Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Prasad Dasari, H.P.Subject: search.filters.subject.Catalytic oxidation

Search Results

Now showing 1 - 6 of 6
  • No Thumbnail Available
    Item
    Ceria-samarium binary metal oxides: A comparative approach towards structural properties and soot oxidation activity
    (Elsevier B.V., 2018) Anjana, A.P.; Geethu, J.; P, M.R.; Prasad Dasari, H.P.; Lee, J.-H.; Harshini, H.; Bhaskar Babu, G.U.
    Binary metal oxides of CeO2-Sm2O3 (CSx, x varies from 10 to 90 mol%) along with pure CeO2 and Sm2O3 were synthesised successfully by the EDTA-Citrate method. From XRD, Raman spectroscopy and UV–vis DRS results, the whole composition of metal oxides exist in three phases: (fluorite phase (F) (CS10-CS30), bi-phase (fluorite (F) + cubic (C)) (CS30-CS90) and cubic phase (C) (Sm2O3)). For CSx samples, the calculated band gap energy values obtained from the UV–vis DRS results were in between 3.0–5.1 eV and fluorite phase samples (CS10–CS30) displayed lower band gap energy values (3.04–3.07 eV) than compared to the samples in other phases. Similarly, from XPS analysis, fluorite phase samples (CS10–CS30) showed higher surface oxygen vacancy concentration than compared to samples in other phases. Catalytic activity for soot oxidation is carried out on CSx samples, and the T50 temperature is in between 480–540 °C. Fluorite phase samples (CS10 CS30) showed higher surface area, lower degree of agglomeration, lower band gap energy, higher oxygen vacancy concentration and better catalytic activity for soot oxidation. Among all the CSx samples, CS10 sample displayed highest surface area (38 m2/g), lowest degree of agglomeration (0.36), lowest band gap energy (3.04 eV), highest oxygen vacancy concentration (64%) and highest soot oxidation activity (T50 = 480 °C). The order of the soot oxidation activity of CSx samples followed the same trend of band gap energy values. © 2018 Elsevier B.V.
  • No Thumbnail Available
    Item
    Surface morphology and phase stability effect of Ceria-Hafnia (CHx) binary metal oxides on soot oxidation activity
    (Elsevier B.V., 2018) Anjana, A.P.; Prasad Dasari, H.P.; Harshini, H.; Babu, G.U.B.
    CeO2-HfO2 (CHx) binary metal oxides over whole composition range (0–100%) are synthesised using the EDTA-Citrate method and calcined at 600 °C/5 h. From XRD analysis, the sample series are classified as fluorite (F) phase for CH10-CH30, hybrid (F + M) phase for CH40-CH90 and monoclinic (M) phase for CH100 sample, respectively and the results were further confirmed using Raman spectroscopy. From SEM analysis, a clear surface morphology change is noticed for fluorite, hybrid and monoclinic phases of the CHx binary metal oxides. Further, Selected Area Electron Diffraction (SAED) analysis also confirmed the single and hybrid phases of CHx binary metal oxides. The soot oxidation for the CHx binary metal oxides displayed high catalytic activity for Fluorite phase (CH10 ? CH30) samples and a decrease in catalytic activity is noticed for the Hybrid phase (CH40 ? CH90) samples. The change in catalytic activity coincides with the change in the surface morphology and phase change for the CHx binary metal oxides. Among the Fluorite phase samples, CH10 sample displayed the highest catalytic activity (T50 = 430 °C) with higher surface area (29 m2/g), lower particle size (26 nm), lower degree of agglomeration (? = 2.8) higher surface oxygen concentration (44%). Isothermal-Time-on-stream (ITOS) analysis also showed that the CH10 sample can achieve T50 in a shorter time than compared to other CHx binary metal oxides. Surface morphology and phase stability can also play as key descriptors in screening CHx binary metal oxides for soot oxidation activity. © 2018 Elsevier B.V.
  • No Thumbnail Available
    Item
    The catalytic effect of chromium-doped ceria-praseodymium on soot oxidation activity and its kinetics
    (Springer, 2024) Patil, S.S.; Prasad Dasari, H.P.
    Soot generated from the partial combustion of diesel significantly contributes to air pollution, and catalytic oxidation is currently an effective method for removing diesel soot particles. The chromium-doped ceria-praseodymium (Cr-CP) catalyst system is synthesized via solution combustion synthesis and evaluated for soot oxidation activity, with a subsequent kinetics study conducted. The XRD analysis of the catalysts indicated a decrease in crystallite size and increased lattice strain and reactive facet ratios for all Cr-doped CP samples. Raman analysis verified the existence of oxygen vacancy peaks in all chromium-doped CP catalysts. X-ray photoelectron spectroscopy (XPS) revealed the presence of adsorbed H2O or molecular water peaks in the O1s spectra for the 5 Cr-CP catalyst, which also exhibited a high concentration of surface Cr3+ ions. Thermogravimetric analysis (TGA) of soot oxidation indicated that 5 Cr-CP exhibited a superior T50 of 393 ± 2 °C, mostly attributed to the presence of reducible surface Cr3+ ion species. Kinetic analysis was performed on all Cr-doped CP catalysts to assess the kinetic triplets: activation energy, pre-exponential factor, and reaction model. The activation energy was low (87 kJ mol−1, Ozawa method) for 15 Cr-CP, while the pre-exponential factor was higher for 5 Cr-CP (7.39 × 1010 min−1). The Cr-CP catalyst system adhered to a power law, indicating a phase boundary-controlled reaction characterized by nucleation and growth mechanisms. The consistency between experimental and calculated curves confirmed that the developed catalysts adhered to the Avrami-Erofeev equation (Am) or the nucleation and growth model. Graphical Abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.
