Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Role of ZSM5 catalyst and char susceptor on the synthesis of chemicals and hydrocarbons from microwave-assisted in-situ catalytic co-pyrolysis of algae and plastic wastes(Elsevier Ltd, 2022) Suriapparao, D.V.; Tanneru, T.; Rajasekhar Reddy, B.R.; Yerrayya, A.; Bhasuru, B.A.; Pandian, P.; Prakash, S.R.; Sankar Rao, C.; Sridevi, V.; Desinghu, J.The synergetic effect between algae biomass in co-pyrolysis with synthetic plastics (polypropylene (PP), polyethylene (PE), and expanded polystyrene (EPS)) was investigated in this work. Individual feedstock pyrolysis and co-pyrolysis of algae with PP, PE, and EPS were conducted at a constant supply of microwave energy (420 J/s). Pyrolysis char was used as a susceptor in all the experiments. The average heating rate was varied in the range of ∼50–60 °C/min for achieving the final pyrolysis temperature of 600 °C. In catalytic co-pyrolysis, the ZSM-5 catalyst was used for upgrading the physicochemical properties of pyrolysis oil. The use of catalyst promoted the excessive cracking of biomass in co-pyrolysis, leading to higher gas and coke residue comparatively. The viscosity, density, and flash point of oil obtained in catalytic co-pyrolysis were significantly reduced. While the oil obtained from individual pyrolysis of algae is rich in phenolic derivatives, and that of PP, PE has aliphatic hydrocarbons, and EPS has monoaromatic hydrocarbons as major compounds. The synergistic role of plastic and biomass in co-pyrolysis was observed in the formation of products and oil composition. The bio-oil from catalytic co-pyrolysis is composed of aliphatic oxygenates, aliphatic hydrocarbons, cyclic aliphatic hydrocarbons, and phenolics. The chemicals and hydrocarbons present in the oil have a carbon number in the range of C6 to C30. An increase in carbon and hydrogen elemental composition was observed in bio-oil obtained from co-pyrolysis. © 2021 Elsevier LtdItem Synergistic effects and product yields in microwave-assisted in-situ co-pyrolysis of rice straw and paraffin wax(Institution of Chemical Engineers, 2024) Hamzah, H.T.; Sridevi, V.; Surya, D.V.; Ramesh, P.; Sankar Rao, C.; Palla, S.; Abdullah, T.A.Microwave-assisted pyrolysis is one of the most efficient methods for solid waste management. This study employed microwave-assisted catalytic co-pyrolysis to convert Paraffin wax (PW) and rice straw (RS) into valuable char, gas, and oil products. KOH and graphite were used as the catalyst and susceptor, respectively. The RS and PW blend served as the feedstock (with a blend ratio of 0–10 g). The yields of co-pyrolysis at different blending ratios of RS: PW exhibited variations in char content (ranging from 9.8% to 22.6% by wt.), oil production (ranging from 34.1% to 76.9% by wt.), and gas formation (ranging from 13.2% to 47.5% by wt.). The effects of the RS: PW ratio on the average heating rate, feedstock conversion, and product yields were also investigated. Analyses were performed to assess the synergistic impacts on product yields, average heating rates, and conversion factors. Notably, co-pyrolysis synergy led to increased oil and char production. Furthermore, we conducted FTIR analysis on the oil and char produced through the catalytic co-pyrolysis of RS: PW. In conjunction with co-pyrolysis synergy, the catalyst facilitated the formation of amides, alkenes, aliphatic compounds, and aromatic compounds. © 2023 The Institution of Chemical EngineersItem Predictive modeling of product yields in microwave-assisted co-pyrolysis of biomass and plastic with enhanced interpretability using explainable AI approaches(Elsevier B.V., 2025) Rajpurohit, N.S.; Kamani, P.K.; Lenka, M.; Sankar Rao, C.Microwave-assisted co-pyrolysis of biomass and plastic offers a transformative approach to converting waste into valuable resources such as bio-oil, biochar, and biogas, while simultaneously addressing critical environmental challenges associated with plastic disposal. This research employs explainable AI methodologies to enhance the prediction and analysis of product yields in biomass-plastic co-pyrolysis. Advanced machine learning techniques, including Decision Tree, Random Forest, Extreme Gradient Boosting (XGBoost), and Artificial Neural Networks, were utilized to model yield predictions effectively. The models were fine-tuned through hyper-parameter optimization, achieving high accuracy levels. The study emphasizes the scientific importance of integrating explainable AI with pyrolysis