Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Flexural fatigue analysis of steel fibre reinforced concrete(2012) Girish, M.G.; Chandrashekar, A.; Ravi Shankar, A.U.This paper presents the experimental investigation carried on Steel Fiber Reinforced Concrete (SFRC) subjected to repeated loading. The SFRC beam specimen of size 500mm × 100mm × 100mm containing mixed steel fibers of size 50mm × 2mm × 0.6mm and 0.5mm?× 30mm in different proportions were tested under two point flexural fatigue load at a frequency of 2Hz at various stress levels. The readings obtained from the flexural fatigue test were used to plot S-N diagram and also to perform statistical analysis using two parameter Weibull distributions. © 2012 CAFET-INNOVA TECHNICAL SOCIETY.Item Laboratory investigation on cement-treated recycled concrete aggregate bases for flexible pavements(Elsevier Ltd, 2023) Chiranjeevi, K.; Hemanth Kumar, D.; Yathish, R.G.; Ravi Shankar, A.U.India's economy is progressing fast, and many infrastructure development programs are going on. Especially the road network expansion is going on many folds. As a result, natural coarse aggregates are getting depleted, which has an impact on environmental sustainability. Utilizing the resources from the many aged and demolished structures will be cost-effective and solve the disposal problem of these wastes. India's government insists on using marginal material, demolished waste, or recycled aggregates as alternative materials for road construction. New codes developed by IRC and MoRTH recommend Cement Treated Bases (CTB) and Cement Treated Sub-Bases for pavement lower layers. In light of this, the present study attempts to utilize Recycled Concrete Aggregates (RCA) obtained from construction and demolition (C&D) waste in the CTB. The efficiency of RCA was checked at various replacement levels ranging from 0% to 100% with cement stabilization of 3%, 5%, and 7%. The strength properties like Unconfined Compressive Strength (UCS), Flexural Strength and durability were evaluated. The microstructural characteristics and elemental analysis of the cement treated recycled concrete aggregate mixtures were examined. The research yielded the highest potential RCA of up to 50% with a cement content of 5%, meeting the Indian Road Congress (IRC) criteria for CTB. © 2023Item Optimizing Ball Milling for High-Quality Recycled Aggregates: Examining the Mechanical Processing and Performance of Cement-Treated Bases(American Society of Civil Engineers (ASCE), 2025) Chiranjeevi, K.; Ramagiri Girish, Y.; Hemanth Kumar, D.; Mulangi, R.H.; Ravi Shankar, A.U.Producing superior-quality recycled aggregates from demolition waste is challenging. Over the years, mec hanical treatment methods for removing attached mortar from aggregates have evolved significantly. The studies on effective recycled coarse aggregate (RCA) processing with optimized processing parameters using ball milling and characterization of processed RCA (RCA) are limited. In this study, central composite design in the response surface method was employed to optimize control process factors (charge, revolution time, and aggregate weight) with aggregate properties as responses (percentage mortar removal, water absorption WA, specific gravity Sg, impact value IV, and abrasion value AV). The aggregate processed with optimized processing parameters exhibited superior quality with enhanced physical properties. The effect of the processing of RCA on the mechanical properties of cement-treated bases was studied by utilizing processed RCA in cement-treated recycled concrete aggregate mixes. The microstructural analysis was performed using 3D-surface topography, scanning electron microscopy, and energy dispersive spectroscopy. The test results demonstrated a 63% reduction in water absorption and an improvement in Sg, IV, and AV by 12.3%, 38%, and 23.7%, respectively. It is also found that the unconfined compressive strength and flexural strength with processed RCA are improved by 31.5% and 45.7%, respectively. Natural coarse aggregate can be completely replaced with processed RCA in cement-treated bases with the optimized processing method. © 2025 American Society of Civil Engineers.