Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
11 results
Search Results
Item Bio-Inspired, Ultra-hydrophobic Natured Durable Thermal-Sprayed Ytterbium-Oxide Coatings: Review and Perspectives(Taylor and Francis Ltd., 2024) Praveen, L.L.; Kailasam, K.; Vardhan, R.V.; Mandal, S.Ever since the discovery of ultra-hydrophobicity in lotus leaf, rigorous experiments have been carried out to replicate and understand its wetting nature using ceramic oxide based coatings on various substrates. Enormous applications dealing with ultra-hydrophobic nature have been explored which led to the discovery of intrinsic hydrophobic nature in rare-earth oxides. Several studies reported intrinsic hydrophobic behavior exhibited by rare earth oxides. Among all rare earth oxides, ytterbium-oxide (Yb2O3) has numerous applications in different fields because of its ability to phase change with pressure, abrasion resistance, high hardness and melting point. This review gives a basic understanding of wettability studies carried out on Yb2O3 coating via the solution precursor plasma spray (SPPS) technique outlined in the literature and aims to understand the mechanism of post-processing treatments, revealing the conditions affecting the reversible wettability. Additionally, the mechanical durability tests performed on thermal-sprayed Yb2O3 coatings are summarized along with the cost-effective approach of SPPS technique over other plasma spray techniques. The ultra-hydrophobicity in Yb2O3 coatings and its existing applications propels the development of novel device-designing strategies in the field of bio-sensing and oil-water separation. © 2024 Indian Ceramic Society.Item Room-temperature detection of ammonia and formaldehyde gases by La xBa1?xSnO3?? (x = 0 and 0.05) screen printed sensors: effect of ceria and ruthenate sensitization(Springer Science and Business Media Deutschland GmbH, 2021) Manjunath, G.; Vardhan, R.V.; Praveen, L.L.; Pothukanuri, P.; Mandal, S.In the present work, gas sensing properties of the screen printed ceria and ruthenate-sensitized BaSnO3 (BSO) with La doping heterostructure sensors towards the detection of ammonia and formaldehyde gases at room temperature were studied. Adhered, porous screen printed films with different morphologies were obtained by depositing the LaxBa1?xSnO3?? (x = 0 and 0.05) powder particles prepared by the polymerized complex method. Ceria and ruthenate sensitization for screen printed LaxBa1?xSnO3?? (x = 0.05) film was processed through dip-coating in the 0.03 M aqueous solution of CeCl3 and RuCl3, respectively. La-doped BaSnO3 (LBSO) sensor with smaller crystallites, needle-like morphology and high concentration of oxygen vacancies exhibited superior gas response of 65 and 29 towards 50 ppm of ammonia and formaldehyde gases, respectively. Superabundant sensitization of ceria and ruthenate reduced the oxygen vacancy and structural open porosity in the LBSO sensor; therefore, the ammonia gas response was decreased from 65 to 14 and 3, respectively, whereas the formaldehyde gas response was reduced to less than 1/6th times the LBSO sensor. Limit of detection of LBSO sensors was estimated to be ~ 1 and ~ 2 ppm against ammonia and formaldehyde, respectively. The presence of fluorite structured phase ceria with high oxygen atoms storage capacity facilitates the rapid oxidization of analyte gases and caused the expeditious response (75 s) and recovery (60 s) in CeOx-sensitized LBSO sensor. This study might give a new insight into the development of doped and sensitized BSO-based gas sensors operating at ambient conditions. © 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.Item Role of Mg–O on phase stabilization in solution combustion processed rocksalt structured high entropy oxide (CoCuMgZnNi)O with high dielectric performance(Elsevier Ltd, 2023) Salian, A.; Praveen, L.L.; P, S.K.; Mandal, S.High entropy oxide (CoCuMgZnNi)O with a phase pure rocksalt was synthesized using low-temperature solution combustion. The precursors were found to combust at 270 °C and 400 °C was considered to be the formation temperature. The high entropy rocksalt oxide (HERO) fully stabilized at 1000 °C shows a single-phase, fcc rocksalt structure with an Fm-3m space group. HERO displays one of its parent oxide Mg–O structural properties as