Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
Search Results
Item The direct conversion of benzene to phenol by hydroxylation with hydrogen peroxide was carried out over various transition metals impregnated on MCM-41 and activated carbon. Copper-, iron-, and vanadium-impregnated on activated carbon gave better yields of phenol when compared to the corresponding reactions using cobalt-, nickel-, manganese-, and titanium-impregnated catalysts. Comparison of the MCM-41 and activated carbon-supported catalysts showed that activated carbon-supported catalysts gave a higher yield of phenol than did the MCM-41-supported catalysts. The activity of the transition metals supported on activated carbon in the production of phenol was V > Fe > Cu; the corresponding activity of the transition metals supported on MCM-41 was Cu > Fe > V. In addition to the role of transition metals in catalyzing the hydroxylation reaction, the hydrophobic nature of the activated carbon surface seems to enhance the performance of these catalysts relative to the MCM-41-supported catalysts.(Benzene hydroxylation to phenol catalyzed by transition metals supported on MCM-41 and activated carbon) Choi, J.-S.; Kim, T.-H.; Saidutta, M.B.; Sung, J.-S.; Kim, K.-I.; Jasra, R.V.; Song, S.-D.; Rhee, Y.-W.2004Item The direct conversion of benzene to phenol by hydroxylation with hydrogen peroxide was carried out over catalyst containing various transition metals impregnated on activated carbon. Iron and vanadium impregnated catalysts gave better yields of phenol compared to copper impregnated catalysts. The activity of transition metals supported on activated carbon catalyst in the production of phenol was V > Fe > Cu. In addition to the role of transition metals in catalyzing the hydroxylation reaction, the hydrophobic nature of the activated carbon surface and also the surface acidity and basicity seems to have enhanced the performance of these catalysts. © 2005 Springer Science + Business Media, Inc.(Transition metals supported on activated carbon as benzene hydroxylation catalysts) Choi, J.-S.; Kim, T.-H.; Choo, K.-Y.; Sung, J.-S.; Saidutta, M.B.; Song, S.-D.; Rhee, Y.-W.2005Item The direct conversion of benzene to phenol by hydroxylation with hydrogen peroxide was carried out over catalysts containing iron impregnated on activated carbon. Iron was impregnated on various surface modified activated carbons. The catalyst that was made by treating activated carbon with nitric acid, that was treated thermally in the presence of nitrogen at 600 °C and impregnated with 5 wt.% iron, gave a phenol yield of 20%. It was found that the synergistic interactions of surface groups and the impregnated iron have enhanced the performance of these catalysts. © 2005 Elsevier B.V. All rights reserved.(Direct synthesis of phenol from benzene on iron-impregnated activated carbon catalysts) Choi, J.-S.; Kim, T.-H.; Choo, K.-Y.; Sung, J.-S.; Saidutta, M.B.; Ryu, S.-O.; Song, S.-D.; Badekai Ramachandra, B.; Rhee, Y.-W.2005Item Shear stress effects on production of exopolymeric substances and biofilm characteristics during phenol biodegradation by immobilized Pseudomonas desmolyticum (NCIM2112) cells in a pulsed plate bioreactor(Taylor and Francis Inc. 325 Chestnut St, Suite 800 Philadelphia PA 19106, 2016) Veena, B.R.; Shetty K, K.V.; Saidutta, M.B.This article reports studies on a continuous pulsed plate bioreactor (PPBR) with the cells of Pseudomonas desmolyticum (NCIM2112) immobilized on granular activated carbon (GAC) used as a biofilm reactor for biodegradation of phenol. Almost complete removal of 200 ppm phenol could be achieved in this bioreactor. Biofilm structure and characteristics are influenced by hydrodynamic and shear conditions in bioreactors. In this article, the effect of shear stress induced by frequency of pulsation on biofilm characteristics during the startup period in the PPBR is reported. The startup time decreased with the increase in frequency of pulsation. The formation of biofilm in PPBR was found to have three phases: accumulation, compaction, and plateau. The effect of frequency on production of exoploymeric substances (EPS) such as, protein, carbohydrate, and humic substance is reported. An increase in shear stress induced by the frequency of pulsation increased the production of exopolymeric substances in the biofilm during startup of the bioreactor. Increase in shear stress caused a decrease in biofilm thickness and an increase in dry density of the biofilm. Increase in shear stress resulted in a smoother and thinner biofilm surface with more compact and dense structure. © 2016, Copyright © Taylor & Francis Group, LLC.