Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
14 results
Search Results
Item Expression studies of Bacillus licheniformis chitin deacetylase in E. coli Rosetta cells(Elsevier B.V., 2017) Raval, R.; Simsa, R.; Raval, K.Chitin, the biopolymer of the N-acetylglucosamine, is the most abundant biopolymer on the planet after cellulose. However owing to its crystalline nature, its deacetylated derivative; chitosan is industrially more potent. This conversion on an enzymatic scale can be made using chitin deacetylase. The metagenomics library constructed from the soil exposed to chitin and chitosan yielded chitin modifying enzymes, one of them being chitin deacetylase (CDA) utilized for the present study. The gene was amplified and expressed using the pET 22b vector in E. coli Rosetta cells. The effect of two additives; chitin and glycerol on the CDA activity were studied. The inclusion of glycerol in the medium improved the biomass by 50% from the initial value of 1.25 g/l to 2.5 g/l. The activity of CDA increased from 90 ?mol/min/ml to 343 ?mol/min/ml. The CDA activity reported in the present paper is the highest observed for any strain. The addition of glycerol to the media not only helped improve the yield of the chitin deacetylase but also imparted value addition to the waste of the biofuel industry. © 2017 Elsevier B.V.Item Kinetic and thermodynamic studies on the adsorption of heavy metals from aqueous solution by melanin nanopigment obtained from marine source: Pseudomonas stutzeri(Academic Press, 2018) Manirethan, V.; Raval, K.; Rajan, R.; Thaira, H.; Mohan Balakrishnan, R.M.The difficulty in removal of heavy metals at concentrations below 10 mg/L has led to the exploration of efficient adsorbents for removal of heavy metals. The adsorption capacity of biosynthesized melanin for Mercury (Hg(II)), Chromium (Cr(VI)), Lead (Pb(II)) and Copper (Cu(II)) was investigated at different operating conditions like pH, time, initial concentration and temperature. The heavy metals adsorption process was well illustrated by the Lagergren's pseudo-second-order kinetic model and the equilibrium data fitted excellently to Langmuir isotherm. Maximum adsorption capacity obtained from Langmuir isotherm for Hg(II) was 82.4 mg/g, Cr(VI) was 126.9 mg/g, Pb(II) was 147.5 mg/g and Cu(II) was 167.8 mg/g. The thermodynamic parameters revealed that the adsorption of heavy metals on melanin is favorable, spontaneous and endothermic in nature. Binding of heavy metals on melanin surface was proved by Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray Photoelectron Spectroscopy (XPS). Contemplating the results, biosynthesized melanin can be a potential adsorbent for efficient removal of Hg(II), Cr(VI), Pb(II) and Cu(II) ions from aqueous solution. © 2018 Elsevier LtdItem Screening of chitin deacetylase producing microbes from marine source using a novel receptor on agar plate(Elsevier B.V., 2019) Pawaskar, G.-M.; Pangannaya, S.; Raval, K.; Trivedi, D.; Raval, R.Chitosan is a deacetylated form of naturally occurring polymer; chitin. On an industrial scale, the deacetylation of chitin to chitosan is performed using harsh chemicals like sodium hydroxide. This not only adds to the environmental pollution but the product is also random in terms of its deacetylation. This shortcoming can be addressed by using enzymes like chitin deacetylase (CDA). The screening of these organisms would require a reliable, fast and sensitive screening method. The deacetylation of chitin into chitosan, releases acetate as the byproduct of the reaction. A receptor which specifically binds to the acetate ion was synthesized chemically. The receptor upon binding with the acetate ion emitted a fluorescence which could be viewed using the gel documentation unit. The receptor was optimized for the screening of CDA producing microbes with the positive fungal control as Penicillium sp. and bacterial control as Bacillus megaterium. A parallel study with the 4-Nitroacetanilide, the reported screening indicator for CDA was performed. The results obtained with the receptor in the present study were concordant with the 4-Nitroacetanilide. Upon standardization, the protocol was extended for the screening of CDA producing microbes from the marine crustacean dumped soil and water samples. The CDA activity of these microbes was further confirmed using spectrophotometric MBTH assay. This is the first report using this receptor for the screening of CDA producers. The method is not only sensitive but also reproducible and can be extended for a high throughput screening of CDA producers. © 2019 Elsevier B.V.Item Expression of Bacillus licheniformis chitin deacetylase in E. coli pLysS: Sustainable production, purification and characterisation(Elsevier B.V., 2019) Bhat, P.; Pawaskar, G.