Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
8 results
Search Results
Item Novel RGO-ZnWO4-Fe3O4 nanocomposite as high performance visible light photocatalyst(Royal Society of Chemistry, 2016) Mohamed, M.M.J.; Shenoy, U.S.; Bhat, D.K.A novel RGO-ZnWO4-Fe3O4 nanocomposite is synthesized by a microwave irradiation method and its catalytic activity for the photo degradation of Methylene Blue (MB) is investigated. The prepared nanocomposites are characterized by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), Raman spectroscopy, photoluminescence spectroscopy (PL) and UV-visible spectroscopy. The visible light photocatalytic activities of the prepared nanocomposites are investigated using a MB dye solution. It is noteworthy that RGO-ZnWO4-Fe3O4 nanocomposites exhibited relatively high photocatalytic activity compared to ZnWO4-RGO and pure ZnWO4 on MB in aqueous solution. This enhanced rate is due to the ability of the graphene in the RGO-ZnWO4-Fe3O4 composite to support carrier exploitation efficiently by tolerating the photo excited electron-hole pairs and thus encouraging oxidative degradation of the pollutants. This work could be extended to other organic pollutants as well and could provide new insights into ternary nanocomposites as high performance photocatalysts and their application in waste water treatment. © 2016 The Royal Society of Chemistry.Item NiWO4-ZnO-NRGO ternary nanocomposite as an efficient photocatalyst for degradation of methylene blue and reduction of 4-nitro phenol(Elsevier Ltd, 2017) Mohamed, M.; Shenoy, U.S.; Bhat, D.K.A novel NiWO4-ZnO-NRGO ternary nanocomposite has been efficiently synthesized by decorating nitrogen doped reduced graphene oxide (NRGO) with zinc oxide and nickel tungstate nanoparticles via a facile microwave irradiation technique and its capability to catalyze photodegradation of methylene blue (MB) dye in aqueous solution and reduction of 4-nitro phenol (4-NP) to 4-amino phenol (4-AP) using sodium borohydride was explored. The as-synthesized nanocomposite was characterized by X-ray diffraction (XRD), Raman spectroscopy, Brunauer-Emmett-Teller (BET) analysis, energy dispersive X-ray (EDX) analysis, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) spectroscopy and diffuse reflectance spectroscopy (DRS) techniques. The photocatalytic activity of the as-synthesized nanocomposite estimated through the photodegradation of MB under visible light irradiation showed 9 times improvement over pure NiWO4. It also showed excellent catalytic activity in reduction of 4-NP to 4-AP. The material also showed excellent stability and reusability. The entire study revealed that the novel NiWO4-ZnO-NRGO ternary nanocomposite can act as a promising bifunctional photocatalyst for environmental remediation and industrial application. © 2017 Elsevier LtdItem Tuning the Photocatalytic Activity of SrTiO3 by Varying the Sr/Ti Ratio: Unusual Effect of Viscosity of the Synthesis Medium(American Chemical Society service@acs.org, 2018) Bantawal, H.; Shenoy, U.S.; Bhat, D.K.SrTiO3 nanostructures were successfully synthesized in various alcohols as cosolvent as well as surfactant by a facile solvothermal method. The as-synthesized catalysts were characterized by X-ray diffraction technique, scanning electron microscopy, energy-dispersive X-ray analysis, Brunauer-Emmett-Teller analysis, diffuse reflectance spectroscopy, and photoluminescence spectroscopy. The possible formation mechanism of SrTiO3 in the presence of these alcohols is discussed, and the effect of these alcohols on the structure, Sr/Ti atomic ratio, and optical properties is related to the photocatalytic activity. First principles calculations were made use of to determine the effect of defects on the electronic structure and the band gap. The photocatalytic activity of these catalysts was evaluated by taking methylene blue as a model pollutant under visible light irradiation. It was found that the photocatalytic activity of ethanol-mediated SrTiO3 was found to be higher than the other samples because of the synergistic effect of high surface area and lesser defects. © 2018 American Chemical Society.Item Band Engineering of SrTiO3: Effect of Synthetic Technique and Site Occupancy of Doped Rhodium(American Chemical Society service@acs.org, 2018) Shenoy, U.S.; Bantawal, H.; Bhat, D.K.It is well known that doping of Rh into the SrTiO3 lattice introduces 4d donor levels within the band gap, which causes reduction in the gap and extends the photocatalytic activity to the visible region of the solar spectrum. The mid-gap states formed also act as recombination centers and diminish the efficiency of the material. Herein, we present a combined theoretical and experimental approach to avoid the formation of the so-called acceptor mid-gap states. For the first time, we study the effect of occupancy of Rh in the Sr site. First-principles calculations reveal that mixed occupancies of Rh into Sr and Ti sites lead to the introduction of acceptor levels within the band gap, leading to decrease in photocatalytic efficiency. A facile one-pot solvothermal approach by avoiding high-temperature calcinations is reported to obtain Rh-doped SrTiO3 nanoparticles in Rh3+ states, suppressing the formation of Rh4+ states by directing Rh toward Sr sites. The photocatalytic activity of Rh-doped SrTiO3 nanoparticles is studied in the case of degradation of methylene blue, wherein the 1.0 Rh sample was found to be highly efficient. © 2018 American Chemical Society.Item Porous Graphene Wrapped SrTiO3 Nanocomposite: Sr-C Bond as an Effective Coadjutant for High Performance Photocatalytic Degradation of Methylene Blue(American Chemical Society service@acs.org, 2019) Bantawal, H.; Sethi, M.; Shenoy, U.S.; Bhat, D.K.Porous graphene-SrTiO3 (PGST) composite prepared by a facile solvothermal method was tested for its photocatalytic activity in degradation of methylene blue (MB) dye. First-principles density functional theory calculations were also carried out to study the effect of nanocomposite formation on the electronic structure and density of states. The combined experimental and theoretical study gave insights regarding the formation of the Sr-C bond which enhanced the charge transport, effectively separating the charge carriers and reduced their recombination rate. The formation of PGST nanocomposite favorably tuned the electronic structure with decreased band gap due to introduction of the hybridized states extending the absorption to the visible region of electromagnetic spectrum. The microscopy studies revealed loofah like PG wrapped SrTiO3 nano structures with contusions providing high surface area facilitating adsorption of MB dye. Degradation of ?92% was obtained by 7.5 PGST in 120 min with high cyclic stability indicating its suitability as an efficient photocatalyst for the treatment of pollutants. © 2019 American Chemical Society.Item Vanadium-Doped SrTiO3 Nanocubes: Insight into role of vanadium in improving the photocatalytic activity(Elsevier B.V., 2020) Bantawal, H.; Shenoy, U.S.; Bhat, D.K.SrTiO3 based materials have been gaining attention recently in the field of photocatalysis due to their tunable electronic structure. Herein, we employ a facile one pot solvothermal approach for the synthesis of V doped SrTiO3 nanocubes. First principles theoretical calculations reveal that the 3 'd' dopant level introduced by V reduces the band gap and extends the absorption to the visible region of spectrum. The occupancy of Ti site by V introduces dopant states overlapping with the conduction band, eliminating the formation of mid gap recombination centres. Photocatalytic experimental studies on degradation of methylene blue dye reveals the material to be an excellent photocatalyst with high photocorrosion resistance and cyclic stability. In addition, the material is also predicted to be a potential thermoelectric material. © 2020 Elsevier B.V.Item Insights into the dopant engineering in copper-doped SrTiO3 nanocubes(Elsevier B.V., 2023) Bhat, D.K.; Uma, U.; Shenoy, U.S.In recent years, semiconductors have captivated the scientific community due to their potential to harness the abundant and sustainable energy from the sun to effectively treat water pollutants. Herein, we present combined theoretical and experimental insights into the enhanced activity of photocatalytic degradation of cationic and anionic dye viz methylene blue (100% in 90 min) and rose bengal (99.6% in 30 min) in presence of copper doped SrTiO3 catalyst. First principles density functional theory study reveals the introduction of additional states due to copper doping resulting in the decrease in the band gap making it visible light active. Experimental analysis reveals a change in the morphology from broccoli type assorted spherical particles to cubic shaped structures resulting in three times increase in the surface area as a consequence of doping copper. The adopted one pot solvothermal approach not only resulted in materials with high cyclic stability but also resulted in a versatile material, which can be applied for degradation of other dyes. © 2023Item Designing sustainable porous graphene-CaTiO3 nanocomposite for environmental remediation(Elsevier B.V., 2024) Bhat, D.K.; Bantawal, H.; Uma, P.I.; Kumar, S.P.; Shenoy, U.S.In the pursuit of sustainable energy and environmental solutions, photocatalysis has emerged as a transformative technology, harnessing the power of light to drive chemical transformations. Among the myriad photocatalytic materials, calcium titanate (CaTiO3) stands out as a promising candidate, holding the potential to revolutionize the landscape of photocatalysis. To further improvise the efficiency of CaTiO3 in this work, porous graphene-CaTiO3 nanocomposite was synthesized by a straightforward solvothermal method and its photocatalytic activity was tested for the degradation of methylene blue dye under visible light. The synthesized sample exhibited 98.1% degradation in 40 min with excellent cyclic stability. Experimental and computational analysis attributed the enhanced performance to the strong chemical interaction of CaTiO3 cuboids with PG sheets via Ti-O-C bond which led to efficient electron hole separation leading to enhanced lifetime of the charge carriers. This along with reduced band gap and increased surface area made the material a potent photocatalyst for the degradation of dyes in short duration. © 2024 The Authors