Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Selective dehydration of 1-butanol to butenes over silica supported heteropolyacid catalysts: Mechanistic aspect(Elsevier B.V., 2021) Kella, T.; Vennathan, A.A.; Dutta, S.; Mal, S.; Shee, D.Butenes are considered as important olefinic building block to produce fuels/fuel additives and commodity chemicals. In the present investigation, selective dehydration of 1-butanol to butenes was studied in a continuous-flow fixed-bed reactor using various silica-supported heteropolyacid (HPA) catalysts such as phosphotungstic acid (PTA), silicotungstic acid (STA), phosphomolybdic acid (PMA), and silicomolybdic acid (SMA) as the solid acid catalysts. The physicochemical properties of these HPA were determined by BET, powder XRD, FTIR, NH3-TPD, and Py-FTIR. The acid strength and Brønsted/Lewis (B/L) acid ratio were increased with higher loading of HPA on silica. The nature of HPA (addenda and hetero atom) and loading of HPA are important factors for the dehydration of 1-butanol and selectivity towards butenes. PTA and STA showed superior catalytic activity than PMA and SMA. The reaction temperature and WHSV also strongly affected the butanol conversion and selectivity of butenes. The selectivity of di-n?butyl ether decreases with the rising temperature from 523 K to 623 K. The isomerization of 1-butene leading to the formation of other butene isomers depends on the HPA loading, temperature, and WHSV. The presence of molybdenum addendum atom in PMA and SMA promotes dehydrogenation and hydrogenation, leading to the formation of various light hydrocarbons. The 20PTA/SiO2 catalyst afforded 99.8% selectivity towards butenes at quantitative conversion of 1-butanol, whereas the 20STA/SiO2 catalyst gave nearly 97.0% conversion of 1-butanol and 99.9% butenes selectivity at 673 K, 37.4 h?1 of WHSV. © 2021Item Synergistic Enhancement of Supercapacitor Performance: Vanadium-Substituted Phosphotungstic and Molybdic Acid Combined with Polypyrrole Using Pyridinium and Ammonium Ionic Containing Organic Cation Linkers with Improved Conductivity(John Wiley and Sons Inc, 2024) Puniyanikkottil, M.A.; Chandewar, P.R.; Shee, D.; Mal, S.S.High-performance energy-storage devices have emerged as a favored choice owing to their remarkable efficiency, sustainability, and environmental friendliness. Nowadays, polyoxometalate (POM)-based supercapacitor (SC) electrode materials have gained much attention. Herein, a few new POMs and ionic liquid (IL) composites incorporated into conducting polymer as electrode materials for SC applications are reported. The H6[PV3Mo9O40]⋅34H2O (PV3Mo9) and H6[PV3W9O40].34H2O (PV3W9) POMs are treated with tetrabutylammonium chloride and 1-butyl-4-methyl pyridinium chloride (BMP) and finally combined with polypyrrole (PPy) for the SC studies. An extensive array of analytical techniques is employed to delve into the interplay between the constituents within the composite materials, such as Fourier transform infrared spectroscopy, powder X-ray diffraction, thermogravimetric analysis, nuclear magnetic resonance (1H and 13C), Field-emission scanning electron microscopy, energy-dispersive X-ray stpectroscopy, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller surface area. The combined application of these techniques enables us to understand the interaction dynamics within composite materials comprehensively. POM–ILs combination improves the solubility issues of POMs, and doping of PPy enhances the electrochemical performances of the materials. The PV3W9–BMP–PPy symmetric SC cell shows a specific capacitance of 294.79 F g−1 and an energy density of 28.89 Wh kg−1 at 1 A g−1 current density in 0.25 M H2SO4 medium followed by an excellent cycle life of 78.6% after 10,000 galvanostatic charge–discharge cycles. The fabricated SC device is performed to light up the bulbs of red, yellow, and green light emitting diodes for 50, 30, and 28 s, respectively. © 2024 Wiley-VCH GmbH.