Faculty Publications

Now showing 1 - 3 of 3

Response of Strata and Buildings to Blast Induced Vibrations in the Presence and Absence of a Tunnel
(Springer International Publishing, 2016) Rebello, N.E.; Shivashankar, R.; Sastry, V.R.
Blast induced vibrations form an inevitable and major part of modern day construction. The changes that happen to the strata or buildings surrounding the blast are evident in a fraction of a second. Effect of damage is more pronounced in the absence/presence of the tunnel. The vibration produced due to blast may be induced due to a deep underground explosion, a surface explosion or even an in-tunnel explosion. In this study the above three situations are numerically modeled by a Distinct Element software 3DEC (3.0). Soil properties are varied representing soft and stiff strata. Further, three velocity time histories of 2, 45 and 85 Hz are used as an input in the model and are applied at three different boundaries of the model. Results of the analysis reveal that the response of building in softer strata and lower frequencies led to greater magnification of velocities and displacements compared to response of buildings in stiff strata. Presence of the tunnel led to reduction of peak velocity (PV’s) and displacements at the building top due to damping effect. PV’s at the top floor were greater than the PV’s at the bottom floor and there was an upliftment of the soil mass at the ground level. However, the upliftment in the presence of the building was lower than the upliftment in the absence of the building. Stress in the tunnel lining increased in the presence of the building, however percentage reduction of stress depends on the number of building stories. © 2016, Springer International Publishing Switzerland.
A numerical modelling approach to assess the behaviour of underground cavern subjected to blast loads
(China University of Mining and Technology, 2018) Kuili, S.; Sastry, V.R.
The paper gives an insight into the behaviour of large underground caverns which are subjected to blast loads. Caverns are generally constructed in hard rock formation which compels us to use blasting methods for the excavation works. Comparative study was done between models with intact rock mass and discontinuities to assess the stability of cavern as a result of blast loads. Numerical modelling was performed with 3 dimensional distinct element code (3DEC) to analyse the performance of cavern walls in terms of displacement and to compute peak particle velocities (PPV) both around the cavern periphery and at surface of models. Results showed that the velocity wave with higher frequency exhibited large displacements around the periphery of cavern. Computation of PPV showed that model with horizontal joint sets showed lower PPV in comparison to model with intact rock mass. PPV values were also analysed on the surface for model consisting vertical joints spaced at 4 m intervals. Comparative study of PPV on surface vertically above the blast location between models with horizontal joints spaced at 4 m and vertical joints at 4 m intervals were conducted. Results depicted higher magnitudes of PPV for model with vertical joints in comparison to model with horizontal joints. © 2018
A Numerical Modelling Approach to Assess Deformations of Horseshoe Cavern on Account of Rock Mass Characteristics and Discontinuities
(Materials and Energy Research Center, 2023) Kuili, S.; Sastry, V.R.
Caverns are massive underground openings excavated for purposes like defense installations and nuclear waste disposal which becomes challenging for weak strata consisting of fractured rock masses and may result in future calamities. This study is dedicated to ascertain stability of a horseshoe cavern in different types of granitic rock masses as well as fractured rocks. Two different types of granitic formations are accounted and displacements obtained along cavern periphery have been illustrated in the preliminary part of this study. An increment in vertical displacement at the crown of 260% and lateral displacement of almost 170% for both walls were observed for moderately weathered rock. Further, implications due to orientation and frequency of joint sets on the displacements incurred has also been explored. This study acquires its novelty by considering combinations of joint sets with varying spacings for investigating their implications on cavern walls. Presence of discontinuities depicted that horizontal joint spaced closely increased the deformation magnitude which reduced with decrement in joint frequency. Subsequently, along with horizontal joints at 4m interval, vertical and oblique joints sets were also incorporated at different frequencies. Consideration of vertical joints at 2m spacing with horizontal joints resulted in 313.2% increase in vertical displacement at cavern crown as well as 340% and 363% increase in lateral deformation at the left and right wall, respectively in comparison to intact rock. In case of oblique joints spaced at 2m with horizontal joints, increment in vertical deformation at the crown proliferated to 329% in comparison to intact rock. © 2023 Materials and Energy Research Center. All rights reserved.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results