Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Performance evaluation of submerged breakwater using Multi-Domain Boundary Element Method(Elsevier Ltd, 2021) Patil, S.B.; Karmakar, D.The gravity wave interaction with submerged breakwater of different structural configurations are investigated based on the small-amplitude wave theory. The boundary value problem is analysed in two-dimension using the linearized wave theory in water of finite depth. The submerged breakwater structural configuration such as (i) thin-walled type (impermeable), (ii) rectangular type (impermeable and permeable), (iii) triangular type (impermeable, permeable, perforated), (iv) trapezoidal type (impermeable, permeable, perforated) and (v) Tandem type (impermeable, permeable, perforated) are considered to analyse and performance of the breakwater. The numerical model is developed using the Multi-Domain Boundary Element Method (MDBEM) to analyse the hydrodynamic scattering coefficient (such as reflection, transmission and dissipation coefficient) for the change of physical parameters such as relative spacing between the breakwaters, relative water depth and structural dimensions. The convergence of the present numerical model is performed for the specific case of tandem breakwater and numerical computation is validated with the results available in the literature. The wave reflection and transmission coefficient along with wave force on the structure is analysed for different shapes, structural parameters and geometrical parameters of the breakwater to maximize the efficiency of breakwater. In the case of permeable breakwater, the submerged tandem breakwater is found to be more efficient in wave transformation as compared to rectangular, triangular and trapezoidal permeable submerged breakwaters. The comparative analysis performed on different configurations of the breakwater in the present study will be helpful in the effective design of the breakwater near the harbour regions. © 2021 Elsevier LtdItem Hydrodynamic analysis of floating tunnel with submerged rubble mound breakwater(Elsevier Ltd, 2022) Patil, S.B.; Karmakar, D.The wave interaction with a Submerged Floating Tunnel (SFT) of two different shapes (rectangular and circular) in the presence of a submerged rubble mound breakwater (SRMB) is analyzed using Multi-Domain Boundary Element Method (MDBEM). Furthermore, three typical SFT cross-sections (rectangular, trapezoidal, and circular) of equal area and structural height in the presence of SRMB under similar operating conditions are investigated as comparative study to analyse the influence of SFT shape on hydrodynamic performance. The performance of the tunnel configurations is analyzed as a (a) measurement in terms of hydrodynamic efficiency and (b) criterion for tunnel structure safety. In both shallow and intermediate water depth regions, the critical wave number and the critical angle of incidence followed by resonant wave reflection are identified, and suitable structural parameters of SRMB such as structural porosity in the armour layer, relative crest width, relative gap width between the SFT and the SRMB, structural width and position (relative draft of tunnel structure measured from the free water surface) of SFT are investigated. The present parametric investigation of SFT with SRMB reveals an improved wave transformation properties for a specific range of water depth. The coupling of SRMB has resulted not only in a reduction of wave-induced force acting on SFTs, but also in improved performance in wave transformation characteristics as a coastal protection structure, which is substantially determined by SRMB structural properties. Due to the presence of SRMB, the SFT's safety is improved, which may also add stability to the SFT. A comparative study of different distinct cross-sections of SFTs indicates that, due to its shape, the circular SFT has a reduced reflection capability and lower wave-induced force with nearly the same wave transmission as the rectangular and trapezoidal SFT. The study performed on the coupled SFT and rubble mound breakwater may be useful in determining the suitability of breakwaters not only for maintaining shore dynamics but also for protecting important floating structures for underwater transit. © 2022 Elsevier LtdItem Hydrodynamic performance of submerged breakwater in tandem with thin-walled as submerged reef structure(SAGE Publications Ltd, 2023) Patil, S.B.; Karmakar, D.The interaction of gravity waves with submerged tandem breakwater of different structural configurations is analysed in finite water depth using the Multi-Domain Boundary Element Method (MDBEM). The wave transformation characteristics, wave forces and wave energy dissipation are analysed considering the presence of impermeable type