Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 3 of 3
  • Item
    Ultra-sensitive clogging free combustible molecular precursor-based screen-printed ZnO sensors: a detection of ammonia and formaldehyde breath markers
    (Springer, 2021) Manjunath, G.; Pothukanuri, P.; Mandal, S.
    It is beneficial to develop the cost-effective, ultra-sensitive ZnO-based sensor for the rapid detection and quantification of the ammonia and formaldehyde breath markers under ambient conditions. Here, one-step solution route was adopted to formulate the aqueous combustible molecular precursor-based clogging free screen-printing ink consisting of zinc nitrate as an oxidizer, glycine as fuel, and eco-friendly binder sodium carboxymethylcellulose. The formulated precursor was deposited on the glass substrates via a screen-printing technique followed by annealing at different temperatures for an hour. Screen printed ZnO sensors processed at 500 °C with high crystallinity, less lattice distortion, low optical bandgap, and high concentration of donor defects showed remarkably high NH3 gas response ~ 336 and a moderate HCHO response ~ 16.4 towards the 5 ppm and 10 ppm of the respective gases. In addition it's LOD values is drawn as 0.6 ppm and 2.9 ppm for NH3 and HCHO gases, respectively, and exhibits superior selectivity towards ammonia. Faster diffusion of oxygen vacancies (Vo) in the smaller crystallites resulted expeditious sensor kinetics in the screen-printed sensor processed at 400 °C. Response and recovery time were recorded to be 50 s and 50 s to the 5 ppm of NH3, respectively. The crystallinity-dominant domain overcomes the adverse effect of larger grains on the gas response of screen-printed ZnO sensor processed at 500 °C. Robust, scalable, and cost-effective screen-printed ZnO conductometric sensors demonstrated here has a potential application in clinical diagnosis, and also in monitoring the NH3 and HCHO gases at low ppm-level. © 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC part of Springer Nature.
  • Item
    Ammonia gas detection by solution combustion-processed pristine & Ti-doped ZnO transparent films: a reverse effect of doping on gas response
    (Springer, 2023) Vardhan, R.V.; Manjunath, G.; Pothukanuri, P.; Mandal, S.
    In this contribution, pure, polycrystalline wurtzite crystal structured, spin-coated pristine ZnO and Ti-doped (1, 2, and 3 wt%) ZnO transparent films were accomplished at 400 °C through a facile solution combustion synthesis method. Crystallinity, roughness, and porosity in the pristine film were relatively higher than in the doped films. The demonstrated films were transparent, with ~ 70 to 90% in the visible region. The room temperature detection of ammonia (NH3) gas (25–100 ppm) was recognized in all the films. The pristine film revealed a superior gas response at every concentration of NH3 gas in contrast to all the doped films; it is probably due to comparatively high crystallinity, porosity, more oxygen vacancy concentration (1.788), and high fraction of adsorbed oxygen (20.55%). The film exhibited the highest gas response of 34.7 at 100 ppm of NH3 gas and a limit of detection of ~ 10.7 ppm with superior selectivity towards NH3 gas. Although doping enhanced the transparency but diminished the NH3 gas response due to the combined effect of deterioration in the mentioned properties achieved in pristine film. © 2023, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.
  • Item
    Tracing of Ammonia Gas by Solution-Combustion-Derived Pristine and Nb-Doped TiO2 Films: Beneficial Impact of Crystallinity and Adsorbed Oxygen on the Gas Response
    (Springer, 2023) Vardhan, R.V.; Manjunath, G.; Pothukanuri, P.; Mandal, S.
    The current work delivers room-temperature ammonia (NH3) gas-detectable pristine, Nb-doped TiO2 air- and vacuum-annealed films obtained through the solution-combustion process. Polycrystalline anatase crystal structured films without any dopant oxide phases were processed at 400°C on glass substrates. The crystallinity was higher in pristine films than in doped films; the morphological features were similar in all the films. The films were > 50% transparent, and the estimated optical energy band gap was greater in doped films than in pristine films. All the films detected NH3 gas (25 ppm to 100 ppm) at room temperature, and the gas response was highly dependent on the crystallinity and relative area fraction of adsorbed oxygen (% of OA). The vacuum-annealed pristine film exhibited a better gas response than the other films at all NH3 gas concentrations due to high crystallinity and % of OA (10.15%). The film demonstrated maximum gas response of ~16 towards 100 ppm of NH3 gas and displayed good selectivity. Even though the doping reduced the crystallite size from ~17 nm to ~9 nm, it also diminished the crystallinity of the films, which significantly impacted the deterioration of their gas response. © 2023, The Minerals, Metals & Materials Society.