processes to optimize waste-to-resource recovery, contributing significantly to sustainable waste management and circular economy initiatives. Among these, the XGBoost model demonstrated superior performance, achieving R² values of 0.91 for biochar yield, 0.92 for bio-oil yield, and 0.82 for biogas yield on testing sets. To enhance model interpretability, SHapley Additive exPlanations (SHAP) and Partial Dependence Plots (PDPs) were utilized to assess feature importance and examine parameter influences on yield outcomes, offering valuable insights into process optimization and control. Volatile matter and fixed carbon were key predictors for biochar yield, while moisture content and pyrolysis temperature were significant for predicting bio-oil and biogas yields. This study highlights the potential of explainable AI models in advancing sustainable and efficient bio-product recovery from waste materials. © 2025 Elsevier B.V.Item Microwave assisted catalytic co-pyrolysis of banana peels and polypropylene: experimentation and machine learning optimization(Royal Society of Chemistry, 2025) Rajpurohit, N.S.; Sinha, S.; Ramesh, R.; Sankar Rao, C.; Harshini, H.The growing accumulation of agricultural and plastic waste poses serious environmental challenges, necessitating sustainable and efficient valorization strategies. This study investigates the microwave-assisted catalytic co-pyrolysis of banana peels and polypropylene, using graphite as a susceptor and potassium hydroxide as a catalyst. Experiments were conducted by varying biomass and plastic quantities and microwave power levels to study their effects on product yields and thermal performance. The process effectively converted waste materials into valuable products, with oil yield increasing with microwave power and optimized biomass-to-plastic ratios. The rate of mass loss and heating rate were found to significantly influence overall conversion efficiency. A support vector regression (SVR) model was developed to predict yields based on input parameters, achieving a coefficient of determination ranging from 0.81 to 0.99, which demonstrates the reliability of machine learning in capturing complex thermochemical behavior. 3D plots illustrated the nonlinear effects of process variables on yields. Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) analyses of char confirmed functional groups and crystalline phases, suggesting its suitability for applications like adsorbents or catalysts. Brunauer-Emmett-Teller (BET) analysis showed multilayer adsorption, while thermogravimetric analysis (TGA) highlighted distinct thermal degradation patterns of the feedstocks. These results affirm the promise of integrating experiments with ML for efficient waste-to-energy conversion. © 2025 The Royal Society of Chemistry.Item Predicting synergistic effects on biofuel production from microalgae (Spirulina)/Tire Co-pyrolysis using ensemble machine learning(Elsevier B.V., 2025) Sridevi, V.; Al-Asadi, M.; Adnan Abdullah, T.; Nhat, T.; Sankar Rao, C.; Talib Hamzah, H.; Le, P.-C.This study investigates the synergistic effects of microwave-assisted catalytic co-pyrolysis (MACCP) of microalgae and waste tires (WT) under varying parameters such as catalyst weight, microwave power, and susceptor quantity. Optimal reaction conditions yielded a high-quality bio-oil with a maximum yield of 50.46 wt% with low water content, significantly reducing microwave energy consumption from 810 to 540 kJ. The co-pyrolysis of WT and microalgae enhanced denitrogenation and deoxygenation, improving the quality of the resulting bio-oil. Gas chromatography-mass spectrometry (GC-MS) analysis of bio-oil identified an increase in the complex composition of mono- and polyaromatic hydrocarbons and a decrease in oxygenated compounds. An ensemble machine learning approach has been employed to model and predict outcomes, achieving R2 values between 0.7 and 0.98. The models with the best predicted accuracy were Extreme Gradient Boosting (XGB) and Extra Trees (ET), both of which achieved an R2 of 0.98. The models were rigorously validated using the Leave-One-Out Cross-Validation technique, ensuring robust predictions with minimal bias by training on all but one observation iteratively and testing on the excluded data point. The work highlights the possible use of co-pyrolyzing microalgae and WT for sustainable, high-quality bio-oil production with lower energy consumption. It shows that machine learning can optimize MACCP procedures. © 2025 The Energy Institute