Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Modelling and multi-objective optimisation of squeeze casting process using regression analysis and genetic algorithm(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2016) Gowdru Chandrashekarappa, G.C.; Krishna, P.; Parappagoudar, M.B.In the present work, an attempt has been made using statistical tools to develop a non-linear regression model and to identify the significant contribution of squeeze cast process parameters on surface roughness, hardness and tensile strength. Microstructure examination performed on the squeeze cast samples has revealed that a maximum of 100 MPa pressure is good enough to eliminate all possible casting defects. Accuracy of the developed models has been tested with the help of ten test cases. It is important to note that the developed models predict responses with a reasonably good accuracy and the developed mathematical input–output relationship helps the foundry-man to make better predictions. The present work comprises four objectives, which are conflicting in nature. Hence, mathematical formulation is used to convert four objective functions into a single objective function. The popular evolutionary algorithm, that is genetic algorithm has been utilised to determine the optimal process parameters. © 2015 Engineers Australia.Item Multi-Objective Optimization of Squeeze Casting Process using Genetic Algorithm and Particle Swarm Optimization(De Gruyter Open Ltd peter.golla@degruyter.com, 2016) Gowdru Chandrashekarappa, G.C.; Krishna, P.; Vundavilli, P.R.; Parappagoudar, M.B.The near net shaped manufacturing ability of squeeze casting process requiresto set the process variable combinations at their optimal levels to obtain both aesthetic appearance and internal soundness of the cast parts. The aesthetic and internal soundness of cast parts deal with surface roughness and tensile strength those can readily put the part in service without the requirement of costly secondary manufacturing processes (like polishing, shot blasting, plating, hear treatment etc.). It is difficult to determine the levels of the process variable (that is, pressure duration, squeeze pressure, pouring temperature and die temperature) combinations for extreme values of the responses (that is, surface roughness, yield strength and ultimate tensile strength) due to conflicting requirements. In the present manuscript, three population based search and optimization methods, namely genetic algorithm (GA), particle swarm optimization (PSO) and multi-objective particle swarm optimization based on crowding distance (MOPSO-CD) methods have been used to optimize multiple outputs simultaneously. Further, validation test has been conducted for the optimal casting conditions suggested by GA, PSO and MOPSO-CD. The results showed that PSO outperformed GA with regard to computation time. © 2016 G.C.M. Patel et al., published by De Gruyter Open.Item An intelligent system for squeeze casting process—soft computing based approach(Springer London, 2016) Gowdru Chandrashekarappa, G.C.; Krishna, P.; Parappagoudar, M.B.The present work deals with the forward and reverse modelling of squeeze casting process by utilizing the neural network-based approaches. The important quality characteristics in squeeze casting, namely surface roughness and tensile strength, are significantly influenced by its process variables like pressure duration, squeeze pressure, and pouring and die temperatures. The process variables are considered as input and output to neural network in forward and reverse mapping, respectively. Forward and reverse mappings are carried out utilizing back propagation neural network and genetic algorithm neural network. For both supervised learning networks, batch training is employed using huge training data (input-output data). The input-output data required for training is generated artificially at random by varying process variables between their respective levels. Further, the developed model prediction performances are compared for 15 random test cases. Results have shown that both models are capable to make better predictions, and the models can be used by any novice user without knowing much about the mechanics of materials and the process. However, the genetic algorithm tuned neural network (GA-NN) model prediction performance is found marginally better in forward mapping, whereas BPNN produced better results in reverse mapping. © 2016, Springer-Verlag London.Item Back propagation genetic and recurrent neural network applications in modelling and analysis of squeeze casting process(Elsevier Ltd, 2017) Gowdru Chandrashekarappa, M.; Shettigar, A.K.; Krishna, P.; Parappagoudar, M.B.Today, in competitive manufacturing environment reducing casting defects with improved mechanical properties is of industrial relevance. This led the present work to deal with developing the input-output relationship in squeeze casting process utilizing the neural network based forward and reverse mapping. Forward mapping is aimed to predict the casting quality (such as density, hardness and secondary dendrite arm spacing) for the known combination of casting variables (that is, squeeze pressure, pressure duration, die and pouring temperature). Conversely, attempt is also made to determine the appropriate set of casting variables for the required casting quality (that is, reverse mapping). Forward and reverse mapping tasks are carried out utilizing back propagation, recurrent and genetic algorithm tuned neural networks. Parameter study has been conducted to adjust and optimize the neural network parameters utilizing the batch mode of training. Since, batch mode of training requires huge data, the training data is generated artificially using response equations. Furthermore, neural network prediction performances are compared among themselves (reverse mapping) and with those of statistical regression models (forward mapping) with the help of test cases. The results shown all developed neural network models in both forward and reverse mappings are capable of making effective predictions. The results obtained will help the foundry personnel to automate and précised control of squeeze casting process. © 2017Item Artificial bee colony, genetic, back propagation and recurrent neural networks for developing intelligent system of turning process(Springer Nature, 2020) Shettigar, A.K.; Gowdru Chandrashekarappa, G.C.M.; Ganesh, G.R.; Vundavilli, P.R.; Parappagoudar, M.B.Intelligent manufacturing requires significant technological interventions to interface manufacturing processes with computational tools in order to dynamically mold the systems. In this era of the 4th industrial revolution, Artificial neural network (ANNs) is a modern tool equipped with a better learning capability (based on the past experience or history data) and assists in intelligent manufacturing. This research paper reports on ANNs based intelligent modelling of a turning process. The central composite design is used as a data-driven modelling tool and huge input–output is generated to train the neural networks. ANNs are trained with the data collected from the physics-based models by using back-propagation algorithm (BP), genetic algorithm (GA), artificial bee colony (ABC), and BP algorithm trained with self-feedback loop. The ANNs are trained and developed as both forward and reverse mapping models. Forward modelling aims at predicting a set of machining quality characteristics (i.e. surface roughness, cylindricity error, circularity error, and material removal rate) for the known combinations of cutting parameters (i.e. cutting speed, feed rate, depth of cut, and nose radius). Reverse modelling aims at predicting the cutting parameters for the desired machining quality characteristics. The parametric study has been conducted for all the developed neural networks (BPNN, GA-NN, RNN, ABC-NN) to optimize neural network parameters. The performance of neural network models has been tested with the help of ten test cases. The network predicted results are found in-line with the experimental values for both forward and reverse models. The neural network models namely, RNN and ABC-NN have shown better performance in forward and reverse modelling. The forward modelling results could help any novice user for off-line monitoring, that could predict the output without conducting the actual experiments. Reverse modelling prediction would help to dynamically adjust the cutting parameters in CNC machine to obtain the desired machining quality characteristics. © 2020, Springer Nature Switzerland AG.