the globe. Finally, the potential research gaps for future directions to be explored soon across the globe are outlined. © 2022 The Author(s).Item Microstructure and hardness of friction stir welded aluminium-copper matrix-based composite reinforced with 10 wt-% SiCp(Maney Publishing, 2014) Shettigar, A.; Veeresh Nayak, C.; Herbert, M.A.; Rao, S.S.In the present work, an attempt has been made to join aluminium-copper matrix-based composite reinforced with 10 wt-% SiCp, by the friction stir welding technique, at different combinations of tool rotational speed (710, 1000 and 1400 rev mm1) and welding speed (50, 63 and 80 mm min1) using square profiled friction stir welding tool. Welding parameters play a predominant role in improving the mechanical strength by minimising the defects. A good number of defect free joints were obtained at various combinations of rotational speed and welding speed. It has been observed that, rotational speed and welding speed have strong influence on microstructure, Vickers hardness and quality of welds. © W. S. Maney &Son Ltd 2014.Item Experimental assessment of FSW process to join AA6061/Rutile composite and parametric optimization using TGRA(IOP Publishing Ltd, 2021) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.Present study is focused on investigating the effect of various friction stir welding (FSW) process variables on AA6061/Rutile composites welding quality. FSWof composites was performed considering tool geometry (Tg), welding speed (Ws) and rotational speed (Ns) as ideal parameters for multi-response optimization. Experiments were designed based on the L9 orthogonal array. Analysis of variance (ANOVA) was utilized to evaluate the effects of these welding process variables on output responses namely hardness and ultimate tensile strength (UTS). Main effects plots were drawn to found out the optimal levels of these process parameters. Multi-response optimization of the welding process has been performed using Taguchi's grey relational analysis (TGRA). Analysis revealed that welding speed of 90mmmin-1, a tool with a square pin, and rotational speed of 1000 rpm produced an FSWjoint with excellent mechanical properties. Microstructure analysis revealed that refinement in the grain structure and redistribution of reinforced particles helped in improved joint strength. © 2021 IOP Publishing Ltd.Item Influence of process variables on joint attributes of friction stir welded aluminium matrix composite(Taylor and Francis Ltd., 2022) Prabhu B, S.R.; Shettigar, A.; Gowdru Chandrashekarappa, M.; Herbert, M.A.; Rao, S.S.The microstructure and mechanical attributes of the friction stir welded aluminium metal matrix composites (AMCs) are reported in this paper. Impacts of friction stir welding (FSW) process variables on the mechanical properties are evaluated. Metallographic studies showed that variation in welding process variables’ plays a vital role in obtaining recrystallised equiaxed fine-grain structures. The formed joint region indicates a gradual reduction in grain size as it moves from top to bottom of the weld region due to variation in the heat generation. Process variables like tool movement along the joint direction and tool revolution speed govern the joint strength of AMCs. Beyond the optimum values of process variables, the weld quality and joint strength of the welded part deteriorate due to the inappropriate stirring of the material at the weld region. The highest joint strength obtained for tool movement along the direction was 80 mm/min, and the revolution of the tool was 1000 rpm. © 2020 Informa UK Limited, trading as Taylor & Francis Group.Item Parameter investigation and optimization of friction stir welded AA6061/TiO2 composites through TLBO(Springer Science and Business Media Deutschland GmbH, 2022) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.This paper explicates the joining of AA 6061/TiO2 composites by the friction stir welding (FSW) process. FSW experiments were conducted as per the three factors, three-level, central composite ivy– face-centered design method. Mathematical relationships between the FSW process parameters, namely tool geometry, welding speed, and tool rotational speed, and the output responses such as hardness, yield strength, and ultimate tensile strength were established using response surface methodology. Adequacies of established models were assessed through the analysis of variance method. Further, the paper elucidates the application of the teaching–learning-based optimization (TLBO) algorithm to identify the optimal values of input variables and to obtain an FSW joint with superior mechanical properties. The optimized experimental condition obtained from the TLBO yields an FSW joint with a UTS of 174 MPa, yield strength of 120 MPa, and hardness of 126HV. The study revealed that the result of the TLBO algorithm matched the findings of the FSW experiments. © 2021, The Author(s).Item Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique(Sharif University of Technology, 2022) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.In the friction stir welding process, preferred joint property is vastly reliant on the selection of optimal welding conditions. The present study aims to use the Taguchi technique to find the optimal process conditions for achieving superior Ultimate Tensile Strength (UTS) in friction stir welded Aluminum Matrix Composite (AMC) joints. AMCs reinforced with rutile particles which have a potential application in the aerospace, automotive, and marine industries are used in the present work. Taguchi parametric design technique was used to identify the effect of rotational speed, tool traverse speed, and tool geometry on joint strength. Taguchi approach confined the optimum level of process variables and these variables were optimized. The investigation showed that the parameters within the selected value range will seriously affect the output. The predicted value of the output response was 155.48 MPa, which was validated by further experiments using the optimum process variables. Analysis Of Variance (ANOVA) results indicated that the UTS of the composite joint is mainly affected by the tool traverse speed followed by rotational speed, and tool geometry. The microstructural study unveiled that grain size is dependent on process variables and finer grains offer better joint properties. © 2022 Sharif University of Technology. All rights reserved.Item Influence of machine variables on the microstructure and mechanical properties of AA6061/TiO2 friction stir welds(Taylor and Francis Ltd., 2023) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.The present work explicates the joining of TiO2 (rutile) particles reinforced aluminium matrix composites (AMCs) through the friction stir welding (FSW) technique. Joining of AMCs using conventional fusion welding techniques faces a lot of challenges, which can be overcome by the FSW process. The effect of the two most critical process variables, welding speed, and tool rotational speed on the grain structure of the joint and on the mechanical behaviours was evaluated. The study revealed that machine variables regulate the quantity of heat input, heat exposure duration, and rate of cooling, thereby, significantly altering the grain size in the weld region and mechanical behaviour of the joint. The tool rotational speed had a substantial impact on the joint strength, whereas tool traverse speed facilitates homogeneous dispersion of reinforced particles in the matrix. The ‘W’-shaped hardness variation profile was observed across the weld zone, showing the highest hardness in the weld stir zone. The UTS of the welded specimen, measured across the joint was almost equal to the parent material with fracture occurring at the interface of the heat-affected and the thermo-mechanically affected zone which was the weakest point in the weld region. © 2022 Informa UK Limited, trading as Taylor & Francis Group.