both belong to the cubic family and had lattice parameters very close to each other. The lower cation systems exhibited a transition from spinel to rocksalt structure with the addition of Mg–O. Raman of HERO affirmed a completely disordered occupancy of various metal cations, the formation of HERO at 400 °C, and phase stabilization at 1000 °C. Dielectric measurements at room temperature showed high permittivity (κ) with magnitudes ∼1.9 × 103, 4.7× 101, and 0.9 × 101 at 100, 1k, and 100k Hz. © 2023 Elsevier Ltd and Techna Group S.r.l.Item Hydroxyapatite–Clay Composite for Bone Tissue Engineering: Effective Utilization of Prawn Exoskeleton Biowaste(Multidisciplinary Digital Publishing Institute (MDPI), 2023) Satish, P.; Hadagalli, K.; Praveen, L.L.; Nowl, M.S.; Seikh, A.H.; Alnaser, I.A.; Abdo, H.S.; Mandal, S.Hydroxyapatite (HA, Ca10(PO4)6(OH)2)-based porous scaffolds have been widely investigated in the last three decades. HA, with excellent biocompatibility and osteoconductivity, has made this material widely used in bone tissue engineering. To improve the mechano-biological properties of HA, the addition of clay to develop HA-based composite scaffolds has gained considerable interest from researchers. In this study, a cost-effective method to prepare a HA–clay composite was demonstrated via the mechanical mixing method, wherein kaolin was used because of its biocompatibility. Prawn (Fenneropenaeus indicus) exoskeleton biowaste was utilized as a raw source to synthesize pure HA using wet chemical synthesis. HA–clay composites were prepared by reinforcing HA with 10, 20, and 30 wt.% of kaolin via the mechanical mixing method. A series of characterization tools such as XRD, FTIR, Raman, and FESEM analysis confirmed the phases and characteristic structural and vibrations bonds along with the morphology of sintered bare HA, HA–kaolin clay composite, and kaolin alone, respectively. The HA–clay composite pellets, uniaxially pressed and sintered at 1100 °C for 2 h, were subjected to a compression test, and an enhancement in mechanical and physical properties, with the highest compressive strength of 35 MPa and a retained open porosity of 33%, was achieved in the HA–kaolin (20 wt.%) clay composite, in comparison with bare HA. The addition of 20% kaolin to HA enhanced its compressive strength by 33.7% and increased its open porosity by 19% when compared with bare HA. The reinforcement of HA with different amounts (10, 20, 30 wt.%) of kaolin could open up a new direction of preparing biocomposite scaffolds with enhanced mechanical properties, improved wear, and better cell proliferation in the field of bone tissue engineering. © 2023 by the authors.Item Effect of Temperature on Solid-State Reaction of Prawn Shell-Derived Phase-Pure β-Tricalcium Phosphate(Springer, 2024) Satish, P.; Praveen, L.L.; Gautam, V.; Hadagalli, K.; Mandal, S.Over the past three decades, bioresorbable ceramics such as beta-tricalcium phosphate (β-TCP)-based porous scaffolds have been extensively studied. β-TCP-based scaffolds or cements for bone tissue applications have proved to be an outstanding alternative to repair and regenerate bone tissue defects caused by trauma or injury. In this study, an investigation on submicron β-TCP powders derived from prawn shell (Fenneropenaeus indicus, a source of marine biowaste) via solid-state reaction approach was carried out, which has calcite (CaCO3) in its exoskeleton (nonedible). The prawn shell-derived β-TCP can be prepared conventionally with dicalcium phosphate (CaHPO4) at different temperatures 900, 1000, 1100, and 1200 °C. The EDX spectra detect the Ca:P ratio of 1.5 confirming the formation of pure β-TCP at 1100 °C, which is in complete agreement with theoretical ratio. X-ray diffraction pattern revealed the phase-pure crystalline rhombohedral crystal structure of β-TCP with an average crystallite size of ~ 25.8 nm, prepared at 1100 °C. The field emission scanning electron microscopy images showed a homogeneous distribution of β-TCP powders with an average grain size of 3.07 µm at 1100 °C. Furthermore, Raman spectroscopy and Fourier transform infrared spectroscopy confirm the characteristics peaks of β-TCP. Differential scanning calorimetry and thermogravimetric analysis are performed to study the thermal behavior of the initial