Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Pimenov, D.Y.Has files: No

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    A comprehensive review of friction stir techniques in structural materials and alloys: challenges and trends
    (Elsevier Editora Ltda, 2022) Prabhakar, D.A.P.; Shettigar, A.; Herbert, M.A.; Gowdru Chandrashekarappa, M.; Pimenov, D.Y.; Giasin, K.; Prakash, C.
    Friction-stir techniques are the potential alternative to fusion-based systems for processing and welding metallic alloys and other materials. This review explores the advantages, applications, limitations, and future directions of seven friction-based techniques namely, Additive Friction Stir Deposition (AFSD), Friction Stir Additive Manufacturing (FSAM), Friction Stir Welding (FSW), Friction Stir Processing (FSP), Friction Surfacing (FS), Friction Stir Spot Welding (FSSW), and Friction Stir Lap Welding (FSLW). The basic underlying principle of these processes uses friction as a thermal energy source to weld/process/deposit materials. The common control parameters of all friction stir processing techniques are axial force, rotational speed, and weld or traverse speed. In addition, tool profiles and tool dimensions are known to influence the weld quality. The tool's rotational speed and axial force generate friction between the workpiece and tool material interface, which could plasticize the material. The additive powder bed friction stir process (APBFSP) is another new solid-state manufacturing technique that focus on fabricating the polymer matrix nanocomposites (PNC). In this, a hollow tool like AFSD and the fundamental principle of FSP are combined. The said parameters affect the quantity of material getting deposited/welded. However, weld speed/traverse speed alters the weld quality, and higher traverse speed results in porosity and voids in the welded/deposited/processed region. The only difference between AFSD and other friction stir techniques (FSTs) is that in the AFSD technique, the hollow rotating tool comprises two protrusions with different tool profiles (cylindrical, threaded cylindrical, and tapered cylindrical, square) used. Threaded cylindrical profile and tool steel as the tool material is the most commonly employed in FSTs. Apart from that, tungsten carbide is preferred for hard materials. The working principles and process parameters of FSTs that affect the part quality are discussed in detail. The above review gives the reader an understanding of the domain of FSTs that can be researched further. A summary of some of the potential research works with objectives, process parameters, and outcomes is highlighted. This will provide the readers with an overview of the work carried out by researchers across the globe. Finally, the potential research gaps for future directions to be explored soon across the globe are outlined. © 2022 The Author(s).
  • No Thumbnail Available
    Item
    A Review of Optimization and Measurement Techniques of the Friction Stir Welding (FSW) Process
    (Multidisciplinary Digital Publishing Institute (MDPI), 2023) Prabhakar, D.A.P.; Korgal, A.; Shettigar, A.K.; Herbert, M.A.; Gowdru Chandrashekarappa, M.P.G.; Pimenov, D.Y.; Giasin, K.
    This review reports on the influencing parameters on the joining parts quality of tools and techniques applied for conducting process analysis and optimizing the friction stir welding process (FSW). The important FSW parameters affecting the joint quality are the rotational speed, tilt angle, traverse speed, axial force, and tool profile geometry. Data were collected corresponding to different processing materials and their process outcomes were analyzed using different experimental techniques. The optimization techniques were analyzed, highlighting their potential advantages and limitations. Process measurement techniques enable feedback collection during the process using sensors (force, torque, power, and temperature data) integrated with FSW machines. The use of signal processing coupled with artificial intelligence and machine learning algorithms produced better weld quality was discussed. © 2023 by the authors.
  • No Thumbnail Available
    Item
    Effect of cryogenic grinding on fatigue life of additively manufactured maraging steel
    (MDPI AG, 2021) Balan, A.S.S.; Kannan, C.; Kumar, A.V.; Hariharan, H.; Pimenov, D.Y.; Giasin, K.; Nadolny, K.
    Additive manufacturing (AM) is replacing conventional manufacturing techniques due to its ability to manufacture complex structures with near?net shape and reduced material wastage. However, the poor surface integrity of the AM parts deteriorates the service life of the components. The AM parts should be subjected to post?processing treatment for improving surface integrity and fatigue life. In this research, maraging steel is printed using direct metal laser sintering (DMLS) process and the influence of grinding on the fatigue life of this additively manufactured material was investigated. For this purpose, the grinding experiments were performed under two different grinding environments such as dry and cryogenic conditions using a cubic boron nitride (CBN) grinding wheel. The results revealed that surface roughness could be reduced by about 87% under cryogenic condition over dry grinding. The fatigue tests carried out on the additive manufactured materials exposed a substantial increase of about 170% in their fatigue life when subjected to cryogenic grinding. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.