-M.; Raval, R.; Cord-Landwehr, S.; Moerschbacher, B.; Raval, K.Chitosan obtained by enzymatic deacetylation of chitin using chitin deacetylase (CDA) holds promise primarily due to the possibility to yield chitosan with non-random patterns of acetylation and more environmentally friendly process compared to chemical deacetylation. In the present study, a sustainable bioprocess is reported for over-expression of a bacterial CDA in E. coli pLysS cells. A Bacillus licheniformis CDA gene is identified in the genome of the bacterium, cloned, and expressed, yielding enzymatically active recombinant protein. For enzyme production, a growth medium is formulated using carbon and nitrogen sources, which do not compete with the human food chain. The maximum enzyme activity of 320 ± 20 U/mL is achieved under optimized conditions. The CDA productivity is improved by about 23 times in shake flask culture by optimizing operating conditions and medium components. The CDA is purified and the enzyme kinetic values i.e. Km, Vmax and Kcat are reported. Also the effect of cofactors, temperature, and pH on the enzyme activity is reported. Further, economic yield is proposed for production of CDA through this bioprocess. © 2019 Elsevier B.V.Item Adsorptive removal of trivalent and pentavalent arsenic from aqueous solutions using iron and copper impregnated melanin extracted from the marine bacterium Pseudomonas stutzeri(Elsevier Ltd, 2020) Manirethan, V.; Raval, K.; Mohan Balakrishnan, R.M.The metalloid arsenic is one of the most conspicuous groundwater contaminants in the Indian subcontinent and its removal from aqueous medium is the main focus of this study. The study aims at functionalising melanin using iron and copper for the efficient removal of arsenic and rendering water fit for consumption. Melanin obtained from the marine bacteria Pseudomonas stutzeri was functionalised by iron impregnation (Fe-melanin) and copper impregnation (Cu-melanin). Morphological studies using FESEM portrayed the impregnated iron and copper granules on the surface of melanin, while XRD analysis confirmed the presence of Fe2O3 and CuO on melanin. Adsorption studies on As (V) and As (III) were conducted using Fe-melanin and Cu-melanin for different operating variables like pH, temperature and contact time. More than 99% per cent of As (III) and As (V) from water was removed at a pH range between 4 and 6 within 50 min in the case of Fe-melanin and 80 min for Cu-melanin. Adsorption equilibrium studies showed better fit with Langmuir adsorption isotherm and had good agreement with Redlich-Peterson's three-parameter model. The maximum adsorption capacities of Fe-melanin and Cu-melanin obtained from Langmuir adsorption model are 50.12 and 20.39 mg/g, respectively, for As (V) and similarly 39.98 and 19.52 mg/g, respectively, for As (III). Arsenic-binding to the functionalised melanin was confirmed using FT-IR and the XPS analysis. Reuse of the adsorbent was effectively done by desorbing the iron and copper together with the bound As (III) and As (V) and further re-impregnation of iron and copper in melanin. Re-functionalised melanin showed 99% adsorption efficiency up to four cycles of adsorption/desorption. A novel iron and copper impregnated melanin was synthesized to remove As (III) and As (V) from groundwater and the adsorption process was optimized. © 2019 Elsevier LtdItem Tailoring solulan C24 based niosomes for transdermal delivery of donepezil: In vitro characterization, evaluation of pH sensitivity, and microneedle-assisted Ex vivo permeation studies(Editions de