Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Mitigation of mutual coupling in 2 X 2 dual slant polarized MIMO antennas using periodic array of SRRs loaded with transmission line for LTE band 40(John Wiley and Sons Inc, 2020) Bellary, A.; Kandasamy, K.; Rao, P.H.2 X 2 dual slant polarized multiple input multiple output (MIMO) antennas with reduced mutual coupling is presented for polarization and spatial diversity. The design of printed periodic array of split ring resonators (SRRs) loaded with horizontal strip transmission line is proposed to mitigate the mutual coupling among the MIMO antenna elements. An equivalent circuit model, characterizes the effect of coupling between the array of SRRs and the loaded transmission line, which together reduces the near field coupling between the adjacent antenna elements. The additional horizontal strip at the bottom is utilized to seek the return current path to the ground plane. Polarization and spatial diversity is achieved by utilizing dual slant 450 polarized antenna elements with eight independent channels. All four dual polarized antenna elements are designed to operate with a VSWR of <2 for (2.3-2.4 GHz) Band 40. Dual slant 450 polarization is achieved by utilizing two printed planar bow-tie antennas in orthogonal orientation. Measured and simulated results shows by incorporating periodic array of SRRs loaded with transmission line a considerable mutual coupling reduction of 25 to 50 dB is achieved in E-plane, H-plane, and D-plane over the required band 40. An isolation of 30 dB and an average gain of 7.5 dB is measured for dual slant 450 polarized antenna elements. MIMO performance metrics in terms of envelope correlation coefficient and diversity gain are also investigated. © 2020 Wiley Periodicals LLCItem Analysis of Wave Propagation Models with Radio Network Planning Using Dual Polarized MIMO Antenna for 5G Base Station Applications(Institute of Electrical and Electronics Engineers Inc., 2022) Bellary, A.; Kandasamy, K.; Rao, P.H.Dual polarized printed multiple input multiple output (MIMO) antenna for Band 42 (3.4 - 3.6 GHz) with wave propagation models is presented. Polarization and spatial diversity are achieved by utilizing two printed bow-tie antennas in orthogonal orientation. The designed dual polarized antenna element with $2\times 2$ , $4\times 4$ and $8\times 8$ massive MIMO antenna configuration radiation patterns are deployed in selected geographical situation for detailed radio network planning using FEKO-WinProp platform. Knife edge diffraction, extended walfisch-ikegami and dominant path wave propagation models are implemented with designed MIMO antenna configurations. Modulation schemes of QPSK and QAM with corresponding data rates and throughput for all propagation models are presented. The signal strength and quality reflecting parameters reference signal received power (RSRP), received signal strength indicator (RSSI), reference signal received quality (RSRQ), and signal to noise plus interference ratio (SNIR) are also evaluated for each model. From the simulation results dominant path model provides data rate and throughput of 3.827, 995 MBit/s and 3.577, 930.1 MBit/s for single stream of data in uplink and downlink respectively. The maximum data rate of 1.37 GBits/s is achieved for deployed base stations with $8\times 8$ massive MIMO antenna configuration effectively covering the entire geographical site. © 2013 IEEE.Item Low-profile, wideband dual-polarized 1 × 2 MIMO antenna with FSS decoupling technique(Cambridge University Press, 2022) Bellary, B.; Kandasamy, K.; Rao, P.H.A low-profile, wideband dual-polarized 1 × 2 multiple-input-multiple-output (MIMO) antenna with frequency selective surface (FSS) decoupling technique is presented. Low profile is realized with two different artificial magnetic conductor (AMC) cells out of which one operates at 3.5 GHz and other with dual band at 3.1 and 4.5 GHz. The proposed antenna height is maintained at 0.125λ0 which is significantly reduced when compared with the conventional perfect electric conductor (PEC) ground plane. Wideband dual polarization is enabled by two pairs of bow-Tie antenna elements surrounded by a square ring placed in the orthogonal orientation. To mitigate the near-field coupling in 1 × 2 MIMO an FSS wall is constructed with wide band stop characteristics from 2.85 to 4.75 GHz. Measured results show by inserting FSS wall vertically, coupling reduction is improved by 27 dB over the existing coupling and the antenna exhibits a bandwidth of 57.14% (2.95-4.95 GHz) for VSWR<2 with port isolation of more than 25 dB for entire band of operation. © © The Author(s), 2021. Published by Cambridge University Press in association with the European Microwave Association.