Faculty Publications

Now showing 1 - 3 of 3

Structure-sensitive electrocatalytic reduction of co2 to methanol over carbon-supported intermetallic ptzn nano-alloys
(American Chemical Society service@acs.org, 2020) Payra, S.; Shenoy, S.; Chakraborty, C.; Tarafder, K.; Roy, S.
The electrochemical reduction of CO2 (CO2RR) to produce valuable synthetic fuel like CH3OH not only mitigates the accumulated greenhouse gas from the environment but is also a promising direction toward attenuating our continuous reliance on fossil fuels. However, CO2RR to yield CH3OH suffers because of large overpotential, competitive H2 evolution reaction (HER), and poor product selectivity. In this regard, intermetallic alloy catalysts open up a wide possibility of fine-tuning the electronic property and attain appropriate structures that facilitate selective CO2RR. Here, we report for the first time the CO2RR over carbon-supported PtZn nano-alloys and probed the crucial role of structures and interfaces as active sites. PtZn/C, Pt3Zn/C, and PtxZn/C (1 < x < 3) synthesized from the metal-organic framework material were characterized structurally and morphologically. The catalysts demonstrated structure dependency toward CH3OH selectivity, as the mixed-phase PtxZn/C outperformed the phase-pure PtZn/C and Pt3Zn/C. The structure-dependent reaction mechanism and the kinetics were elucidated over the synthesized catalysts with the help of detail experiments and associated density functional theory calculations. Results showed that in spite of low electrochemically active surface area, PtxZn could not only have facilitated the single electron transfer to adsorbed CO2 but also showed better binding of the intermediate CO2 •- over its surface. Moreover, the lower bond energy between the mixed-phase surface and -OCH3 compared to the phase-pure catalysts has enabled higher CH3OH selectivity over PtxZn. This work opens a wide possibility of studying the role of interfaces between phase-pure nano-alloys toward CO2RR. © 2020 American Chemical Society
Photo- and Electrocatalytic Reduction of CO2 over Metal-Organic Frameworks and Their Derived Oxides: A Correlation of the Reaction Mechanism with the Electronic Structure
(American Chemical Society, 2022) Payra, S.; Ray, S.; Sharma, R.; Tarafder, K.; Mohanty, P.; Roy, S.
A Ce/Ti-based bimetallic 2-aminoterephthalate metal-organic framework (MOF) was synthesized and evaluated for photocatalytic reduction of CO2 in comparison with an isoreticular pristine monometallic Ce-terephthalate MOF. Owing to highly selective CO2 adsorption capability, optimized band gaps, higher flux of photogenerated electron-hole pairs, and a lower rate of recombination, this material exhibited better photocatalytic reduction of CO2 and lower hydrogen evolution compared to Ce-terephthalate. Thorough probing of the surface and electronic structure inferred that the reducibility of Ce4+ to Ce3+ was due to the introduction of an amine functional group into the linker, and low-lying Ti(3d) orbitals in Ce/Ti-2-aminoterephthalate facilitated the photoreduction reaction. Both the MOFs were calcined to their respective oxides of Ce1-xTixO2 and CeO2, and the electrocatalytic reduction of CO2 was performed over the oxidic materials. In contrast to the photocatalytic reaction mechanism, the lattice substitution of Ti in the CeO2 fluorite cubic structure showed a better hydrogen evolution reaction and consequently, poorer electroreduction of CO2 compared to pristine CeO2. Density functional theory calculations of the competitive hydrogen evolution reaction on the MOF and the oxide surfaces corroborated the experimental findings. © 2022 American Chemical Society.
Mechanistic insight and first principle analysis of cation-inverted zinc ferrite nanostructure: A paradigm for ppb-level room temperature NOx sensor
(Elsevier B.V., 2024) Nath, V.G.; Ray, S.; Rodney, J.D.; Prakasha Bharath, S.; Roy, S.; Tarafder, K.; Subramanian, A.; Chul Kim, B.
Herein, we adopted a new paradigm for developing a high-performance gas sensor by leveraging the mixed spinel ZnFe2O4 structure (mZFO) to enhance the adsorption of NOx molecules. Material characterization reveals the formation of the mZFO due to the cation inversion in lattice sites. The estimated value of the inversion degree is observed to shift from 0.78 to 0.39 with an increase in the calcination temperature. The mZFO nanoparticles calcined at 500 °C show exceptional sensing performance due to their suitable grain size (∼2 times Debye length), neck diameter, and surface area. The sensing studies conducted at various NOx concentrations indicate that the sensor can detect ppb level of NOx with a detection limit of about 9 ppb at room temperature. The detailed sensing mechanism is elucidated based on the density functional theory calculations (DFT) and Bader charge analysis. The outstanding sensor performance is attributed to the formation of a mixed spinel structure, wherein the adsorption energy of NOx (∼-0.6 eV) in the presence of surface adsorbed oxygen is higher than that of the normal spinel structure (∼-0.1 eV). Furthermore, the sensor exhibited a fast response and recovery times (7 and 92 s at 800 ppb NO2), excellent stability, and selectivity. The practical suitability of the mZFO sensor was studied by analyzing the vehicle exhaust emissions. We strongly believe this work would pave a novel approach to developing a high-potential gas sensor by modifying the cation distributions in the spinel ferrites. © 2024 Elsevier B.V.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results