  • No Thumbnail Available
    Item
    Ceria-Terbium-based electrospun nanofiber catalysts for soot oxidation activity and its kinetics
    (Taiwan Institute of Chemical Engineers, 2024) Patil, S.S.; Kumar, R.; Prasad Dasari, H.P.
    Background: Ceria-based materials have an excellent potential to be catalysts for catalytic three-way converters in the automobile industry. Developing Ceria-based nanofiber catalysts can be a significant approach for further exploring the application of these materials in automobile industries. Methods: In this study, Ag, Cu, or Co doped Ceria–Terbium nanofibers were synthesized using the electrospinning technique. The obtained nanofiber catalysts were characterized using FE-SEM, XRD, FT-Raman Spectroscopy, and BET-BJH analysis and tested for soot oxidation activity and its kinetics. Significant findings: FE-SEM examination reveals that the obtained nanofibers have a diameter ranging from around 100 to 600 nm. CeTbCo nanofibers exhibited a reduced particle size and enhanced pore formation. The XRD investigation revealed that all the nanofibers displayed a face-centered fluorite structure of CeO2. In Raman spectroscopy analysis, CeTbCo nanofibes showed the emergence of a secondary Co3O4 phase. The CeTbCo nanofiber catalyst showed better SBET (specific surface area) (66 m2/g) and average pore size (12.08 nm) and total pore volume (0.223 cc/g)), better soot oxidation activity (T50 = 347 ℃) than other nanofiber catalysts. The CeTbCo nanofiber catalyst exhibited an activation energy of 132 kJ mol−1 and a pre-exponential factor (ln (A)) of 25.63 min−1. © 2024 Taiwan Institute of Chemical Engineers
  • No Thumbnail Available
    Item
    Soot oxidation activity and kinetics of Ce0.9M0.1O2-δ (M = Cs, Mg, Ca) catalysts: Impact of Cs doping in ceria and impact of nanorods on catalytic activity
    (Institution of Chemical Engineers, 2024) Nayak, A.S.; Patil, S.S.; Prasad Dasari, H.P.; Telaginatot, D.; Rynjah, M.; Cheruku, S.
    Solution combustion method is used to synthesize Ce0.9M0.1O2-δ (M = Cs, Mg, Ca) catalysts and calcined at 600 °C/5 h. XRD and Raman Spectroscopy Analyses the chemical structure, the phases observed, and the oxygen defects in the synthesized catalysts. A cubic fluorite structure of CeO2 has been noticed for all the catalysts from XRD and Raman Spectroscopy analyses. FE-SEM micrographs are used to analyze the morphology of the Ce0.9M0.1O2-δ (M = Cs, Mg, Ca) catalysts. Ce0.9Cs0.1O2-δ catalyst shows the presence of nanorods (diameter: 63 nm), which are not seen in the other catalysts. The redox and surface properties of the synthesized catalysts are tested by H2-Temperature Programmed Reduction (H2-TPR) and O2-Temperature Programmed Desorption (O2-TPD), respectively. The Ce0.9Cs0.1O2-δ catalyst shows the greatest degree of reducibility from TPR studies and for the Ce0.9Cs0.1O2-δ catalyst, the oxygen species evolved from the O2-TPD studies are also the highest. Thermogravimetric Analysis (TGA) has been used to carry the soot oxidation activity of the developed catalysts. Soot oxidation kinetic studies have been conducted at different heating rates (5, 10, and 15 °C/min) for the catalysts. The kinetic triplets for the developed catalysts have been obtained, and rate plots ([Formula presented] vs. temperature) and Arrhenius plots (ln(k) vs. [Formula presented]) have been developed for the catalysts. From the soot oxidation and kinetic studies for the developed catalysts, Ce0.9Cs0.1O2-δ shows better soot oxidation activity (T50 = 372 °C) than the other two catalysts, while Ce0.9Mg0.1O2-δ (T50 = 556 °C) shows the lowest soot oxidation activity. All the catalysts follow a non-integral exponential model for soot oxidation, and the Ce0.9Cs0.1O2-δ catalyst has the lowest activation energy. © 2024 Institution of Chemical Engineers
  • No Thumbnail Available
    Item
    Soot Oxidation Kinetics on Nickel Oxide: Effects of Various Synthesis Techniques
    (Pleiades Publishing, 2024) Patil, S.S.; Prasad Dasari, H.P.; Gouramma, P.; Harshini, H.
    Abstract: Nickel oxide (NiO) nanoparticles were synthesized using four different methods: microwave co-precipitation (MCP), solution combustion synthesis (SCS), direct nitrate calcination (DNC), and the sol-gel process (SGP), incorporating organic additives such as glucose and fructose. X-ray diffraction and Raman spectroscopy analyses revealed that the NiO nanoparticles formed a face-centered cubic phase characterized by Ni–O bond stretching. The SCS method produced NiO nanoparticles with higher lattice strain, smaller crystallite size, and an increased facet ratio ({110}) compared to the other methods. Transmission electron microscopy indicated that the order of nano-agglomeration size for the NiO nanoparticles was DNC > MCP > SGP > SCS. The NiO nanoparticles synthesized via SCS, SGP and MCP exhibited irregular hexagonal shapes. Among the synthesized nanoparticles, those produced by the SCS method demonstrated the highest catalytic activity (T50 = 478°C), followed by DNC (T50 = 492°C), MCP (T50 = 495°C), and SGP (T50 = 538°C). A kinetic study was conducted to evaluate key parameters, including activation energy, preexponential factor, and reaction model. The experimental curves of soot conversion were compared with theoretical curves derived from the evaluated kinetic parameters. The NiO nanoparticles synthesized via SCS exhibited the highest kinetic activity with the enhanced reaction rate at lower temperatures. © Pleiades Publishing, Ltd. 2024.