Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
10 results
Search Results
Item Kinetic and thermodynamic studies on the adsorption of heavy metals from aqueous solution by melanin nanopigment obtained from marine source: Pseudomonas stutzeri(Academic Press, 2018) Manirethan, V.; Raval, K.; Rajan, R.; Thaira, H.; Mohan Balakrishnan, R.M.The difficulty in removal of heavy metals at concentrations below 10 mg/L has led to the exploration of efficient adsorbents for removal of heavy metals. The adsorption capacity of biosynthesized melanin for Mercury (Hg(II)), Chromium (Cr(VI)), Lead (Pb(II)) and Copper (Cu(II)) was investigated at different operating conditions like pH, time, initial concentration and temperature. The heavy metals adsorption process was well illustrated by the Lagergren's pseudo-second-order kinetic model and the equilibrium data fitted excellently to Langmuir isotherm. Maximum adsorption capacity obtained from Langmuir isotherm for Hg(II) was 82.4 mg/g, Cr(VI) was 126.9 mg/g, Pb(II) was 147.5 mg/g and Cu(II) was 167.8 mg/g. The thermodynamic parameters revealed that the adsorption of heavy metals on melanin is favorable, spontaneous and endothermic in nature. Binding of heavy metals on melanin surface was proved by Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray Photoelectron Spectroscopy (XPS). Contemplating the results, biosynthesized melanin can be a potential adsorbent for efficient removal of Hg(II), Cr(VI), Pb(II) and Cu(II) ions from aqueous solution. © 2018 Elsevier LtdItem Expression of Bacillus licheniformis chitin deacetylase in E. coli pLysS: Sustainable production, purification and characterisation(Elsevier B.V., 2019) Bhat, P.; Pawaskar, G.-M.; Raval, R.; Cord-Landwehr, S.; Moerschbacher, B.; Raval, K.Chitosan obtained by enzymatic deacetylation of chitin using chitin deacetylase (CDA) holds promise primarily due to the possibility to yield chitosan with non-random patterns of acetylation and more environmentally friendly process compared to chemical deacetylation. In the present study, a sustainable bioprocess is reported for over-expression of a bacterial CDA in E. coli pLysS cells. A Bacillus licheniformis CDA gene is identified in the genome of the bacterium, cloned, and expressed, yielding enzymatically active recombinant protein. For enzyme production, a growth medium is formulated using carbon and nitrogen sources, which do not compete with the human food chain. The maximum enzyme activity of 320 ± 20 U/mL is achieved under optimized conditions. The CDA productivity is improved by about 23 times in shake flask culture by optimizing operating conditions and medium components. The CDA is purified and the enzyme kinetic values i.e. Km, Vmax and Kcat are reported. Also the effect of cofactors, temperature, and pH on the enzyme activity is reported. Further, economic yield is proposed for production of CDA through this bioprocess. © 2019 Elsevier B.V.Item Adsorptive removal of trivalent and pentavalent arsenic from aqueous solutions using iron and copper impregnated melanin extracted from the marine bacterium Pseudomonas stutzeri(Elsevier Ltd, 2020) Manirethan, V.; Raval, K.; Mohan Balakrishnan, R.M.The metalloid arsenic is one of the most conspicuous groundwater contaminants in the Indian subcontinent and its removal from aqueous medium is the main focus of this study. The study aims at functionalising melanin using iron and copper for the efficient removal of arsenic and rendering water fit for consumption. Melanin obtained from the marine bacteria Pseudomonas stutzeri was functionalised by iron impregnation (Fe-melanin) and copper impregnation (Cu-melanin). Morphological studies using FESEM portrayed the impregnated iron and copper granules on the surface of melanin, while XRD analysis confirmed the presence of Fe2O3 and CuO on melanin. Adsorption studies on As (V) and As (III) were conducted using Fe-melanin and Cu-melanin for different operating variables like pH, temperature and contact time. More than 99% per cent of As (III) and As (V) from water was removed at a pH range between 4 and 6 within 50 min in the case of Fe-melanin and 80 min for Cu-melanin. Adsorption equilibrium studies showed better fit with Langmuir adsorption isotherm and had good agreement with Redlich-Peterson's