Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Thermal expansion of Crofer 22 APU steel used for SOFC interconnect using in-situ high temperature X-ray diffraction(Elsevier Ltd, 2023) Manjunath, N.; Santhy, K.; Rajasekaran, B.Crofer 22 APU is ferritic stainless steel extensively used as metallic interconnect material in Solid Oxide Fuel Cell (SOFC) applications. The interconnects are exposed to both oxidizing and reducing atmospheres at high temperatures. As SOFCs are operated above 700 °C, understanding the thermal expansion behavior of the interconnect material with other components (anode, cathode, electrolyte) of the fuel cells is essential. Metallic interconnects should have a matchable thermal expansion to other ceramic materials such as anode, cathode, and solid electrolyte used in SOFCs. The present study evaluates the thermal expansion of Crofer 22 APU steel from 25 to 950 °C in a controlled atmosphere (10-4 mbar pressure) using in-situ high-temperature X-ray diffraction (XRD). The XRD patterns were analyzed using the ‘High Score Plus Software’ attached to the system, and the phases were identified using the standard Crystallographic Open Database (COD). The coefficient of thermal expansion (CTE) was determined based on the change in lattice parameter/peak shift to a lower 2θ value as a function of temperature. The normal XRD data showed no oxide formation on the Crofer steel after heating until 950 °C in in-situ high-temperature conditions. The peak shift to the lower 2θ degree observed in the XRD data was due to the relaxation of residual stress upon heating. The isothermal section and phase fraction of Crofer 22 APU alloys are analyzed with the help of thermo-calc with the iron database of TCFE7. The Fe-rich bcc phase was found to be stable up to high temperatures. The major phases are the Fe-rich bcc, Cr-rich BCC, and sigma phase in the solid state. The minor phases are FCC, M3P, TiC, Laves, and Ti4C2S2. The calculated lattice parameter of the Fe-rich BCC phase matches with the experimentally calculated data using XRD. The thermal expansion of Crofer 22 APU was found to be 11.9181 × 10-6 /°C at 950 °C. The in-situ high-temperature XRD technique has been an effective methodology for determining the thermal expansion behavior of the as-received Crofer steel. © 2023Item Thermal expansion and microstructure evolution of atmospheric plasma sprayed NiCrAlY bond coat using in-situ high temperature X-ray diffraction(Elsevier B.V., 2023) Abhijith Vijay, V.; Santhy, K.; Govindarajan, G.; Rajasekaran, B.The paper focuses on in-situ high-temperature X-ray diffraction (HT-XRD) study on atmospheric plasma sprayed NiCrAlY coating. The sample was in-situ heated from 25 °C to 1150 °C in a controlled atmosphere (3 × 10−4 bar), and the corresponding X-ray diffraction patterns for different temperatures were recorded. The effect of temperature on crystallite size, lattice strain, and coefficient of linear thermal expansion was studied. Major phases identified are γ-Ni, γ’-Ni3Al, β-NiAl, and α-Cr. The formation of stable α-Al2O3 and spinel was found above 1000 °C. The transformation of β to γ’ and γ phase was observed as a function of temperature. The equilibrium phases and the thermal expansion of disordered Face Centered Cubic (FCC) and Body Centered Cubic (BCC) phases were predicted and supported by Thermo-Calc prediction for the stable temperature range. Results showed that the non-equilibrium microstructure produced by thermal spray process did not alter the thermal expansion behaviour. In-situ treatment resulted in microstructure and elemental homogenization. The thermal expansion and mechanism of phase evolution were discussed. © 2022 Elsevier B.V.Item Effect of thermal expansion on the high temperature wear resistance of Ni-20%Cr detonation spray coating on IN718 substrate(Elsevier B.V., 2023) Purushotham, N.; Parthasarathi, N.L.; Babu, P.S.; Govindarajan, G.; Rajasekaran, B.The temperature-dependent materials properties on the dry sliding wear resistance of the detonation sprayed Ni-20%Cr coating have been studied. In-situ high-temperature X-ray diffraction (HT-XRD) was used to investigate high-temperature properties such as stress relieving, recrystallization, and thermal expansion. The dry sliding wear test was performed by using a ball-on-disc tribometer by sliding velocities (0.1 m/s), varying loads (6 N and 10 N), and temperatures (25 °C and 850 °C) against alumina (Al2O3) ball. The phase evolution, thermal expansion, crystallite size, and lattice strain were determined by the Williamson-Hall method. Field emission scanning electron microscopy and a non-contact optical profilometer was used to characterize the wear scar and calculate the wear rate. The wear test results demonstrated that the as-deposited coatings coefficient of friction (CoF) and wear rate (ω) continuously decreased as the temperature increased. The primary wear mechanism changed from abrasive and surface fatigue to adhesive and oxidative wear. The impact of stress relieving, recrystallization, and forming a composite tribolayer (Cr2O3, NiO) at elevated temperatures reduced the friction and enhanced the wear resistance. The effect of stress relieving, recrystallization, thermal expansion, and oxidation on the wear resistance of the coating has been discussed with a suitable mechanism. © 2023 Elsevier B.V.Item On the merit of solute segregation and low angle grain boundary for thermal stability and thermal expansion of cold-sprayed CuCrZr(Elsevier Ltd, 2025) Abhijith Vijay; Sreerag, M.P.; Varalakshmi, S.; Santhy, K.; Singh, R.; Kondás, J.; Makineni, S.K.; Rajasekaran, B.The precipitation hardenable CuCrZr alloy is a potential alternative to copper for inner liners in rocket thrust engines. Cold spray manufacturing has been seen as a promising processing route to manufacture bulk additive structure of CuCrZr. This work reveals that the cold-sprayed as-deposited Cu-Cr-Zr alloy, in its inherent non-equilibrium state. It is highly stable up to 950 °C and exhibits lower thermal expansion than the equilibrium Cu-Cr-Zr alloy, deduced using HT-XRD and Thermo-Calc. Atomic-scale compositional and diffraction analysis using Atom Probe Tomography (APT) and Electron Backscatter Diffraction (EBSD) support the Zener pinning effect of Cr segregation near the grain boundaries, along with a large fraction of low-angle grain boundaries (LAGBs), that contribute to the high thermal stability and controlled thermal expansion of the deposit. Cold spray deposition naturally yields microstructural features that are conducive to high thermal stability and controlled thermal expansion, features which are comparable to the self-organized microstructures observed in segregation engineering (SE). © 2025 Elsevier B.V.