thin-walled as reef structure in front of the primary submerged breakwater. The comparative study is performed for the submerged structures of various shapes (trapezoidal, triangular, rectangular and thin-walled) and types (rubble mound, permeable, impermeable) that are designed to function together as a tandem breakwater. The effect of varying angle of incidence, relative submergence depth, and relative gap between the reef structure and primary breakwater on wave reflection and transmission are derived for the suggested tandem breakwater models. Among all the impermeable-type models, the thin-walled as reef structure designed at a distance in front of thin-walled as a primary submerged breakwater as a tandem is observed to perform efficiently in terms of energy dissipation and also offers an optimum wave transmission for both short and long wave conditions. Further, the permeable and rubble mound type trapezoidal tandem breakwater offers higher energy dissipation in comparison with all other breakwaters. In view of the design considerations and structural stability of submerged breakwaters, the addition of a reef structure acts as a defence system for the primary breakwater and also creates an energy dissipation zone that allows the shore dynamics to be preserved, making tandem models more effective in the harbour region. © IMechE 2022.Item Hydrodynamic Performance of Fixed Floating Structures Coupled with Submerged Breakwaters Using the Multidomain Boundary Element Method(American Society of Civil Engineers (ASCE), 2023) Patil, S.B.; Karmakar, D.The hydrodynamic characteristics of fixed floating structure (FFSs) of various configurations, such as rectangular fixed floating structures and trapezoidal fixed floating structures coupled with submerged breakwaters of two different shapes, namely, rectangular breakwater and trapezoidal breakwater, are investigated using the multidomain boundary element method under the framework of small-amplitude wave theory. The hydrodynamic analysis of the FFS with and without the presence of submerged breakwater is performed for the variation in physical parameters such as a change in structural parameters of the submerged breakwater (shape, relative submergence depth, relative crest width, and structural porosity), structural parameters of FFS (shape and structural width), wave parameter (angle of incidence), and relative spacing between the FFS and submerged breakwater. The study demonstrates, for a given range of incident wave angles, periodic values of the distance between the submerged breakwater and the FFS and optimal shape combinations for which the coupled structures act effectively in attenuating wave force acting on the FFS and optimizing wave transformations. In addition, to enhance the hydrodynamic performance, the presence of reef structures in front of the FFS is associated, which results in Bragg's resonance with a phase shift in peaks of wave reflection and transmission coefficient caused by changing the structural porosity of the submerged breakwater, indicating that the proposed models are more flexible, allowing demand-based control over shore dynamics and coastal management. The study will be useful for coastal management and safeguarding floating structures by selecting various forms and combinations of coupled FFSs with submerged porous breakwaters. © 2023 American Society of Civil Engineers.Item Hydrodynamic performance of wave energy converter integrated with pile restrained floating structure near a partially reflecting seawall(Elsevier Ltd, 2023) Patil, S.B.; Karmakar, D.The integration of a Wave Energy Converter (WEC) with a Pile-Restrained Rectangular Floating Breakwater (PRFB) in the presence of a partially reflecting vertical seawall is analysed to enhance the hydrodynamic performance and WEC efficiency of the integrated breakwater-WEC device based on small amplitude wave theory using the Boundary Element Method (BEM). The rectangular floating breakwater is designed to have heave motion with a pile-restrained floating structure placed in a position to attenuate the incoming wave in the transmitted region and the linear power take-off (PTO) damping is employed to calculate the absorbed power. The study is performed to understand the effectiveness of wave energy conversion and its hydrodynamic performance due to changes in the seawall's porosity, relative structural width, relative structural draft, wave energy conversion power take-off damping coefficients, and the relative gap of the WEC integrated with PRFB from the seawall. The study demonstrated that in the presence of a fully reflecting seawall, the wave energy extraction is enhanced for the integrated WEC system without compromising the defined threshold wave reflection coefficient but at the expense of