Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Understanding of synergy in non-isothermal microwave-assisted in-situ catalytic co-pyrolysis of rice husk and polystyrene waste mixtures(Elsevier Ltd, 2022) Sridevi, V.; Suriapparao, D.V.; Tukarambai, M.; Terapalli, A.; Ramesh, R.; Sankar Rao, C.S.; Gautam, R.; Moorthy, J.V.; Suresh Kumar, C.Rice husk (RH) and polystyrene (PS) wastes were converted into value-added products using microwave-assisted catalytic co-pyrolysis. The graphite susceptor (10 g) along with KOH catalyst (5 g) was mixed with the feedstock to understand the products and energy consumption. RH promoted the char yield (20–34 wt%) and gaseous yields (16–25 wt%) whereas PS enhanced the oil yield (23–70 wt%). Co-pyrolysis synergy induced an increase in gaseous yields (14–53 wt%) due to excessive cracking. The specific microwave energy consumption dramatically decreased in co-pyrolysis (5–22 kJ/g) compared to pyrolysis (56–102 kJ/g). The pyrolysis index increased (17–445) with the increase in feedstock quantity (5–50 g). The obtained oil was composed of monoaromatics (74%) and polyaromatics (18%). The char was rich in carbon content (79.5 wt%) and the gases were composed of CO (24%), H2 (12%), and CH4 (22%). © 2022 Elsevier LtdItem Synthesis of sustainable chemicals from waste tea powder and Polystyrene via Microwave-Assisted in-situ catalytic Co-Pyrolysis: Analysis of pyrolysis using experimental and modeling approaches(Elsevier Ltd, 2022) Suriapparao, D.V.; Sridevi, V.; Ramesh, R.; Sankar Rao, C.S.; Tukarambai, M.; Kamireddi, D.; Gautam, R.; Dharaskar, S.A.; Pritam, K.In the current study, catalytic co-pyrolysis was performed on waste tea powder (WTP) and polystyrene (PS) wastes to convert them into value-added products using KOH catalyst. The feed mixture influenced the heating rates (17–75 °C/min) and product formation. PS promoted the formation of oil and WTP enhanced the char formation. The maximum oil yield (80 wt%) was obtained at 15 g:5 g, and the maximum char yield (44 wt%) was achieved at 5 g:25 g (PS:WTP). The pyrolysis index (PI) increased with the increase in feedstock quantity. High PI was noticed at 25 g:5 g, and low PI was at 5 g:5 g (PS:WTP). Low energy consumption and low pyrolysis time enhanced the PI value. Significant interactions were noticed during co-pyrolysis. The obtained bio-oil was analyzed using GC–MS and a plausible reaction mechanism is presented. Catalyst and co-pyrolysis synergy promoted the formation of aliphatic and aromatic hydrocarbons by reducing the oxygenated products. © 2022 Elsevier LtdItem The effect of torrefaction temperature and catalyst loading in Microwave-Assisted in-situ catalytic Co-Pyrolysis of torrefied biomass and plastic wastes(Elsevier Ltd, 2022) Ramesh, R.; Suriapparao, D.V.; Sankar Rao, C.S.; Sridevi, V.; Kumar, A.; Shah, M.In the current study, the effect of torrefaction temperatures (125–175 °C) and catalyst quantity (5–15 g) on co-pyrolysis of torrefied sawdust (TSD) and polystyrene (PS) are investigated to obtain value-added products. The role of torrefaction in co-pyrolysis of TSD: PS was analyzed to understand the product yields, synergy, and energy consumption. As the torrefaction temperature increases, oil yield (48.3–59.6 wt%) and char yield (24.3–29 wt%) increase while gas yield (27.4–11.4 wt%) decreases. Catalytic co-pyrolysis showed a significant level of synergy when compared to non-catalytic co-pyrolysis. For the conversion (%), a positive synergy maximum (-2.6) exists at a torrefaction temperature of 175 °C and 15 g of KOH catalyst. To develop the model, polynomial regression-based machine learning was used to predict pyrolysis product yields and energy usage variables. The developed models showed significant prediction accuracy (R2 > 0.98), suggesting the experimental values and the predicted values matched well. © 2022 Elsevier LtdItem Microwave assisted catalytic co-pyrolysis of banana peels and polypropylene: experimentation and machine learning optimization(Royal Society of Chemistry, 2025) Rajpurohit, N.S.; Sinha, S.; Ramesh, R.; Sankar Rao, C.; Harshini, H.The growing accumulation of agricultural and plastic waste poses serious environmental challenges, necessitating sustainable and efficient valorization strategies. This study investigates the microwave-assisted catalytic co-pyrolysis of banana peels and polypropylene, using graphite as a susceptor and potassium hydroxide as a catalyst. Experiments were conducted by varying biomass and plastic quantities and microwave power levels to study their effects on product yields and thermal performance. The process effectively converted waste materials into valuable products, with oil yield increasing with microwave power and optimized biomass-to-plastic ratios. The rate of mass loss and heating rate were found to significantly influence overall conversion efficiency. A support vector regression (SVR) model was developed to predict yields based on input parameters, achieving a coefficient of determination ranging from 0.81 to 0.99, which demonstrates the reliability of machine learning in capturing complex thermochemical behavior. 3D plots illustrated the nonlinear effects of process variables on yields. Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) analyses of char confirmed functional groups and crystalline phases, suggesting its suitability for applications like adsorbents or catalysts. Brunauer-Emmett-Teller (BET) analysis showed multilayer adsorption, while thermogravimetric analysis (TGA) highlighted distinct thermal degradation patterns of the feedstocks. These results affirm the promise of integrating experiments with ML for efficient waste-to-energy conversion. © 2025 The Royal Society of Chemistry.