Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Effect of aggregate gradations on properties of porous friction course mixes(2010) Suresha, S.N.; George, V.; Ravi Shankar, A.U.This paper presents the study on effect of aggregate gradation on the mix design and performance properties of porous friction course (PFC) mixes. Six aggregate gradations were tested with due consideration to gradations specified for PFC or similar mixes by different agencies around the world. The PFC mixes were characterized for volumetric properties, permeability, unaged and aged abrasion loss, moisture susceptibility, and rutting resistance. The results were statistically analysed to identify the factors that significantly influence the properties of PFC mixes. Findings of the study clearly indicate that the gradations specified by various agencies will have significant effect on the design properties of PFC mixes, thus they are different. It also, helps in framing the Master aggregate gradation band for PFC mixes. Generally, permeability property is considered to be an optional parameter in the design. However, the findings of the present study recommended considering the permeability as one of the prime parameters in the design of PFC mixes. © RILEM 2009.Item Comparison of Stone Matrix Asphalt mixtures with polymer-modified bitumen and shredded waste plastics(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2016) Goutham, G.; Lekha, B.M.; Krishna, G.; Ravi Shankar, A.U.Stone Matrix Asphalt (SMA) is a gap-graded bituminous mixture characterised with its improved rut resistance and durability. It has comparatively higher proportion of coarse aggregates and binder mastic with bituminous binder and mineral filler. Drain down of mastic content at various stages of construction is a common issue with SMA, and generally, some fibre additives are used to stabilise the mixture or a modified bitumen is used as the binder material. In this study, shredded waste plastics (SWP) are used instead of other stabilising additives, to prepare SMA mixtures with conventional viscosity graded (VG) 30 bitumen. Mixtures were prepared with four different levels of SWP content, and another mixture without any stabilisers was also prepared using polymer-modified bitumen (PMB). Specimens were prepared in superpave gyratory compactor (SGC) for all mixtures at different bitumen contents to determine volumetric and Marshall properties, and optimum bitumen content (OBC) was calculated for each mixture. Tensile strength, moisture susceptibility, rutting resistance and fatigue behaviour were also determined for all mixtures at corresponding OBC. From the available results, the optimum level of SWP in SMA mixture was determined as 8% by weight of bitumen. The study showed that even though mixture with PMB performed the best, SMA with 8% SWP provided comparable results. Based on the present investigation, waste plastic in suitable dosage can be recommended in SMA, instead of a stabilising additive. © 2015 Informa UK Limited, trading as Taylor & Francis Group.