Sante editions.de.sante@wanadoo.fr, 2020) Nayak, A.S.; Chodisetti, S.; Gadag, S.; Nayak, U.Y.; Srinikethan, S.; Raval, K.The present investigation aims at encapsulating donepezil (DNP) in a niosomes to avert the side effects and to deliver the intact carrier across the skin barrier by modulating its physicochemical properties. The finding conclusively demonstrated that entrapment efficiency and the alteration in the niosome size are associated with the change in the span 60: cholesterol ratio, sonication, and hydration volume. The addition of 5 mM of solulan C24 to the optimized formulation (NSV5SolC24) formed stable niosomes with a mean particle size of 180.1 ± 1.83 nm and entrapment efficiency of 82.15% ± 1.54%. The cryo-SEM image and in vitro drug release profile revealed that the NSV5SolC24 is pH-sensitive. FTIR spectral analysis of NSV5SolC24 suggested that the ether and ester group in the NSV5SolC24 complex undergoes SN2 cleavage and hydrolysis at lower pH, thus enhancing DNP release. The microneedle (MN)-assisted studies with MN1200 showed a 29-fold increase in transdermal permeation of intact NSV5SolC24 against the passive method in porcine skin. The intact NSV5SolC24 carrying DNP was translocated across the skin barrier successfully at a steady flux rate of 9.89 ± 0.923 ?g/cm2/h. Nevertheless, further in vivo studies are recommended to elucidate the pH sensitivity and clinical efficacy of the prepared drug delivery system. © 2020 Elsevier B.V.Item Cloning, expression, purification and characterization of chitin deacetylase extremozyme from halophilic Bacillus aryabhattai B8W22(Springer Science and Business Media Deutschland GmbH, 2021) Pawaskar, G.M.; Raval, K.; Rohit, P.; Shenoy, R.P.; Raval, R.Chitin deacetylase (CDA) (EC 3.5.1.41) is a hydrolytic enzyme that belongs to carbohydrate esterase family 4 as per the CAZY database. The CDA enzyme deacetylates chitin into chitosan. As the marine ecosystem is a rich source of chitin, it would also hold the unexplored extremophiles. In this study, an organism was isolated from 40 m sea sediment under halophilic condition and identified as Bacillus aryabhattai B8W22 by 16S rRNA sequencing. The CDA gene from the isolate was cloned and overexpressed in E. coli Rosetta pLysS and purified using a Ni–NTA affinity chromatography. The enzyme was found active on both ethylene glycol chitin (EGC) and chitooligosaccharides (COS). The enzyme characterization study revealed, maximum enzyme velocity at one hour, optimum pH at 7 with 50 mM Tris–HCl buffer, optimum reaction temperature of 30 ºC in standard assay conditions. The co-factor screening affirmed enhancement in the enzyme activity by 142.43 ± 7.13% and 146.88 ± 4.09% with substrate EGC and COS, respectively, in the presence of 2 mM Mg2+. This activity was decreased with the inclusion of EDTA and acetate in the assay solutions. The enzyme was found to be halotolerant; the relative activity increased to 116.98 ± 3.87% and 118.70 ± 0.98% with EGC and COS as substrates in the presence of 1 M NaCl. The enzyme also demonstrated thermo-stability, retaining 87.27 ± 2.85% and 94.08 ± 0.92% activity with substrate EGC and COS, respectively, upon treatment at 50 ºC for 24 h. The kinetic parameters Km, Vmax, and Kcat were 3.06E?05 µg mL?1, 3.06E + 01 µM mg?1 min?1 and 3.27E + 04 s?1, respectively, with EGC as the substrate and 7.14E?07 µg mL?1, 7.14E + 01 µM mg?1 min?1 and 1.40E + 06 s?1, respectively, with COS as the substrate. The enzyme was found to be following Michaelis–Menten kinetics with both the polymeric and oligomeric substrates. In recent years, enzymatic conversion of chitosan is gaining importance due to its known pattern of deacetylation and reproducibility. Thus, this BaCDA extremozyme could be used for industrial production of chitosan polymer as well as chitosan oligosaccharides for biomedical application. © 2021, The Author(s).Item Experimentally Induced Hyperglycemia in Prepubertal Phase Impairs Oocyte Quality and Functionality in Adult Mice(Endocrine Society, 2022) Predheepan, D.; Daddangadi, A.; Uppangala, S.; Koulmane Laxminarayana, S.L.K.; Raval, K.; Kalthur, G.; Kovaĉiĉ, B.; Kumar Adiga, S.Reproductive abnormalities