Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
Search Results
Item Processing of laboratory concrete demolition waste using ball mill(Elsevier Ltd, 2023) Rakesh Kumar Reddy, R.; Yaragal, S.C.; Sanjay, V.K.The demand for natural aggregates in the twenty-first century is at an all-time high due to rapid urbanisation and infrastructure development. Finding alternative aggregate materials is a challenge for achieving construction sustainability. Both the depletion of natural resources and the improper disposal of construction and demolition (C&D) waste can be ameliorated by the widespread use of recycled aggregates in construction. Due to the attached mortar, aggregates from C&D waste must be processed before using them in concrete. Various combinations of ball mill processing parameters were used to produce relatively higher-quality aggregates. Water absorption was used as the primary criterion for determining the quality of processed aggregates. The water absorption capacity of recycled coarse aggregate was found to be decreased from 5.8% to 1.5% as a result of effectively removing the attached mortar by employing ball mill processing. Specific gravity, impact, and crushing values are also improved after processing, as discussed and illustrated in this paper. © 2023Item One-part eco-friendly alkali-activated concrete – An innovative sustainable alternative(Elsevier Ltd, 2023) Rakesh Kumar Reddy, R.; Yaragal, S.C.; Srinivasa, A.S.The primary objective of this study is to develop an eco-friendly one-part alkali-activated concrete (OPAAC) by incorporating a combination of fly ash (FA), ground granulated blast furnace slag (GGBS), and micro silica (MS). In this investigation, the proportion of MS is maintained at 20% of FA, while the maximum replacement of FA with GGBS is set to 60%, varying in 20% intervals (i.e., 0%, 20%, 40%, and 60%). Further, the natural aggregates (NA) are substituted with recycled coarse aggregates (RCAs), ferrochrome slag aggregates (FCSAs), or a combination of both. The influence of GGBS and alternative aggregates (RCAs, FCSAs) on the mechanical properties of OPAAC is thoroughly examined. To provide a comprehensive assessment, the properties of OPAAC are compared against Ordinary Portland Cement (OPC) concrete (CC) of equivalent grades. Additionally, microstructural and mineralogical investigations are conducted to determine the formation of distinct hydration products, utilizing scanning electron microscopy (SEM) and X-ray diffractometry (XRD) techniques. In OPAAC containing FA, the primary hydration products identified are alkaline alumino silicate hydrates (CASH and NASH). As the GGBS content increases, calcium silicate hydrate (CSH) becomes the predominant hydration product. Furthermore, in order to assess the sustainability of OPAAC, an analysis of embodied CO2 emissions is performed, and the results are compared with CC and alkali-activated concrete. Notably, OPAAC comprising 40% FA replaced with GGBS, 50% RCAs, and 50% FCSAs demonstrates the most favourable mechanical properties and exhibits lower CO2 emissions. © 2023 Elsevier Ltd