Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item 6 CTA 8.3 G1-1 Cummins engine performance & exhaust emission tests using methyl ester Mahua oil and diesel fuel blends(2008) Godiganur, S.; Reddy, R.P.; Murthy, C.H.S.A Cummins 6 CTA 8.3G1-1 turbocharged DI diesel engine was fueled with blends of esters of Mahua oil and the performance and emissions were compared with diesel. The neat biodiesel, 10%, 20%, 40%, 60%, 80%, and base fuel were tested at constant load (28% of rated load) and at constant speed of 1500 rpm. This experiment is conducted on D.G Set, used to supply power to mining equipments in MSPL Iron Ore Company Hospet. Dist. Bellary. The objective of this study was to evaluate the impact of various blends of biodiesel on engine performance and emissions. Neat Mahua oil poses some problems when subjected to prolonged usage in CI engine. These problems can be reduced to minimum by subjecting the Mahua oil to the process of transesterification. Various properties of the biodiesel thus developed are evaluated and compared in relation to that of conventional diesel oil. Copyright © Enviromedia.Item 6BTA 5.9 G2-1 Cummins engine performance and emission tests using methyl ester mahua (Madhuca indica) oil/diesel blends(2009) Godiganur, S.; Suryanarayana Murthy, C.H.; Reddy, R.P.Neat mahua oil poses some problems when subjected to prolonged usage in CI engine. The transesterification of mahua oil can reduce these problems. The use of biodiesel fuel as substitute for conventional petroleum fuel in heavy-duty diesel engine is receiving an increasing amount of attention. This interest is based on the properties of bio-diesel including the fact that it is produced from a renewable resource, its biodegradability and potential to exhaust emissions. A Cummins 6BTA 5.9 G2- 1, 158 HP rated power, turbocharged, DI, water cooled diesel engine was run on diesel, methyl ester of mahua oil and its blends at constant speed of 1500 rpm under variable load conditions. The volumetric blending ratios of biodiesel with conventional diesel fuel were set at 0, 20, 40, 60, and 100. Engine performance (brake specific fuel consumption, brake specific energy consumption, thermal efficiency and exhaust gas temperature) and emissions (CO, HC and NOx) were measured to evaluate and compute the behavior of the diesel engine running on biodiesel. The results indicate that with the increase of biodiesel in the blends CO, HC reduces significantly, fuel consumption and NOx emission of biodiesel increases slightly compared with diesel. Brake specific energy consumption decreases and thermal efficiency of engine slightly increases when operating on 20% biodiesel than that operating on diesel. © 2008 Elsevier Ltd. All rights reserved.Item Performance and emission characteristics of a Kirloskar HA394 diesel engine operated on fish oil methyl esters(2010) Godiganur, S.; Suryanarayana Murthy, Ch.; Reddy, R.P.The high viscosity of fish oil leads to problem in pumping and spray characteristics. The inefficient mixing of fish oil with air leads to incomplete combustion. The best way to use fish oil as fuel in compression ignition (CI) engines is to convert it into biodiesel. It can be used in CI engines with very little or no engine modifications. This is because it has properties similar to mineral diesel. Combustion tests for methyl ester of fish oil and its blends with diesel fuel were performed in a kirloskar H394 DI diesel engine, to evaluate fish biodiesel as an alternative fuel for diesel engine, at constant speed of 1500 rpm under variable load conditions. The tests showed no major deviations in diesel engine's combustion as well as no significant changes in the engine performance and reduction of main noxious emissions with the exception on NOx. Overall fish biodiesel showed good combustion properties and environmental benefits. © 2009 Elsevier Ltd. All rights reserved.Item Performance and emission characteristics of double cylinder CI engine operated with cardanol bio fuel blends(2012) Mallikappa, D.N.; Reddy, R.P.; Murthy, C.S.N.India imports more than seventy percent of the oil it uses and is looking for alternative fuel to reduce its dependence on imports. In India, bio fuels derived from non-edible oils is considered as a renewable alternative to the fossil diesel. The cost of the biodiesel is higher than diesel and hence in this work, cardanol was used as an alternative renewable fuel for the diesel engine. The engine tests were conducted on a double cylinder, direct injection, compression ignition engine. From the engine tests, it is observed that the brake power increases (by 70% approximately) as load increases. Brake specific energy conversion decreases (by 25-30% approximately) with increase in brake power. Brake thermal efficiency increases with higher brake power and emission levels (HC, CO, NOX) were nominal up to 20% blends. © 2011 Elsevier Ltd.