in women with a history of childhood diabetes are believed to be partially attributed to hyperglycemia. Prolonged hyperglycemia can negatively affect ovarian function and fertility during reproductive life. To address this in an experimental setting, the present study used streptozotocin-induced hyperglycemic prepubertal mouse model. The impact of prolonged hyperglycemic exposure during prepubertal life on ovarian function, oocyte quality, and functional competence was assessed in adult mice. The ovarian reserve was not significantly altered; however, the in vitro maturation potential (P<0.001), mitochondrial integrity (P<0.01), and meiotic spindle assembly (P<0.05-0.001) in oocytes were significantly affected in hyperglycemic animals in comparison to control groups. The results from the study suggest that prepubertal hyperglycemia can have adverse effects on the oocyte functional competence and spindle integrity during the reproductive phase of life. Because these changes can have a significant impact on the genetic integrity and developmental potential of the embryos and fetus, the observation warrants further research both in experimental and clinical settings. © 2022 The Author(s). Published by Oxford University Press on behalf of the Endocrine Society. All rights reserved.Item Enhanced degradation of azo dye using mixed cultures of white-rot fungi in a modified rotating packed disc bioreactor and reuse of treated water(Elsevier Ltd, 2023) Kalnake, R.P.; Raval, R.; Murthy, D.V.R.; Vanzara, P.B.; Raval, K.Reactive azo dyes are toxic and carcinogenic. In this study, mixed cultures of white-rot fungi (WRF) are used to treat synthetic reactive black 5 (RB-5) wastewater in a modified rotating packed disc bioreactor (RPDB). The continuous degradation studies were carried out for 25 days under the influence of the recycle stream in which 3665 L of synthetic effluent was treated. The dye wastewater was completely decolorized with more than 93 % chemical oxygen demand (COD) reduction using the mixed fungal culture. During the continuous operation, the COD of influent reduced more than 85 % for successive 25 days of continuous operation at hydraulic retention time of 10.8 h. The dry biomass loading was about 0.14 g/g GAC at the end of the continuous process. The rate of COD removal followed first order kinetics with a rate constant of 0.026 per hour. The treated water was reused to produce melanin from microbial culture. © 2023 Elsevier LtdItem Engineering a recombinant chitinase from the marine bacterium Bacillus aryabhattai with targeted activity on insoluble crystalline chitin for chitin oligomer production(Elsevier B.V., 2024) Subramani, A.K.; Ramachandra, R.; Thote, S.; Govindaraj, V.; Vanzara, P.; Raval, R.; Raval, K.Chitin, an abundant polysaccharide in India, is primary by-product of the seafood industry. Efficiently converting chitin into valuable products is crucial. Chitinase, transforms chitin into chitin oligomers, holds significant industrial potential. However, the crystalline and insoluble nature of chitin makes the conversion process challenging. In this study, a recombinant chitinase from marine bacteria Bacillus aryabhattai was developed. This enzyme exhibits activity against insoluble chitin substrates, chitin powder and flakes. The chitinase gene was cloned into the pET 23a plasmid and transformed into E. coli Rosetta pLysS. IPTG induction was employed to express chitinase, and purification using Ni-NTA affinity chromatography. Optimal chitinase activity against colloidal chitin was observed in Tris buffer at pH 8, temperature 55°C, with the presence of 400 mM sodium chloride. Enzyme kinetics studies revealed a Vmax of 2000 μmole min−1 and a Km of 4.6 mg mL−1. The highest chitinase activity against insoluble chitin powder and flakes reached 875 U mg−1 and 625 U mg−1, respectively. The chitinase demonstrated inhibition of Candida albicans, Fusarium solani, and Penicillium chrysogenum growth. Thin Layer Chromatography (TLC) and LC-MS analysis confirmed the production of chitin oligomers, chitin trimer, tetramer, pentamer, and hexamer, from chitin powder and flakes using recombinant chitinase. © 2024 Elsevier B.V.