Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Peak mooring forces in the horizontal interlaced multi-layered moored floating pipe breakwater(Society of Naval Architects of Korea, 2011) Mane, V.; Rajappa, S.; Rao, S.; Hegde, A.V.Present study aims to investigate the influence of relative breakwater width W/L (W=width of breakwater, L=wavelength), wave steepness Hi/gT2 (Hi=incident wave height, T=wave period) and relative wave height d/W (d=water depth) on forces in the moorings of horizontal interlaced multi-layered moored floating pipe breakwater (HIMMFPB) model. Studies were conducted on scaled down physical models having three layers of Poly Vinyl Chloride (PVC) pipes, wave steepness Hi/gT2 varying from 0.063 to 0.849, relative width W/L varying from 0.4 to 2.65 and relative spacing S/D=2 (S=horizontal centre-to-centre spacing of pipes, D=diameter of pipes). Peak mooring forces were also measured and data collected is analyzed by plotting non-dimensional graphs depicting variation of fs/?W2 (fs=Sea side Mooring force, ?=specific weight of water) & fl/?W2 (fl=Lee side Mooring force) with Hi/gT2 for d/W varying from 0.082 to 0.276 and also variation of fs/?W2 and fl/?W2 with W/L for Hi/d varying from 0.06 to 0.400. © SNAK, 2011.Item Variation of transmission coefficient and mooring forces with wave steepness on horizontal interlaced multilayered moored floating pipe breakwater with three layers(2011) Rajappa, S.; Pramod, K.; Hegde, A.V.; Rao, S.The paper presents the results of a series of physical model scale experiments conducted for the study of the transmission characteristics and mooring forces of horizontal interlaced, multi-layer, moored floating pipe breakwater, part of which have been presented in conferences. The studies are conducted on physical breakwater models having three layers of PVC pipes, wave steepness, Hi/L (Hi is incident wave height and L is incident wave length) varying from 0.01384 to 0.0661, relative width, W/L (W is width of breakwater) varying from 0.4 to 2.65 and relative spacing, S/D = 3 (S is horizontal spacing of pipes and D is diameter of pipe). The transmitted wave height is measured and data gathered is analyzed by plotting non-dimensional graphs depicting the variation of Kt (transmission coefficient) with Hi/L for values of d/W (d is depth of water) varying between 0.082 to 0.276 and Kt with W/L for values of d/W varying between 0.082 to 0.221. It is observed that Kt marginally decreases as Hi/L increases for the range of d/W between 0.082 and 0.221, considered in the present study. The maximum wave attenuation achieved with present breakwater configuration is 68%. The variation of measured mooring forces are analyzed by plotting non-dimensional graphs depicting fs/?w2 and fl/?W2 (fs and fl are the forces in the seaside and leeside moorings per unit length of the breakwater, ? is the unit weight of sea water) as a function Hi/L for various values of d/W. The mooring force parameter (fs /?W2) increases with an increase in wave steepness (Hi/L) for a range of d/W values studied. It is observed that for d/W = 0.082, maximum force parameter attained was 2.11E-04, and for d/W = 0.276 maximum force parameter was 6.88E-04. A similar trend is observed for leeside side force parameter. Hence, it clearly indicates the influence of d/W on f/?W2. © 2011 CAFET-INNOVA technical society. All right reserved.Item Wave steepness and relative width: Influence on transmission coefficient of horizontal interlaced, multilayered, moored floating pipe breakwater with five layers(2011) Rajappa, S.; Hegde, A.V.; Rao, S.; Channegowda, V.This paper presents the results of a series of physical model scale experiments conducted to determine the transmission characteristics of a horizontal interlaced, multilayered, moored floating pipe breakwater. The studies are conducted on physical breakwater models having five layers of PVC pipes. The wave steepness (H i/gT 2, where H i is incident wave height, g is acceleration due to gravity, and T is time period) was varied between 0.063 and 0.849, relative width (W/L, where W is width of breakwater and L is the wavelength) was varied between 0.4 and 2.65, and relative spacing (S/D, where S is horizontal centre to centre spacing of pipes and D is the diameter of pipes) was set equal to 2. The transmitted wave height is measured, and the gathered data are analyzed by plotting nondimensional graphs depicting the variation of K t (transmission coefficient) with Hi/gT 2 for values of d/W (d is depth of water) and of K t with W/L for values of H i /d. It is observed that K t decreases as H i /gT 2 increases for the range of d/W between 0.082 and 0.139. It is also observed that K t decreases with an increase in W/L values for the range of H i /d from 0.06 to 0.40. The maximum wave attenuation achieved with the present breakwater configuration is 78%.Item Experimental investigation on L-Oscillating Water Column wave energy converter integrated with floating cylindrical breakwater(Elsevier Ltd, 2025) Harikrishnan, T.A.; Rao, M.; Rao, S.One promising renewable energy source for the future is wave energy, harnessed through L-Oscillating Water Column (L-OWC) Wave Energy Converters (WECs). Combining this device with lightweight floating breakwaters can have several advantages, including absorbing wave energy and attenuating waves. L-OWC and two cylindrical floating breakwaters, one in front of the structure and one at the back are coupled in the current study. Previous research indicates that the L-shaped OWC configuration is highly effective due to its increased added mass and enhanced structural stability. The 1:30 scale model, combining a floating breakwater with an Oscillating Water Column (OWC) system, was experimentally investigated in the wave flume at the NITK, Department of Water Resources and Ocean Engineering. This setup included L-shaped OWCs integrated with cylindrical breakwater configurations (2C, 3C, and 4C). OWCs integrate with lightweight floating breakwaters, offering both wave attenuation and energy extraction. The OWC achieved maximum efficiency of 30% under optimal conditions, with a wave period of approximately 1.8s and a wave height of 0.06 m for the model with three floating breakwaters. The work aligns with the United Nations' Sustainable Development Goals (SDG), specifically addressing clean and affordable energy (SDG 7), industry, innovation, and infrastructure (SDG 9), life below water (SDG 14), and life on land (SDG 15), highlighting its significant impact. © 2024 Elsevier Ltd