Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Prakash, O.Subject: search.filters.subject.High-entropy alloys

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Emerging processing routes
    (De Gruyter, 2023) Prakash, O.; Kumar, R.; Tapas, V.; Kumar, A.; Naveen, B.
    High-entropy alloys (HEAs) are produced using a number of processing techniques. HEAs have been produced in a variety of materials, including films, dense solid castings, and powder metallurgy components. The three types of processing routes-melting and casting, powder metallurgy, and deposition techniques-can be broadly divided into three classes. In order to create HEAs in the form of rods, bars, and ribbons, melting and casting procedures have been used, along with equilibrium and nonequilibrium cooling rates. The vacuum arc melting, vacuum induction melting, and melt spinning processes are the most widely used melt processing methods. The primary solid-state processing method to create sintered goods has been mechanical alloying (MA), followed by sintering. The surface modification methods utilized to create both thin films and thick layers of HEAs on various substrates include plasma nitriding, cladding, and sputtering. This chapter provides a brief overview of the various synthesis and processing methods used to create HEAs. The processing pathways for equiatomic and nonequiatomic HEAs are comparable. © 2023 Walter de Gruyter GmbH, Berlin/Boston. All rights reserved.
  • No Thumbnail Available
    Item
    Phase Evolution of Novel MoNbSiTiW Refractory High-Entropy Alloy Prepared by Mechanical Alloying
    (Springer, 2022) Prakash, O.; Chandrakar, R.; Chandraker, S.; Rao, K.R.; Kumar, R.; Kumar, A.; Dubey, V.
    Refractory high-entropy alloys (RHEAs) are new types of material that have been developed for high-temperature applications. RHEAs should have enhanced high-temperature strength while maintaining a sufficient level of room-temperature toughness. The phase evolution of novel MoNbSiTiW RHEAs was investigated after mechanical alloying (MA) for 35 h. X-ray diffraction (XRD) was used to analyze the phase evolution, and analysis of particle morphologies was done using a scanning electron microscope (SEM) equipped with energy dispersive spectroscopy (EDS). XRD results indicate that NbMoSiTiW RHEAs with up to 10 h of mechanical alloying have a stable solid solution phase with body centered cubic (BCC) structure. Further milling of NbMoSiTiW RHEAs promotes the evolution of intermetallic compounds until 35 h of mechanical alloying. The Williamson-Hall process was incorporated for crystalline size and lattice strain measurement and the results show that, after 35 h of mechanical alloying, the crystalline size decreased from 298 nm to 25 nm, and an enhancement in lattice strain was observed from 0.1% to 0.65%. © 2022, The Minerals, Metals & Materials Society.
  • No Thumbnail Available
    Item
    Laser cladding technology for high entropy alloys: effect and applications
    (Institute of Physics, 2024) Prakash, O.; Chandrakar, R.; Martin, L.; Verma, J.; Kumar, A.; Jaiswal, A.
    A multi-component category of an alloy containing very specific properties revolutionized the area of material science and the present engineering era. Laser cladding, a technique for surface coating, enhances surface quality and modifies properties using advanced coating technologies. In current trends, Laser cladding is mainly used in equipment and machine parts for enhancing surface properties, repairing damaged parts and surface coating caused by its advantages such as small heat-affected zone, low substrate damage, low dilution rate and exceptional metallurgical material bonding among coating and used substrate. Laser cladding improves substrates’ mechanical and various functional-specific properties, ensuring a high-quality balance between mechanical and surface attributes. The research society was able to investigate laser-cladding HEAs coatings because of the superior attributes of HEAs compared to ordinary alloys. This paper reviews current developments in laser-cladding HEAs coatings and the application of laser-cladding technology to HEAs materials. The laser cladding high-entropy alloy coatings have potential applications in corrosion, wear, and oxidation resistance, as well as their respective substrates. Cladded coatings composed of HEAs materials are measured to have shown potential applications in recent technology, opening exciting possibilities for the future. The study also discusses current trends and future prospects. © 2024 The Author(s). Published by IOP Publishing Ltd.