Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item A comprehensive review of friction stir techniques in structural materials and alloys: challenges and trends(Elsevier Editora Ltda, 2022) Prabhakar, D.A.P.; Shettigar, A.; Herbert, M.A.; Gowdru Chandrashekarappa, M.; Pimenov, D.Y.; Giasin, K.; Prakash, C.Friction-stir techniques are the potential alternative to fusion-based systems for processing and welding metallic alloys and other materials. This review explores the advantages, applications, limitations, and future directions of seven friction-based techniques namely, Additive Friction Stir Deposition (AFSD), Friction Stir Additive Manufacturing (FSAM), Friction Stir Welding (FSW), Friction Stir Processing (FSP), Friction Surfacing (FS), Friction Stir Spot Welding (FSSW), and Friction Stir Lap Welding (FSLW). The basic underlying principle of these processes uses friction as a thermal energy source to weld/process/deposit materials. The common control parameters of all friction stir processing techniques are axial force, rotational speed, and weld or traverse speed. In addition, tool profiles and tool dimensions are known to influence the weld quality. The tool's rotational speed and axial force generate friction between the workpiece and tool material interface, which could plasticize the material. The additive powder bed friction stir process (APBFSP) is another new solid-state manufacturing technique that focus on fabricating the polymer matrix nanocomposites (PNC). In this, a hollow tool like AFSD and the fundamental principle of FSP are combined. The said parameters affect the quantity of material getting deposited/welded. However, weld speed/traverse speed alters the weld quality, and higher traverse speed results in porosity and voids in the welded/deposited/processed region. The only difference between AFSD and other friction stir techniques (FSTs) is that in the AFSD technique, the hollow rotating tool comprises two protrusions with different tool profiles (cylindrical, threaded cylindrical, and tapered cylindrical, square) used. Threaded cylindrical profile and tool steel as the tool material is the most commonly employed in FSTs. Apart from that, tungsten carbide is preferred for hard materials. The working principles and process parameters of FSTs that affect the part quality are discussed in detail. The above review gives the reader an understanding of the domain of FSTs that can be researched further. A summary of some of the potential research works with objectives, process parameters, and outcomes is highlighted. This will provide the readers with an overview of the work carried out by researchers across the globe. Finally, the potential research gaps for future directions to be explored soon across the globe are outlined. © 2022 The Author(s).Item Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy(Springer, 2021) Pramanik, A.; Basak, A.K.; Prakash, C.; Shankar, S.; Sharma, S.; Narendranath, S.Titanium alloys, in particularly Ti-6Al-4V alloy is used enormously in many high-tech sectors specially in aerospace industries due to its superior properties. Machining process (for example wire electrical discharge machining) to reshape this alloy affects the integrity of the newly generated surfaces. This experimental study has identified three affected layers using scanning electron microscopy on the cross section of the machined titanium (Ti-6Al-4V) alloy surface generated from wire electrical discharge machining (WEDM). This study also explained the formation mechanism of those three layers as no detail investigation is available in this area so far. It was found that the top flaky layers are formed due to the highest cooling rate at the outermost surface, which is induced due to the low thermal conductivity of the titanium alloy as well as the quenching effect because of the existence of dielectric. The recast layer is formed at a cooling rate lower than that at the outer surface, where the melted material is resolidified very quickly without having any grain boundaries. The heat-affected zone appears at a slightly different color, which does not melt but experience heat treatment during the machining process. © 2021, ASM International.