Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 2 of 2
  • Item
    A Novel Single-Layered Dual-Wideband Circularly Polarized Asymmetric Slot Antenna for Wireless Applications
    (Electromagnetics Academy, 2024) Shankaraiah, P.H.; Shet, N.S.V.; Kandasamy, K.
    This work focuses on the design and implementation of a dual-wideband asymmetric square-shaped slot radiator with coplanar waveguide (CPW) feed for circular polarization (CP) characteristics. The proposed radiator has inward ground plane extensions in the form of square and rectangular strips on the diagonal corners of the slot. By optimizing the size of strips, a dual-band antenna with CP behaviour is obtained. The inverted L-shaped grounded strip improves axial ratio bandwidth (ARBW). The extended signal line terminated in a wide tuning stub significantly improves impedance bandwidth (IBW) and also further enhances ARBW. The designed asymmetric slot radiator is fabricated using an FR-4 substrate material of dimensions 50×50×1.6 mm3. This antenna design gives flexibility to alter polarization sense at the dual frequency bands. Further, edge effects are analyzed through electric field distribution, and their impact on impedance and AR characteristics are studied. It is designed, fabricated, and tested, and shows right-hand circular polarization (RHCP) response at 3 GHz and 7.5 GHz in the +Z direction. The experimentally verified results show −10-dB IBWs of 40.12% (range from 2.61 GHz to 3.92 GHz) and 40.21% (range from 6 GHz to 9.02 GHz), and 3-dB ARBWs are 20% (range from 2.70 GHz to 3.30 GHz) and 40.21% (range from 6 GHz to 9.02 GHz) at the resonance bands. The experimentally measured and simulated performance parameters of the prototype are in close agreement. The proposed perturbed slot radiator is well suited for Wi-Fi 6E communication and remote sensing applications. © 2024, Electromagnetics Academy. All rights reserved.
  • Item
    Metamaterial based stepped microstrip line fed quad-band dual-sense circularly polarized slot antenna for wireless applications
    (Cambridge University Press, 2025) Shankaraiah, P.H.; Shet, N.S.V.; Kandasamy, K.
    This research proposes a low-complexity, low-profile square-shaped quad-band dual-sense circularly polarized (CP) perturbed slot antenna with stepped microstrip feed for C-band radar and satellite applications. The proposed antenna is characterized by characteristic mode analysis. The proposed design has a square-shaped slot with diagonally opposite symmetric rectangular corner extensions. Multiband resonance is achieved by exciting the split ring resonator (SRR), cross strips and annular ring structure using the stepped microstrip line-fed slot radiator. The slot antenna and a metallic ring resonate at 1.64 and 8.2 GHz, respectively, showing left-hand circular polarization response, whereas the SRR and cross strips resonate at 3.6 and 6.6 GHz, respectively, exhibiting right-hand circular polarization radiation at these resonance bands. Hence, the proposed design shows quad-band performance with dual-sense CP behavior. Furthermore, the proposed antenna allows for independent tuning of polarization sense at resonance frequencies. The proposed design uses a low-cost FR-4 material as a substrate of dimensions 60 × 60 × 1.6 mm3. The experimentally measured results are in close agreement with the simulated performance parameters of the prototype. © The Author(s), 2025. Published by Cambridge University Press in association with The European Microwave Association.