a constrained range of wavenumbers that correspond near the system's fundamental natural frequency. Moreover, the capture width ratio is noted to be higher for relatively smaller structural drafts, while the wave reflection coefficient shows precisely the reverse trend. However, under such circumstances, the integrated WEC system operates as a motion-trapping structure, especially when the reflection coefficient of the seawall, CR≥0.75. Thus, the present study will assist the designer in determining the appropriate degrees of efficiency of the WEC device without sacrificing hydrodynamic performance by fine-tuning the hybrid floating breakwater system's geometrical parameters. © 2023 Elsevier LtdItem Hydrodynamic performance of pile restrained U-shaped OWC device using boundary element method(Elsevier Ltd, 2024) Muduli, R.; Patil, S.B.; Karmakar, D.The hydrodynamic performance of a pile-restrained U-shaped Oscillating Water Column (U-OWC) device under the action of normal incident waves is analysed using the Boundary Element Method (BEM). The hydrodynamic parameters, such as the radiation susceptance and conductance coefficients and hydrodynamic efficiency, are analysed for various cases of different structural parameters of U-OWC. It is observed that the theoretical maximum efficiency can be achieved for a wide range of wavenumbers by appropriate tweaking and optimisation of the device geometry. The resonance enables the device to reach the maximum possible efficiency and the phenomenon of obtaining the maximum efficiency of the final optimised geometry is achieved. The shorter length of draft of the device is chosen over longer draft considering the high construction cost as well as efficiency enhancement of the device, even though the longer draft is observed to perform marginally better in a narrow wave number range. The numerical investigation of the theoretical maximum efficiency is observed to be 100% whenever the μ (dimensionless radiation susceptance coefficient) crosses the zero mark. Consequently, the maximum theoretical efficiency is observed close to maximum whenever μ is close to zero. The final optimised geometry consisting of an inward inclined top wall configuration performs best but could be challenging in actual construction. Further, on inclining the bottom wall in the inwards or outward direction does not result in better performance than inclining only the top wall. The present study explores a novel concept of pile-restrained U-OWC kept near the surface and will be helpful in determining the best-performing geometry for the device. © 2023 Elsevier LtdItem Hydrodynamic performance of a hybrid floating breakwater-wave energy conversion system(SAGE Publications Ltd, 2025) Patil, S.B.; Karmakar, D.The study presents the hydrodynamic performance and wave energy conversion of a hybrid floating breakwater under the framework of small amplitude linear wave theory. The hybrid floating breakwater is composed of a partially liquid-filled rectangular-box type tank with built-in buoys connected to a Power Take-Off (PTO) (linear inductance generator) and is excited under regular wave conditions for (a) constrained roll motion, and (b) constrained surge, heave, and roll motion. The Boundary Element Method (BEM) is employed with the assumption of modest sloshing in the tank of the hybrid floating breakwater to estimate the hydrodynamic efficiency of the hybrid floating breakwater. Further, the experimental investigation on the Wave Energy Converter (WEC) capabilities and the hydrodynamic coefficients (wave reflection and transmission coefficients) are estimated for the excitation frequencies corresponding to nondimensional wavenumber. The present study reveals that the hybrid concept improves wave attenuation performance by 20%–35% compared to conventional floating breakwaters by increasing wave attenuation, damping and stabilizing the wave transmission coefficient (Formula presented) within (Formula presented). The experimental investigation shows that hybrid floating breakwater attaints its floating stability for the depth 15 – 25% of partially filled fluid for which the proposed design as floating breakwater as well as WEC system is achieved for a wide range of excitation frequencies. Furthermore, the hybrid floating breakwater functions as a barrier which is noted to be capable of significantly attenuating incoming progressive waves below the predetermined threshold values of wave attenuation characteristics, in addition to converting wave energy. © IMechE 2025. This article is distributed under the terms of the Creative Commons Attribution 4.0 License (https://creativecommons.org/licenses/by/4.0/) which permits any use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us.sagepub.com/en-us/nam/open-access-at-sage).