Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item An optimization study of microwave assisted extraction of oil from oily sludge using response surface methodology(CAFET INNOVA Technical Society cafetinnova@gmail.com 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2014) Kumar, B.; Raj Mohan, B.Petroleum oily sludge, a hazardous waste, generated by the refineries and at the production sites in huge quantities comprises of a mixture of petroleum hydrocarbons, asphaltenes, long chain paraffinic wax, waste water, sediments and metals. The present study is aimed to recover oil from the petroleum oily sludge using n-heptane as the solvent in microwave assisted solvent extraction process and to optimize the process variables for the recovery of oil from the oily sludge. The simultaneous effects of process variables such as irradiation time (2 - 10 minutes), solvent to sludge ratio (40 – 80 wt %), reactant volume (100 – 300 ml) and microwave power (80 – 400 W) on the recovery of oil were evaluated. A central composite design (CCD) and response surface methodology (RSM) were used for the optimization of the extraction process. Based on the CCD, quadratic model was developed to correlate the extraction process variables with the responses and the model was analysed using appropriate statistical method (ANOVA). Optimization of process variables shows that the maximum recovery of oil was about 88.6% at 100 ml of reactant volume with microwave power output of 351 W at 6.5 minutes of irradiation time with 58.99% of nheptane to sludge ratio. © 2014 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Microwave-Assisted Extraction of Wax from Oily Sludge: An Experimental Study and its Process Variables Optimization Using Response Surface Methodology(Bellwether Publishing, Ltd., 2015) Kumar, B.; Raj Mohan, B.The wax present in petroleum sludge, generated by refineries and at crude production sites, consists of paraffin hydrocarbons (C18–C36) known as paraffin wax and naphthenic hydrocarbons (C30–C60). The present study is aimed at the recovery of wax from petroleum oily sludge by microwave-assisted solvent extraction using a Toluene/MEK mixture and subsequently de-crystallizing the wax. The process variables affecting the microwave-assisted solvent extraction are optimized for recovery of wax. The simultaneous effects of process variables such as irradiation time (2–10 minutes), solvent to sludge ratio (40–80 wt%), reactant volume (100–300 ml), and microwave power (80–400 W) on the recovery of wax were evaluated. A central composite design and response surface methodology were used for the optimization of the extraction process. Based on the central composite design, quadratic models were developed to correlate the extraction process variables with the responses and the models were analyzed using appropriate statistical methods for analysis of variance. Optimization of process variables shows the maximum recovery of wax was about 79.57% at 300 ml of reactant volume with microwave power output of 400 W at 7.6 minutes of retention time with 56.56% of Toluene/MEK to sludge ratio. © 2015, Taylor & Francis Group, LLC.Item Bio-oil from microwave assisted pyrolysis of food waste-optimization using response surface methodology(Elsevier Ltd, 2019) Kadlimatti, H.M.; Raj Mohan, B.; Saidutta, M.B.Municipal solid waste (MSW) contains on an average 40% food waste and needs to be managed in an environment friendly manner. Food wastes have high energy content and offer a good potential feed stock for pyrolysis. Microwave assisted pyrolysis of food waste at different microwave power levels has been carried out in the present study. Maximum bio-oil yield of 30.24 wt.% is obtained under the optimized pyrolysis conditions of 400 °C temperature, 30 min residence time and 50 mL min-1 of nitrogen flow rate at the microwave power of 450 W. The regression model with 95% confidence level resulted in the high value of R2 = 95.4% with R2 adjusted = 91.2% indicates a very good or excellent fit of the data to the model. Main functional groups as detected by the Fourier transform infrared (FTIR) analysis are alcohols, alkenes, aromatic compounds, primary and secondary amines, carboxylic acid, esters and phenols. Oxygenated and non oxygenated compounds, nitrogenated compounds and other compounds such as phosphine, methyl-, propane, 2-fluoro-, (2-hydroxyethyl) trimethylsilyl methyl sulfide, and 1,3-bis(2-hydroxymethyl)urea have been identified by the gas chromatography/mass spectrometry (GC-MS) analysis. The heating value of the bio-oil was 23.94 MJ kg?1. © 2019 Elsevier LtdItem Microwave-assisted pyrolysis of food waste: optimization of fixed carbon content using response surface methodology(Taylor and Francis Ltd., 2021) Kadlimatti, H.M.; Raj Mohan, B.; Saidutta, M.B.Pyrolysis of food waste using microwave irradiation was carried out in this study to produce quality biochar for heating applications. Optimum conditions for microwave-assisted pyrolysis of food waste particles were determined using response surface methodology (RSM). Combined effects of the operating variables, namely pyrolysis temperature (°C), residence time (min) and nitrogen flow rate (mL min?1), were analyzed by conducting 20 experiments. Microwave-assisted pyrolysis results were correlated by applying RSM with the regressions coefficients of 92.90% for biochar and 90.305% for fixed carbon content. Microwave power of 450 W yielded 60.03 wt. % of biochar with a fixed carbon content of 48.71 wt. % under the optimum pyrolysis conditions of 400 °C temperature, 30 min residence time and 50 mL min?1 of nitrogen flow rate. The higher heating value of the biochar was 33.35 MJ kg?1. © 2019 Informa UK Limited, trading as Taylor & Francis Group.