three-parameter model. The maximum adsorption capacities of Fe-melanin and Cu-melanin obtained from Langmuir adsorption model are 50.12 and 20.39 mg/g, respectively, for As (V) and similarly 39.98 and 19.52 mg/g, respectively, for As (III). Arsenic-binding to the functionalised melanin was confirmed using FT-IR and the XPS analysis. Reuse of the adsorbent was effectively done by desorbing the iron and copper together with the bound As (III) and As (V) and further re-impregnation of iron and copper in melanin. Re-functionalised melanin showed 99% adsorption efficiency up to four cycles of adsorption/desorption. A novel iron and copper impregnated melanin was synthesized to remove As (III) and As (V) from groundwater and the adsorption process was optimized. © 2019 Elsevier LtdItem Batch and continuous studies on the removal of heavy metals from aqueous solution using biosynthesised melanin-coated PVDF membranes(Springer, 2020) Manirethan, V.; Gupta, N.; Mohan Balakrishnan, R.M.; Raval, K.Heavy metals like mercury, chromium, lead and copper present in groundwater at lower concentrations cause severe health issues and can even be fatal when consumed. The biopigment/biopolymer melanin can be reaped from different sources like bacterium, fungus, and human hair. It has excellent heavy metal ion scavenging property and can be exploited for non-biological applications, substantially including water purification. In this work, melanin nanoparticles were derived from the marine bacterium Pseudomonas stutzeri and were coated onto hydrophobic polyvinylidene fluoride (PVDF) membrane as a support, for batch and continuous removal of heavy metal studies. Batch studies on the effect of pH, temperature and adsorbate dose and continuous adsorption studies on the effect of flow rate, adsorbate and adsorbent mass loadings were carried out by using biosynthesised melanin-coated PVDF membranes for the removal of Hg(II), Cr(VI), Pb(II) and Cu(II). Scanning electron microscope (SEM) images revealed the surface morphology, Fourier-transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDS) deciphered the chemical characteristics of melanin-coated PVDF membranes before and after adsorption. Contact angle measurement confirmed the improvement in hydrophilicity of PVDF membrane upon coating with melanin. The maximum removal percentages of heavy metals achieved by melanin-coated PVDF membranes under batch mode operation were 87.6%, 88.45%, 91.8% and 95.8% for mercury, chromium, lead and copper, respectively optimised at 318 K and pH of 3 for chromium and 5 for other metals. However, the continuous mode of operation with a flow rate of 0.5 mL/min having 1 mg/L of heavy metal solution concentration exposed to 50 mg of melanin loading with a working volume of 200 mL showed better removal efficiencies compared with batch mode. The dynamic studies using Thomas and Yoon–Nelson models described the transient stage of the breakthrough curve and the model constants were calculated for column design and scale-up. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.Item Tailoring solulan C24 based niosomes for transdermal delivery of donepezil: In vitro characterization, evaluation of pH sensitivity, and microneedle-assisted Ex vivo permeation studies(Editions de Sante editions.de.sante@wanadoo.fr, 2020) Nayak, A.S.; Chodisetti, S.; Gadag, S.; Nayak, U.Y.; Srinikethan, S.; Raval, K.The present investigation aims at encapsulating donepezil (DNP) in a niosomes to avert the side effects and to deliver the intact carrier across the skin barrier by modulating its physicochemical properties. The finding conclusively demonstrated that entrapment efficiency and the alteration in the niosome size are associated with the change in the span 60: cholesterol ratio, sonication, and hydration volume. The addition of 5 mM of solulan C24 to the optimized formulation (NSV5SolC24) formed stable niosomes with a mean particle size of 180.1 ± 1.83 nm and entrapment efficiency of 82.15% ± 1.54%. The cryo-SEM image and in vitro drug release profile revealed that the NSV5SolC24 is pH-sensitive. FTIR spectral analysis of NSV5SolC24 suggested that the ether and ester group in the NSV5SolC24 complex undergoes SN2 cleavage and hydrolysis at lower pH, thus enhancing DNP release. The microneedle (MN)-assisted studies with MN1200 showed a 29-fold increase in transdermal permeation of intact NSV5SolC24 against the passive method in porcine skin. The intact NSV5SolC24 carrying DNP was translocated across the skin barrier successfully at a steady flux rate of 9.89 ± 0.923 ?g/cm2/h. Nevertheless, further in vivo studies are recommended to elucidate the pH sensitivity and clinical efficacy of the prepared drug delivery system. © 2020 Elsevier B.V.Item Engineering a recombinant chitinase from the marine bacterium Bacillus aryabhattai with targeted activity on insoluble crystalline chitin for chitin oligomer production(Elsevier B.V., 2024) Subramani, A.K.; Ramachandra, R.; Thote, S.; Govindaraj, V.; Vanzara, P.; Raval, R.; Raval, K.Chitin, an abundant polysaccharide in India, is primary by-product of the seafood industry. Efficiently converting chitin into valuable products is crucial. Chitinase, transforms chitin into chitin oligomers, holds significant industrial potential. However, the crystalline and insoluble nature of chitin makes the conversion process challenging. In this study, a recombinant chitinase from marine bacteria Bacillus aryabhattai was developed. This enzyme exhibits activity against insoluble chitin substrates, chitin powder and flakes. The chitinase gene was cloned into the pET 23a plasmid and transformed into E. coli Rosetta pLysS. IPTG induction was employed to express chitinase, and purification using Ni-NTA affinity chromatography. Optimal chitinase activity against colloidal chitin was observed in Tris buffer at pH 8, temperature 55°C, with the presence of 400 mM sodium chloride. Enzyme kinetics studies revealed a Vmax of 2000 μmole min−1 and a Km of 4.6 mg mL−1. The highest chitinase activity against insoluble chitin powder and flakes reached 875 U mg−1 and 625 U mg−1, respectively. The chitinase demonstrated inhibition of Candida albicans, Fusarium solani, and Penicillium chrysogenum growth. Thin Layer Chromatography (TLC) and LC-MS analysis confirmed the production of chitin oligomers, chitin trimer, tetramer, pentamer, and hexamer, from chitin powder and flakes using recombinant chitinase. © 2024 Elsevier B.V.Item Marine Bacillus haynesii chitinase: Purification, characterization and antifungal potential for sustainable chitin bioconversion(Elsevier Ltd, 2024) Govindaraj, V.; Kim, S.-K.; Raval, R.; Raval, K.The development of chitinase tailored for the bioconversion of chitin to chitin oligosaccharides has attracted significant attention due to its potential to alleviate environmental pollution associated with chemical conversion processes. In this present investigation, we purified extracellular chitinase derived from marine Bacillus haynesii to homogeneity and subsequently characterized it. The molecular weight of BhChi was approximately 35 kDa. BhChi displayed its peak catalytic activity at pH 6.0, with an optimal temperature of 37 °C. It exhibited stability across a pH range of 6.0–9.0. In addition, BhChi showed activation in the presence of Mn2+ with the improved activity of 105 U mL−1. Ca2+ and Fe2+ metal ions did not have any significant impact on enzyme activity. Under the optimized enzymatic conditions, there was a notable enhancement in catalytic activity on colloidal chitin with Km of 0.01 mg mL−1 and Vmax of 5.75 mmol min−1. Kcat and catalytic efficiency were measured at 1.91 s−1 and 191 mL mg−1 s−1, respectively. The product profiling of BhChi using thin layer chromatography and Mass spectrometric techniques hinted an exochitinase mode of action with chitobiose and N-Acetyl glucosamine as the products. This study represents the first report on an exochitinase from Bacillus haynesii. Furthermore, the chitinase showcased promising antifungal properties against key pathogens, Fusarium oxysporum and Penicillium chrysogenum, reinforcing its potential as a potent biocontrol agent. © 2024Item Marine chitinase AfChi: green defense management against Colletotrichum gloeosporioides and anthracnose(Springer Science and Business Media Deutschland GmbH, 2024) Rajesh, R.; Raval, K.; Raval, R.Anthracnose disease, caused by the Colletotrichum gloeosporioides species, affects vegetables, fruits, pulses, and cereals, leading to significant economic losses worldwide. Although many synthetic fungicides are