Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Hydrodynamic analysis of an H-shaped pile-restrained floating breakwater combined with a pair of vertical barriers(Elsevier Ltd, 2024) Panda, A.; Karmakar, D.; Rao, M.The present study analyses the performance of a composite breakwater consisting of an H-shaped breakwater attached with vertical/inclined barriers held from both sides using the Multi-Domain Boundary Element Method (MDBEM). The study is performed to analyse the wave transformation characteristics (reflection and transmission), wave energy dissipation and horizontal wave forces due to the gravity wave-structure interaction. The hydrodynamic performance of the integrated breakwater is performed due to the effect of changing various structural properties such as porosity, width and depth of structural elements, relative spacing between breakwater and barrier, angle of incidence and the inclination of the barriers. The boundary conditions and the corresponding edge conditions are incorporated for each surface and interface and correlated with Green's function to solve the boundary value problem. The detailed study proposes the suitable dimensions of the structural elements of the breakwater for optimal performance. The application of inclined barriers over the vertical barrier in certain conditions for maximising wave reflection is presented and analysed to understand the effectiveness of the barrier inclination. The favourable barrier dimensions and the suitable relative spacing for deep water regions are discussed, and the effect of rigidity and porosity of the barriers are analysed to maximise breakwater performance in wave attenuation. On considering the suitable design parameters and structural stability, the composition of vertical/inclined barriers with an H-shaped pile-restrained floating breakwater serves as a protective component by encountering maximum wave force and dissipating considerable wave energy to provide an efficient solution in harbour protection. © 2024 Elsevier LtdItem Hydrodynamic performance of H-shaped floating breakwater in the presence of a partially reflecting seawall(Taylor and Francis Ltd., 2025) Panda, A.; Muduli, R.; Karmakar, D.; Rao, M.The present study examines the hydrodynamic interaction of surface gravity waves with freely floating H-shaped porous structure situated close to a partially reflecting seawall and without seawall using Multi-Domain Boundary Element Method (MDBEM). The study is performed to examine the performance of the H-shaped floating breakwater for sway, heave, and roll motion, as well as the effects of a seawall on the hydrodynamic parameters associated with the floating body. The horizontal wave force, added mass, radiation damping coefficients, and the horizontal, vertical, and moment acting on the floating structure are analysed under different structural configurations. The numerical model developed using MDBEM approach is validated using the results available in the literature. The primary findings demonstrate that reducing the structural moments and added mass and wave force coefficients, and constructing a seawall adjacent to the breakwater, greatly enhances performance in deep water. The reflection coefficient by the seawall greatly impact damping in shallow water depth but have minimal effect in deep water region, indicating that water depth significantly impacts the wave transformation. The present study provides important insights for developing marine infrastructure in various coastal and offshore environments by demonstrating the potential for customised engineering solutions to reduce wave impacts successfully. © 2025 Informa UK Limited, trading as Taylor & Francis Group.Item Experimental investigation on L-Oscillating Water Column wave energy converter integrated with floating cylindrical breakwater(Elsevier Ltd, 2025) Harikrishnan, T.A.; Rao, M.; Rao, S.One promising renewable energy source for the future is wave energy, harnessed through L-Oscillating Water Column (L-OWC) Wave Energy Converters (WECs). Combining this device with lightweight floating breakwaters can have several advantages, including absorbing wave energy and attenuating waves. L-OWC and two cylindrical floating breakwaters, one in front of the structure and one at the back are coupled in the current study. Previous research indicates that the L-shaped OWC configuration is highly effective due to its increased added mass and enhanced structural stability. The 1:30 scale model, combining a floating breakwater with an Oscillating Water Column (OWC) system, was experimentally investigated in the wave flume at the NITK, Department of Water Resources and Ocean Engineering. This setup included L-shaped OWCs integrated with cylindrical breakwater configurations (2C, 3C, and 4C). OWCs integrate with lightweight floating breakwaters, offering both wave attenuation and energy extraction. The OWC achieved maximum efficiency of 30% under optimal conditions, with a wave period of approximately 1.8s and a wave height of 0.06 m for the model with three floating breakwaters. The work aligns with the United Nations' Sustainable Development Goals (SDG), specifically addressing clean and affordable energy (SDG 7), industry, innovation, and infrastructure (SDG 9), life below water (SDG 14), and life on land (SDG 15), highlighting its significant impact. © 2024 Elsevier LtdItem Effect of seabed condition on the hydrodynamic performance of a pile-restrained H-shaped floating breakwater(Taylor and Francis Ltd., 2025) Panda, A.; Karmakar, D.; Rao, M.The present study investigates the hydrodynamic analysis of pile-restrained H-shaped porous breakwater for various seabed conditions using the small amplitude wave theory. The Multi-Domain Boundary Element Method (MDBEM) is employed to investigate the influence of parametric variations on the hydrodynamic coefficients and horizontal wave force under normal and oblique incident waves. The numerical accuracy is ensured by comparing it with the available literature. The numerical investigation on the hydrodynamic performance of the H-shaped breakwater is performed for various seabed configurations considering different angles of slope, the width of slope/step/obstacle, step height, number of steps, soil permeability, angle of wave incidence, the width of flange and submergence draft of the web of the H-shaped structure. The findings indicate that the seabed undulation has a higher wave impact on the breakwater than the horizontal seabed. In addition, the study suggests that the sloped seabed is preferable in deeper water depths to reflect waves efficiently and the seabed permeability can affect the hydrodynamic coefficients in shallow and intermediate water depths. The study performed on the H-shaped breakwater for varying seabed topography will be helpful in the design and construction of a suitable H-shaped breakwater for an effective wave absorber in coastal regions. © 2025 Informa UK Limited, trading as Taylor & Francis Group.