Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Hydrodynamic analysis of floating tunnel with submerged rubble mound breakwater(Elsevier Ltd, 2022) Patil, S.B.; Karmakar, D.The wave interaction with a Submerged Floating Tunnel (SFT) of two different shapes (rectangular and circular) in the presence of a submerged rubble mound breakwater (SRMB) is analyzed using Multi-Domain Boundary Element Method (MDBEM). Furthermore, three typical SFT cross-sections (rectangular, trapezoidal, and circular) of equal area and structural height in the presence of SRMB under similar operating conditions are investigated as comparative study to analyse the influence of SFT shape on hydrodynamic performance. The performance of the tunnel configurations is analyzed as a (a) measurement in terms of hydrodynamic efficiency and (b) criterion for tunnel structure safety. In both shallow and intermediate water depth regions, the critical wave number and the critical angle of incidence followed by resonant wave reflection are identified, and suitable structural parameters of SRMB such as structural porosity in the armour layer, relative crest width, relative gap width between the SFT and the SRMB, structural width and position (relative draft of tunnel structure measured from the free water surface) of SFT are investigated. The present parametric investigation of SFT with SRMB reveals an improved wave transformation properties for a specific range of water depth. The coupling of SRMB has resulted not only in a reduction of wave-induced force acting on SFTs, but also in improved performance in wave transformation characteristics as a coastal protection structure, which is substantially determined by SRMB structural properties. Due to the presence of SRMB, the SFT's safety is improved, which may also add stability to the SFT. A comparative study of different distinct cross-sections of SFTs indicates that, due to its shape, the circular SFT has a reduced reflection capability and lower wave-induced force with nearly the same wave transmission as the rectangular and trapezoidal SFT. The study performed on the coupled SFT and rubble mound breakwater may be useful in determining the suitability of breakwaters not only for maintaining shore dynamics but also for protecting important floating structures for underwater transit. © 2022 Elsevier LtdItem Hydrodynamic Performance of Fixed Floating Structures Coupled with Submerged Breakwaters Using the Multidomain Boundary Element Method(American Society of Civil Engineers (ASCE), 2023) Patil, S.B.; Karmakar, D.The hydrodynamic characteristics of fixed floating structure (FFSs) of various configurations, such as rectangular fixed floating structures and trapezoidal fixed floating structures coupled with submerged breakwaters of two different shapes, namely, rectangular breakwater and trapezoidal breakwater, are investigated using the multidomain boundary element method under the framework of small-amplitude wave theory. The hydrodynamic analysis of the FFS with and without the presence of submerged breakwater is performed for the variation in physical parameters such as a change in structural parameters of the submerged breakwater (shape, relative submergence depth, relative crest width, and structural porosity), structural parameters of FFS (shape and structural width), wave parameter (angle of incidence), and relative spacing between the FFS and submerged breakwater. The study demonstrates, for a given range of incident wave angles, periodic values of the distance between the submerged breakwater and the FFS and optimal shape combinations for which the coupled structures act effectively in attenuating wave force acting on the FFS and optimizing wave transformations. In addition, to enhance the hydrodynamic performance, the presence of reef structures in front of the FFS is associated, which results in Bragg's resonance with a phase shift in peaks of wave reflection and transmission coefficient caused by changing the structural porosity of the submerged breakwater, indicating that the proposed models are more flexible, allowing demand-based control over shore dynamics and coastal management. The study will be useful for coastal management and safeguarding floating structures by selecting various forms and combinations of coupled FFSs with submerged porous breakwaters. © 2023 American Society of Civil Engineers.Item Hydrodynamic performance of wave energy converter integrated with pile restrained floating structure near a partially reflecting seawall(Elsevier Ltd, 2023) Patil, S.B.; Karmakar, D.The integration of a Wave Energy Converter (WEC) with a Pile-Restrained Rectangular Floating Breakwater (PRFB) in the presence of a partially reflecting vertical seawall is analysed to enhance the hydrodynamic performance and WEC efficiency of the integrated breakwater-WEC device based on small amplitude wave theory using the Boundary Element Method (BEM). The rectangular floating breakwater is designed to have heave motion with a pile-restrained floating structure placed in a position to attenuate the incoming wave in the transmitted region and the linear power take-off (PTO) damping is employed to calculate the absorbed power. The study is performed to understand the effectiveness of wave energy conversion and its hydrodynamic performance due to changes in the seawall's porosity, relative structural width, relative structural draft, wave energy conversion power take-off damping coefficients, and the relative gap of the WEC integrated with PRFB from the seawall. The study demonstrated that in the presence of a fully reflecting seawall, the wave energy extraction is enhanced for the integrated WEC system without compromising the defined threshold wave reflection coefficient but at the expense of a constrained range of wavenumbers that correspond near the system's fundamental natural frequency. Moreover, the capture width ratio is noted to be higher for relatively smaller structural drafts, while the wave reflection coefficient shows precisely the reverse trend. However, under such circumstances, the integrated WEC system operates as a motion-trapping structure, especially when the reflection coefficient of the seawall, CR≥0.75. Thus, the present study will assist the designer in determining the appropriate degrees of efficiency of the WEC device without sacrificing hydrodynamic performance by fine-tuning the hybrid floating breakwater system's geometrical parameters. © 2023 Elsevier Ltd