Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Modelling of squeeze casting process using design of experiments and response surface methodology(Maney Publishing maney@maney.co.uk, 2015) Gowdru Chandrashekarappa, M.; Krishna, P.; Parappagoudar, M.B.The present work makes an attempt to model and analyse squeeze casting process by utilising design of experiments and response surface methodology. The input–output data for developing regression models and test cases is obtained by conducting the experiments. Surface roughness, ultimate tensile strength and yield strength have been measured for different combinations of process variables, namely, squeeze pressure, pressure duration, pouring temperature and die temperature. Two non-linear regression models based on central composite design (CCD) and Box-Behnken design (BBD) of experiments have been developed to establish the input–output relationships. The effects of process variables on the measured responses have been studied using surface plots. The performances of the two non-linear models have been tested for their prediction accuracy with the help of 15 test cases. It is observed that, both CCD and BBD, the non-linear regression models are statistically adequate and capable of making accurate predictions. © 2015 W. S. Maney & Son Ltd.Item Modelling and multi-objective optimisation of squeeze casting process using regression analysis and genetic algorithm(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2016) Gowdru Chandrashekarappa, G.C.; Krishna, P.; Parappagoudar, M.B.In the present work, an attempt has been made using statistical tools to develop a non-linear regression model and to identify the significant contribution of squeeze cast process parameters on surface roughness, hardness and tensile strength. Microstructure examination performed on the squeeze cast samples has revealed that a maximum of 100 MPa pressure is good enough to eliminate all possible casting defects. Accuracy of the developed models has been tested with the help of ten test cases. It is important to note that the developed models predict responses with a reasonably good accuracy and the developed mathematical input–output relationship helps the foundry-man to make better predictions. The present work comprises four objectives, which are conflicting in nature. Hence, mathematical formulation is used to convert four objective functions into a single objective function. The popular evolutionary algorithm, that is genetic algorithm has been utilised to determine the optimal process parameters. © 2015 Engineers Australia.Item Multi-Objective Optimization of Squeeze Casting Process using Genetic Algorithm and Particle Swarm Optimization(De Gruyter Open Ltd peter.golla@degruyter.com, 2016) Gowdru Chandrashekarappa, G.C.; Krishna, P.; Vundavilli, P.R.; Parappagoudar, M.B.The near net shaped manufacturing ability of squeeze casting process requiresto set the process variable combinations at their optimal levels to obtain both aesthetic appearance and internal soundness of the cast parts. The aesthetic and internal soundness of cast parts deal with surface roughness and tensile strength those can readily put the part in service without the requirement of costly secondary manufacturing processes (like polishing, shot blasting, plating, hear treatment etc.). It is difficult to determine the levels of the process variable (that is, pressure duration, squeeze pressure, pouring temperature and die temperature) combinations for extreme values of the responses (that is, surface roughness, yield strength and ultimate tensile strength) due to conflicting requirements. In the present manuscript, three population based search and optimization methods, namely genetic algorithm (GA), particle swarm optimization (PSO) and multi-objective particle swarm optimization based on crowding distance (MOPSO-CD) methods have been used to optimize multiple outputs simultaneously. Further, validation test has been conducted for the optimal casting conditions suggested by GA, PSO and MOPSO-CD. The results showed that PSO outperformed GA with regard to computation time. © 2016 G.C.M. Patel et al., published by De Gruyter Open.Item An intelligent system for squeeze casting process—soft computing based approach(Springer London, 2016) Gowdru Chandrashekarappa, G.C.; Krishna, P.; Parappagoudar, M.B.The present work deals with the forward and reverse modelling of squeeze casting process by utilizing the neural network-based approaches. The important quality characteristics in squeeze casting, namely surface roughness and tensile strength, are significantly influenced by its process variables like pressure duration, squeeze pressure, and pouring and die temperatures. The process variables are considered as input and output to neural network in forward and reverse mapping, respectively. Forward and reverse mappings are carried out utilizing back propagation neural network and genetic algorithm neural network. For both supervised learning networks, batch training is employed using huge training data (input-output data). The input-output data required for training is generated artificially at random by varying process variables between their respective levels. Further, the developed model prediction performances are compared for 15 random test cases. Results have shown that both models are capable to make better predictions, and the models can be used by any novice user without knowing much about the mechanics of materials and the process. However, the genetic algorithm tuned neural network (GA-NN) model prediction performance is found marginally better in forward mapping, whereas BPNN produced better results in reverse mapping. © 2016, Springer-Verlag London.Item Artificial bee colony, genetic, back propagation and recurrent neural networks for developing intelligent system of turning process(Springer Nature, 2020) Shettigar, A.K.; Gowdru Chandrashekarappa, G.C.M.; Ganesh, G.R.; Vundavilli, P.R.; Parappagoudar, M.B.Intelligent manufacturing requires significant technological interventions to interface manufacturing processes with computational tools in order to dynamically mold the systems. In this era of the 4th industrial revolution, Artificial neural network (ANNs) is a modern tool equipped with a better learning capability (based on the past experience or history data) and assists in intelligent manufacturing. This research paper reports on ANNs based intelligent modelling of a turning process. The central composite design is used as a data-driven modelling tool and huge input–output is generated to train the neural networks. ANNs are trained with the data collected from the physics-based models by using back-propagation algorithm (BP), genetic algorithm (GA), artificial bee colony (ABC), and BP algorithm trained with self-feedback loop. The ANNs are trained and developed as both forward and reverse mapping models. Forward modelling aims at predicting a set of machining quality characteristics (i.e. surface roughness, cylindricity error, circularity error, and material removal rate) for the known combinations of cutting parameters (i.e. cutting speed, feed rate, depth of cut, and nose radius). Reverse modelling aims at predicting the cutting parameters for the desired machining quality characteristics. The parametric study has been conducted for all the developed neural networks (BPNN, GA-NN, RNN, ABC-NN) to optimize neural network parameters. The performance of neural network models has been tested with the help of ten test cases. The network predicted results are found in-line with the experimental values for both forward and reverse models. The neural network models namely, RNN and ABC-NN have shown better performance in forward and reverse modelling. The forward modelling results could help any novice user for off-line monitoring, that could predict the output without conducting the actual experiments. Reverse modelling prediction would help to dynamically adjust the cutting parameters in CNC machine to obtain the desired machining quality characteristics. © 2020, Springer Nature Switzerland AG.