used to control this pathogen, eco-friendly biological alternatives are gaining popularity. This study focuses on isolating and purifying chitinase (Af Chi)from a marine bacterium and testing its antifungal efficacy against C. gloeosporioides spore germination by targeting the chitin in the fungal cell wall. The chitinase was purified from a marine bacterium A. faecalis from the Arabian Sea and had a molecular mass of 45 kDa and a specific activity of 84.6 U/mg. Af Chi worked best at 50 °C and pH 7.0 in Tris HCl buffer. Na+ ion was the highest cofactor, highlighting the halophilic nature of this chitinase. K+, Ca2+, Cu2+, Mg2+, Mn2+, and EDTA also increased activity, while Fe3+, Zn2+, Co2+, and Pb2+ decreased it. The Km and Vmax values were 1.87 µg/mL and 17.45 U/mL, respectively. Purified Af Chi at 10 mg/mL completely inhibited spore germination within 8 h and reduced the size of the spores. © The Author(s) 2024.Item Process optimisation for improved chitinase production from marine isolate Bacillus haynesii and bioethanol production with Saccharomyces cerevisiae(Springer Nature, 2025) Govindaraj, V.; Anandan, D.K.; Kim, S.-K.; Raval, R.; Raval, K.In the quest for sustainable fuel sources, chitin-based biorefineries are gaining recognition as chitin is the second most abundant bioresource after cellulose. This approach not only provides an effective method for converting shell waste from seafood processing into valuable bioethanol but also helps in waste management. In this study, Bacillus haynesii, a marine isolate, was investigated and this is the first report on optimisation of process parameters for chitinase production from Bacillus haynesii. The One Factor at a Time (OFAT) method was used to optimize process parameters including inoculum age, inoculum size, temperature, pH, and filling volume, with colloidal chitin identified as the best carbon source for the growth of Bacillus haynesii. The Plackett-Burman Design (PBD) was employed to screen media components, followed by optimization using the Taguchi Orthogonal Array method. The media components investigated included glycerol, yeast extract, MnCl2·4H2O, MgSO4·7H2O, NH4Cl, and colloidal chitin. As a result, the optimized media—comprising 7.5 g/L yeast extract, 7.5% (w/v) glycerol, 0.6% (w/v) colloidal chitin, 1.44 g/L MnCl2·4H2O, and 1.2 g/L MgSO4·7H2O—yielded an enzyme activity of 6.85 U/mL with a specific activity of 28.87 U/mg. Furthermore, ethanol production from chitin oligosaccharides by Saccharomyces cerevisiae was quantified using the potassium dichromate oxidation method, achieving a bioethanol concentration of 2.48% v/v from 33.18 g/L of chitin oligosaccharides. These results demonstrate the potential of Bacillus haynesii-derived chitin oligosaccharides as a promising substrate for bioethanol production. © The Author(s) 2025.Item Identification, purification and functional characterization of a thermostable marine chitinase for potential fungal control via chitin degradation mechanism(Elsevier Ltd, 2025) Atheena, P.V.; Raval, K.; Raval, R.The growing prevalence of treatment-resistant Candida species highlights an urgent need for innovative antifungal therapies. The current range of antifungals, limited to polyenes, azoles, and echinocandins, are becoming insufficient due to the rise of resistance, including cross-resistance among fungal strains. Marine environment is an underexplored reservoir of unique enzymes which can be extremophilic. This study presents the cloning and expression of a chitinase gene from the bacterium Bacillus thuringiensis (BtChi), expressed in an E. coli system, yielding a protein with a molecular weight of approximately 71 kDa. Disc diffusion and MIC experiments indicated that 5 ?g/mL chitinase efficiently suppressed the growth of Candida albicans. Initial characterization identified the optimal activity at 40 °C and pH 7.0. The enzyme retained over 75 % activity across a pH range of 4–8 and a temperature range of 30–70 °C after 120 min. Activity was further enhanced by 24 % with 100 mM Na+. Kinetic parameters with colloidal chitin revealed Km and Vmax values to be 0.05 mg/mL and 1.37 U/mL respectively. This study holds the potential of developing a potent natural anti-fungal against the present day chemical counterparts. © 2025 The Authors