precursors mixture to synthesize β-TCP. β-TCP scaffolds sintered at 1100 °C exhibited compressive strength of ~ 6.2 MPa, for which Ca/P ratio is 1.51. Biodegradation study conducted on β-TCP scaffolds sintered at 1100 °C has shown slow degradation rate up to 5 days. Therefore, the prawn shell-derived β-TCP has physical and morphological properties which projects it as a promising implantable biomaterial for synthetic bone graft substitutes. © ASM International 2024.Item Anti-biofouling evaluation of vacuum-assisted hydrophobic ytterbium oxide (Yb2O3) coating on stainless steel by facile spray combustion(Springer, 2024) Karle, S.S.; Kailasam, K.; Vardhan, R.V.; Praveen, L.L.; Gautam, V.; Mandal, S.Despite the development of numerous coating techniques and materials, today’s anti-biofouling applications require coatings that are facile and mechanically robust in nature. Studies on the hydrophobicity of rare-earth oxides have risen due to their unusual chemical properties; ytterbium oxide is one such oxide substance. In this study, spray combustion was used to create a hydrophobic coating of ytterbium oxide (Yb2O3) on a stainless steel (SS) substrate, which was then vacuum-treated. GI-XRD analysis confirmed the sesquioxide cubic crystalline structure of Yb2O3. FESEM images displayed an underneath wavy morphological coating with discrete particles on the surface. The thickness and roughness were ~12 and ~0.17 µm, respectively. When 5 and 10 N loads were applied, the coating showed better scratch hardness than uncoated SS. Water contact angle (WCA) <10° indicated superhydrophilicity in the fabricated coating. After vacuum treatment, it became hydrophobic, and the WCA was 128°; because of the increment in the relative area fraction of the C–H bond. The proportion of area covered by blue–green algae (Phormidium sp.) on vacuum-treated Yb2O3 coating was only 3% compared to uncoated SS samples, 80%. © Indian Academy of Sciences 2024.Item Detection of ethanol gas at room temperature by In2O3-based screen-printed films fabricated through particle-free aqueous solution combustible inks(Institute of Physics, 2024) Vardhan, R.V.; Praveen, L.L.; Manjunath, G.; Pothukanuri, P.; Seikh, A.H.; Alnaser, I.A.; Mandal, S.The current work investigates the room temperature ethanol gas detection capabilities of pristine, Sn-doped, Zn-doped, Sn & Zn co-doped In2O3-based screen-printed films, fabricated using particle-free aqueous solution combustible inks on glass substrates. The fabricated films were pure, polycrystalline with cubic bixbyite crystal structure, porous, and transparent (∼75 to 95%) in the visible range. Relatively high surface roughness was detected in pristine film than in doped films. Ethanol gas was detected by all the films at room temperature. Among all, the pristine film showed a relatively greater gas response at all concentrations of ethanol gas ranging from 25 ppm to 100 ppm. This superior gas response was attributed to comparatively greater oxygen vacancy concentration (OV/OL), relative area fraction of surface adsorbed oxygen (% of OA), and high surface roughness with porosity. The maximum ethanol gas response attained was ∼17 at 100 ppm concentration by the pristine film, which also demonstrated high selectivity to ethanol gas. © 2024 The Author(s). Published by IOP Publishing Ltd.Item A comparative analysis of crustacean exoskeletons: structural, microstructural, morphological, and UV absorption studies(Institute of Physics, 2024) Nowl, M.S.; Praveen, L.L.; Ambili, V.; Singh, S.; Samad, U.; Seikh, A.H.; Dutta, S.; Mandal, S.This study aims to investigate the structural, thermal, and spectral characteristics, along with the ultra-violet (UV) absorption of various marine benthos exoskeletons, such as various species of crabs (Portunus sanguinolentus, Portunus pelagicus, Charybdis feriata) and mantis shrimp (Oratosquilla oratoria). Their unique properties and ability to survive in harsh oceanic environments make them interesting research subjects. This research utilized powder x-ray diffraction (XRD) analysis to determine the crystal structure of the benthic varieties. The sample surface was analyzed using high-resolution micrographs obtained from field-emission scanning electron microscopy (FESEM), which identified the presence of chitin and calcite