Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Coupled dynamic analysis of semi-submersible floating wind turbine integrated with oscillating water column WEC(Springer Science and Business Media Deutschland GmbH, 2024) Sebastian, B.; Karmakar, D.; Rao, M.The present study envisages to investigate the coupled dynamic behaviour of three configurations of a hybrid wind-wave energy system integrating Oscillating Water Column (OWC) wave energy converters to DeepCwind semi-submersible supporting an NREL (National Renewable Energy Laboratory) 5 MW wind turbine. DeepCwind semi-submersible is a platform designed specifically for the purpose of supporting floating offshore wind turbines and the stability of the platform has been well confirmed by scaled-down experiments and numerical studies. The numerical simulation for the present study is performed using the aero-hydro-servo-elastic tool OpenFAST. The dynamic responses of the hybrid platforms are determined for different operational and parked wind speed conditions of the wind turbine in irregular waves. The motion responses, tower base forces and moments, mooring tensions and power absorption of the hybrid configurations have been characterized. Furthermore, the effect of coupling between the semi-submersible platform and the OWCs is studied by comparing the results of the combined platforms with that of the uncoupled wind energy platform. The coupled dynamic analysis in the time domain shows that increasing the number of OWC helps to reduce the motion responses in heave and pitch. The capture width ratio of the system is observed to be highest for hybrid configuration with a single OWC device. The present study will be helpful in the design and analysis of hybrid floating wave-wind energy platform. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2024.Item Dynamic analysis of a semi-submersible offshore floating wind turbine combined with wave energy converters(Taylor and Francis Ltd., 2025) Sebastian, B.; Karmakar, D.; Rao, M.Hybrid wind–wave energy systems harness both offshore wind and wave energy resources using a shared floating platform, reducing capital and operational costs through common infrastructure. The present study numerically investigates the dynamic performance and power absorption of three hybrid concepts combining the DeepCwind Semi-submersible Platform (SSP) with (i) Oscillating Water Columns (OWC), (ii) Torus Wave Energy Converter (WEC), and (iii) Flap-type WEC. Frequency-domain analyses using WAMIT and time-domain simulations using OpenFAST are performed to assess platform motions, tower base moments, mooring tensions, and WEC power output for different sea states. The integration of WECs significantly improves the hydrodynamic behaviour of the DeepCwind SSP. Flap-type WECs demonstrate the best dynamic performance, reducing heave and pitch by up to 68% and 58%, and mooring tension by 54%. The OWC system achieves the highest power absorption and a 55% capture width ratio, but increases surge and pitch motions by 6% and 27%, respectively, on introducing additional loads on the system. © 2025 Informa UK Limited, trading as Taylor & Francis Group.Item Parametric study on the effect of mooring configurations on the dynamic responses of the Septon semi-submersible 5 MW floating wind turbine(Springer Science and Business Media Deutschland GmbH, 2025) Sebastian, B.; Karmakar, D.; Rao, M.Offshore floating wind turbines (FWTs) offer a promising solution for harnessing wind energy in deep waters, where fixed-bottom turbines become impractical. Over the past decade, consistent advancements in technology have significantly reduced the levelized cost of energy, making large-scale deployment of FWTs increasingly feasible. The key factors influencing both cost and performance include the design and optimization of the substructure, mooring system, and power grid. The mooring system plays a pivotal role in ensuring platform stability and minimizing excessive motions that could impact the energy production efficiency and structural integrity of the FWT. The present study investigates the effects of different mooring configurations on the dynamic response of a novel semi-submersible wind turbine platform. This study analyzes two distinct mooring arrangements, spread mooring and cross-mooring, to determine the optimal configuration. The numerical investigation takes into account multiple parametric variations, including spread angle, cross angle, mooring line diameter, and line length, assessing their effects on platform motions and mooring line tensions. Numerical simulations are performed using an aero-hydro-servo-elastic simulation, which considers the coupled interactions of wind, waves, and structural components under various irregular sea states. This study reveals that the choice of mooring configuration significantly affects both platform stability and mooring line loads. A spread mooring system with a 30–60° divergence angle is identified as the optimal configuration for minimizing platform motions while keeping mooring tensions within safe operational limits. Conversely, cross-mooring configurations tend to exhibit higher tensions, particularly at larger cross angles. The cross-moorings require a minimum of 15–35 m additional mooring length compared to spread moorings for line tension to be within safe limits. The findings from the present study offer valuable insights into the optimal design of mooring systems for floating wind turbines, contributing to enhanced performance and reliability in deep water offshore wind farms. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2025.