Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Microstructure evolution and mechanical properties of friction stir welded AA6061/rutile composite(Institute of Physics Publishing helen.craven@iop.org, 2019) Prabhu B, S.R.; Shettigar, A.K.; Herbert, M.A.; Rao, S.S.Present study explores the Friction stir welding (FSW) of rutile reinforced AA6061matrix composite using various combination of tool traverse speeds (60, 75 and 90 mm min-1), rotational speeds (750, 1000 and 1250 rpm) and tool pin profiles (Threaded cylindrical and Square profiled pin). FSW process variables have significant impact in controlling the mechanical properties of the joint by limiting the welding defects. It has been inferred from the study that tool rotational speed and tool traverse speed majorly affects the microstructure, joint quality, hardness and joint strength. The weld area showed the presence of four distinct regions usually found in FSW of aluminium matrix composites. The weld region exhibited fine equiaxed grains and uniformly distributed tiny reinforced rutile particles. Tool having square profiled pin shows improved joint properties in comparison with tool having threaded cylindrical pin. © 2019 IOP Publishing Ltd.Item Experimental assessment of FSW process to join AA6061/Rutile composite and parametric optimization using TGRA(IOP Publishing Ltd, 2021) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.Present study is focused on investigating the effect of various friction stir welding (FSW) process variables on AA6061/Rutile composites welding quality. FSWof composites was performed considering tool geometry (Tg), welding speed (Ws) and rotational speed (Ns) as ideal parameters for multi-response optimization. Experiments were designed based on the L9 orthogonal array. Analysis of variance (ANOVA) was utilized to evaluate the effects of these welding process variables on output responses namely hardness and ultimate tensile strength (UTS). Main effects plots were drawn to found out the optimal levels of these process parameters. Multi-response optimization of the welding process has been performed using Taguchi's grey relational analysis (TGRA). Analysis revealed that welding speed of 90mmmin-1, a tool with a square pin, and rotational speed of 1000 rpm produced an FSWjoint with excellent mechanical properties. Microstructure analysis revealed that refinement in the grain structure and redistribution of reinforced particles helped in improved joint strength. © 2021 IOP Publishing Ltd.Item Parameter investigation and optimization of friction stir welded AA6061/TiO2 composites through TLBO(Springer Science and Business Media Deutschland GmbH, 2022) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.This paper explicates the joining of AA 6061/TiO2 composites by the friction stir welding (FSW) process. FSW experiments were conducted as per the three factors, three-level, central composite ivy– face-centered design method. Mathematical relationships between the FSW process parameters, namely tool geometry, welding speed, and tool rotational speed, and the output responses such as hardness, yield strength, and ultimate tensile strength were established using response surface methodology. Adequacies of established models were assessed through the analysis of variance method. Further, the paper elucidates the application of the teaching–learning-based optimization (TLBO) algorithm to identify the optimal values of input variables and to obtain an FSW joint with superior mechanical properties. The optimized experimental condition obtained from the TLBO yields an FSW joint with a UTS of 174 MPa, yield strength of 120 MPa, and hardness of 126HV. The study revealed that the result of the TLBO algorithm matched the findings of the FSW experiments. © 2021, The Author(s).Item Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique(Sharif University of Technology, 2022) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.In the friction stir welding process, preferred joint property is vastly reliant on the selection of optimal welding conditions. The present study aims to use the Taguchi technique to find the optimal process conditions for achieving superior Ultimate Tensile Strength (UTS) in friction stir welded Aluminum Matrix Composite (AMC) joints. AMCs reinforced with rutile particles which have a potential application in the aerospace, automotive, and marine industries are used in the present work. Taguchi parametric design technique was used to identify the effect of rotational speed, tool traverse speed, and tool geometry on joint strength. Taguchi approach confined the optimum level of process variables and these variables were optimized. The investigation showed that the parameters within the selected value range will seriously affect the output. The predicted value of the output response was 155.48 MPa, which was validated by further experiments using the optimum process variables. Analysis Of Variance (ANOVA) results indicated that the UTS of the composite joint is mainly affected by the tool traverse speed followed by rotational speed, and tool geometry. The microstructural study unveiled that grain size is dependent on process variables and finer grains offer better joint properties. © 2022 Sharif University of Technology. All rights reserved.