Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
Search Results
Item Methanol selective oxidation to formaldehyde over a modified Fe-Mo catalyst with two different stoichiometric (Mo/Fe atomic ratio = 1.5 and 3.0) was studied experimentally in a fixed bed reactor over a wide range of reaction conditions. The physicochemical characterization of the prepared catalysts provides evidence that Fe2(MoO4)3 is in fact the active phase of the catalyst. The experimental results of conversion of methanol and selectivity towards formaldehyde for various residence times were studied. The results showed that as the residence time increases the yield of formaldehyde decreases. Selectivity of formaldehyde decreases with increase in residence time. This result is attributable to subsequent oxidation of formaldehyde to carbon monoxide due to longer residence time.(Selective oxidation of methanol to formaldehyde using modified iron-molybdate catalysts) Kim, T.-H.; Badekai Ramachandra, B.; Choi, J.-S.; Saidutta, M.B.; Choo, K.-Y.; Song, S.-D.; Rhee, Y.-W.2004Item The direct conversion of benzene to phenol by hydroxylation with hydrogen peroxide was carried out over catalyst containing various transition metals impregnated on activated carbon. Iron and vanadium impregnated catalysts gave better yields of phenol compared to copper impregnated catalysts. The activity of transition metals supported on activated carbon catalyst in the production of phenol was V > Fe > Cu. In addition to the role of transition metals in catalyzing the hydroxylation reaction, the hydrophobic nature of the activated carbon surface and also the surface acidity and basicity seems to have enhanced the performance of these catalysts. © 2005 Springer Science + Business Media, Inc.(Transition metals supported on activated carbon as benzene hydroxylation catalysts) Choi, J.-S.; Kim, T.-H.; Choo, K.-Y.; Sung, J.-S.; Saidutta, M.B.; Song, S.-D.; Rhee, Y.-W.2005Item The direct conversion of benzene to phenol by hydroxylation with hydrogen peroxide was carried out over catalysts containing iron impregnated on activated carbon. Iron was impregnated on various surface modified activated carbons. The catalyst that was made by treating activated carbon with nitric acid, that was treated thermally in the presence of nitrogen at 600 °C and impregnated with 5 wt.% iron, gave a phenol yield of 20%. It was found that the synergistic interactions of surface groups and the impregnated iron have enhanced the performance of these catalysts. © 2005 Elsevier B.V. All rights reserved.(Direct synthesis of phenol from benzene on iron-impregnated activated carbon catalysts) Choi, J.-S.; Kim, T.-H.; Choo, K.-Y.; Sung, J.-S.; Saidutta, M.B.; Ryu, S.-O.; Song, S.-D.; Badekai Ramachandra, B.; Rhee, Y.-W.2005