Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Effect of Temperature on Solid-State Reaction of Prawn Shell-Derived Phase-Pure β-Tricalcium Phosphate(Springer, 2024) Satish, P.; Praveen, L.L.; Gautam, V.; Hadagalli, K.; Mandal, S.Over the past three decades, bioresorbable ceramics such as beta-tricalcium phosphate (β-TCP)-based porous scaffolds have been extensively studied. β-TCP-based scaffolds or cements for bone tissue applications have proved to be an outstanding alternative to repair and regenerate bone tissue defects caused by trauma or injury. In this study, an investigation on submicron β-TCP powders derived from prawn shell (Fenneropenaeus indicus, a source of marine biowaste) via solid-state reaction approach was carried out, which has calcite (CaCO3) in its exoskeleton (nonedible). The prawn shell-derived β-TCP can be prepared conventionally with dicalcium phosphate (CaHPO4) at different temperatures 900, 1000, 1100, and 1200 °C. The EDX spectra detect the Ca:P ratio of 1.5 confirming the formation of pure β-TCP at 1100 °C, which is in complete agreement with theoretical ratio. X-ray diffraction pattern revealed the phase-pure crystalline rhombohedral crystal structure of β-TCP with an average crystallite size of ~ 25.8 nm, prepared at 1100 °C. The field emission scanning electron microscopy images showed a homogeneous distribution of β-TCP powders with an average grain size of 3.07 µm at 1100 °C. Furthermore, Raman spectroscopy and Fourier transform infrared spectroscopy confirm the characteristics peaks of β-TCP. Differential scanning calorimetry and thermogravimetric analysis are performed to study the thermal behavior of the initial precursors mixture to synthesize β-TCP. β-TCP scaffolds sintered at 1100 °C exhibited compressive strength of ~ 6.2 MPa, for which Ca/P ratio is 1.51. Biodegradation study conducted on β-TCP scaffolds sintered at 1100 °C has shown slow degradation rate up to 5 days. Therefore, the prawn shell-derived β-TCP has physical and morphological properties which projects it as a promising implantable biomaterial for synthetic bone graft substitutes. © ASM International 2024.Item A comparative analysis of crustacean exoskeletons: structural, microstructural, morphological, and UV absorption studies(Institute of Physics, 2024) Nowl, M.S.; Praveen, L.L.; Ambili, V.; Singh, S.; Samad, U.; Seikh, A.H.; Dutta, S.; Mandal, S.This study aims to investigate the structural, thermal, and spectral characteristics, along with the ultra-violet (UV) absorption of various marine benthos exoskeletons, such as various species of crabs (Portunus sanguinolentus, Portunus pelagicus, Charybdis feriata) and mantis shrimp (Oratosquilla oratoria). Their unique properties and ability to survive in harsh oceanic environments make them interesting research subjects. This research utilized powder x-ray diffraction (XRD) analysis to determine the crystal structure of the benthic varieties. The sample surface was analyzed using high-resolution micrographs obtained from field-emission scanning electron microscopy (FESEM), which identified the presence of chitin and calcite in the marine benthos. This was further confirmed by differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The optical characteristics were investigated using UV-visible spectroscopy. The proximate analysis revealed high protein content in the mantis shrimp exoskeleton compared to other crab species, highlighting its excellent UV absorption characteristics. Overall, this research has the potential to broaden our understanding of marine organisms, which can have potential applications in biotechnology and materials science to develop nature-inspired innovative materials sustainably. © 2024 The Author(s). Published by IOP Publishing Ltd.Item All-printed WO3 films on an Ag-interdigitated electrode derived from aqueous screen-printable inks for room-temperature ammonia gas detection(Institute of Physics, 2025) Praveen, L.L.; Singh, N.P.; Vardhan, R.V.; Mandal, S.In this work, all-printed tungsten oxide (WO3) sensors were fabricated from nanoparticle-based screen-printable inks, where the WO3 nanopowders were hydrothermally synthesized with various HCl concentrations to give enhanced room-temperature detection of ammonia (NH3) gas. The monoclinic phase of WC powders (calcined WO3) with square nanoplate-like morphology and porosities was identified from x-ray diffraction, field-emission scanning electron microscopy and Brunauer-Emmett-Teller surface area analysis. The silver precursor ink-derived interdigitated electrodes were found to be crystalline with an average finger width and Ag film thickness of 1 ± 0.4 mm and 3.8 ± 0.5 µm, respectively. The formulated WO3 inks with hydroxyethyl cellulose showed a thixotropic fluid-like behavior and exhibited a viscosity of ?9 × 104 mPa s, which is a key requirement for screen printing. Rheological study of the formulated WC inks revealed a thixotropic nature, with all WC inks showing a viscosity of 85 ± 3 Pa s and a recovery rate of 80% in the recovery stage. This work explains the role of pH in hydrothermally synthesis of WO3 by correlating the gas-sensing characteristics of the screen-printed sensors fabricated from formulated inks, where the WC-15 gas sensor showed a maximum gas response of ?340 towards 100 ppm of NH3 gas. This facile and cost-effective method for fabricating chemiresistive gas sensors could pave the way for the development of flexible and printable devices for ppb-level detection of NH3 gas and its monitoring. © 2025 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.