in the marine benthos. This was further confirmed by differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The optical characteristics were investigated using UV-visible spectroscopy. The proximate analysis revealed high protein content in the mantis shrimp exoskeleton compared to other crab species, highlighting its excellent UV absorption characteristics. Overall, this research has the potential to broaden our understanding of marine organisms, which can have potential applications in biotechnology and materials science to develop nature-inspired innovative materials sustainably. © 2024 The Author(s). Published by IOP Publishing Ltd.Item Exploring the protection of spray-pyrolysed tungsten oxide hydrophobic coating on stainless steel in a marine environment(Springer, 2024) Gautam, V.; Praveen, L.L.; Vardhan, R.V.; Mandal, S.Tremendous potential in the field of anti-biofouling coatings to prevent stainless steel (SS)-based underwater pipelines, sea vessels and other marine structures have been recognized to protect from biofouling, which is often initiated by algae attachment over the surface. In this work, hydrophobicity in spray-pyrolysed tungsten oxide (TO) coating on SS-316 substrate has been reported for the first time, via post-processing treatment using octadecyltrimethoxysilane (ODTMS) to induce self-assembled monolayer (SAM). Initially, structural and vibrational characteristics of ODTMS and ODTMS-treated TO (OTO) coating on SS were analysed using X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman spectroscopies. OTO-coating depicted a water contact angle (WCA) of 121°, revealing its hydrophobic nature, with further affirmation from X-ray photoelectron spectroscopy (XPS). Durability of the TO-coating was explored using the scratch hardness (Hs) test at different loading conditions (5, 10 and 15 N). Biofouling study was conducted by culturing blue-green algae (BGA, Phormidium sp.) in an in-house laboratory setup for 40 days, using seawater (collected from the Arabian Sea, Karnataka). The SS, TO- and OTO-coatings were immersed for 14 days in a controlled sea-water environment in the laboratory with the presence of BGA. A comparative study on the areal-algae attachment was keenly analysed over SS-, TO- and OTO-coatings. This work can be projected as a promising application providing multi-dimensional solutions in creating scratch-resistant and anti-biofouling coatings on SS in the shipbuilding industry. © Indian Academy of Sciences 2024.Item All-printed WO3 films on an Ag-interdigitated electrode derived from aqueous screen-printable inks for room-temperature ammonia gas detection(Institute of Physics, 2025) Praveen, L.L.; Singh, N.P.; Vardhan, R.V.; Mandal, S.In this work, all-printed tungsten oxide (WO3) sensors were fabricated from nanoparticle-based screen-printable inks, where the WO3 nanopowders were hydrothermally synthesized with various HCl concentrations to give enhanced room-temperature detection of ammonia (NH3) gas. The monoclinic phase of WC powders (calcined WO3) with square nanoplate-like morphology and porosities was identified from x-ray diffraction, field-emission scanning electron microscopy and Brunauer-Emmett-Teller surface area analysis. The silver precursor ink-derived interdigitated electrodes were found to be crystalline with an average finger width and Ag film thickness of 1 ± 0.4 mm and 3.8 ± 0.5 µm, respectively. The formulated WO3 inks with hydroxyethyl cellulose showed a thixotropic fluid-like behavior and exhibited a viscosity of ?9 × 104 mPa s, which is a key requirement for screen printing. Rheological study of the formulated WC inks revealed a thixotropic nature, with all WC inks showing a viscosity of 85 ± 3 Pa s and a recovery rate of 80% in the recovery stage. This work explains the role of pH in hydrothermally synthesis of WO3 by correlating the gas-sensing characteristics of the screen-printed sensors fabricated from formulated inks, where the WC-15 gas sensor showed a maximum gas response of ?340 towards 100 ppm of NH3 gas. This facile and cost-effective method for fabricating chemiresistive gas sensors could pave the way for the development of flexible and printable devices for ppb-level detection of NH3 gas and its monitoring. © 2025 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.