Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
9 results
Search Results
Item Large and Uniform Single Crystals of MoS2Monolayers for ppb-Level NO2Sensing(American Chemical Society, 2022) Patel, C.; Singh, R.; Dubey, M.; Pandey, S.K.; Upadhyay, S.N.; Kumar, V.; Sriram, S.; Than Htay, M.; Pakhira, S.; Atuchin, V.V.; Mukherjee, S.Recently, unprecedented interest has been immersed toward the synthesis of two-dimensional (2D) transition metal dichalcogenides via the chemical vapor deposition (CVD) system. Synthesis of a uniform and large-sized monolayer MoS2atomic thin film via CVD is still a major bottleneck owing to strong dependence on diverse associated growth parameters. In this work, we have proposed the most viable recipe which is suitable for controlling the nucleation density of Mo and producing a 90 μm-long MoS2monolayer crystal and (695 × 394.8) μm2large MoS2monolayered film on SiO2/Si and c-plane sapphire, respectively. Moreover, MoS2monolayer sensing performance has been thoroughly investigated for NO2exposure at room temperature with a varying response of 4-57.5 for the 100-100 ppm level. Furthermore, the MoS2monolayer sensor exhibits an ultrasensitive NO2detection with limit of detection and limit of qualification values of 1.4 and 4.6 ppb, respectively. In addition, the first-principles-based density functional theory has been employed to analyze the adsorption of NO2on the surfaces of the 2D MoS2monolayer. It is observed that the electronic band gap of the MoS2monolayer after NO2adsorption is reduced by 0.7 eV due to molecular orbital hybridization. © 2022 American Chemical Society. All rights reserved.Item Growth optimization and DFT investigation of doping effect on properties of VS2 monolayer crystals(Springer Science and Business Media Deutschland GmbH, 2023) Yadav, A.K.; Patel, C.; Kiran, G.; Singh, R.; Singh, A.K.; Garg, V.; Mukherjee, S.; Pandey, S.K.The vanadium disulfide (VS2) material, a prominent member of the two-dimensional materials family, has great potential to bridge the performance gap between current performance and contemporary energy storage device needs. Here, we report the optimization of the growth temperature of VS2 monolayer crystals using a chemical vapor deposition system. It is also found the crystal size increases with the increase of growth temperature up to 770 °C. Further increasing of growth temperature resulted in a reduction of crystal size. The atomic force microscopy measurement demonstrated the growth of monolayer thick VS2 crystal. Raman spectra revealed the formation of H-phase monolayer high-quality VS2 crystals. To understand the precise impact of doping on electronic properties, the substitutional doping of VS2 monolayer with chromium, molybdenum, and tungsten was also examined using density functional theory. The VS2 monolayer exhibits an indirect energy band gap that decreases after chromium doping of the VS2 lattice and vanishes after molybdenum and tungsten doping. Finally, it is found that tungsten-doped VS2 monolayer exhibits strong metallic character and other exceptional properties, making it suitable for electrodes of various energy storage devices. Graphical abstract: [Figure not available: see fulltext.]. © 2023, The Author(s), under exclusive licence to EDP Sciences, SIF and Springer-Verlag GmbH Germany, part of Springer Nature.Item Effect of Introducing Defects and Doping on Different Properties of Monolayer MoS2(John Wiley and Sons Inc, 2023) Prajakta, K.; Vinturaj, V.P.; Singh, R.; Garg, V.; Pandey, S.K.; Pandey, S.K.Herein, the comprehensive study of different properties of undoped MoS2, MoS2 lattice with sulfur (S) and, molybdenum (Mo) vacancy, and MoS2 with substitutional doping of niobium (Nb), vanadium (V), and zinc (Zn) atoms is done. The density functional theory (DFT) is used and the electronic properties like density of states, band structure, electron density, and optical properties like dielectric function, optical conductivity, and refractive index are studied. It is observed that undoped MoS2 monolayer shows direct bandgap semiconductor characteristics with a bandgap of around 1.79 eV. P-type characteristics are observed for Nb-, V-, and Zn-doped MoS2 lattices. The real part and imaginary parts of all optical parameters along x and z directions for different MoS2 supercells are found to be anisotropic in nature up to a photon energy of almost 11 eV and thereafter they show nearly isotropic nature. Finally, it is found that the obtained properties of MoS2 monolayer as per literature are suitable for next-generation MOSFET application. © 2023 Wiley-VCH GmbH.Item Theoretical investigation of electronic and optical properties of doped and defective MoSe2 monolayers(Springer, 2023) Vinturaj, V.P.; Yadav, A.K.; Jasil, T.K.; Kiran, G.; Singh, R.; Singh, A.K.; Garg, V.; Pandey, S.K.In this work, we have investigated the various electronic and optical properties of undoped molybdenum diselenide (MoSe2) monolayer, such as band structure, density of states, electron density, dielectric function, refractive index, extinction coefficient, reflectivity and energy loss function using density functional theory. Additionally, substitutional doping using niobium (Nb) and manganese (Mn) atoms and introducing defects in undoped MoSe2 lattice were investigated to know the detailed effect of the same on its properties. It is found that the undoped MoSe2 monolayer demonstrates a direct energy bandgap of ~1.44 eV, which reduces after Mn, Nb doping and after introducing Mo, Se vacancy. The energy bandgap attains a very small value 0.2 eV after introducing Se vacancy defect in MoSe2 lattice. The extinction coefficient of MoSe2 monolayer demonstrates a significant increase from 1.79 to 2.66 a.u. after introducing the Mo vacancy in the undoped lattice. The variation of semiconductor to nearly semi-metallic character of MoSe2 by introducing defects makes it very suitable for the application in high-performance solar cells, photo-electrochemical cells, sensors and biosensor applications. © 2023, Indian Academy of Sciences.Item DFT Study about the Effect of Doping on the Properties of GaSb Material and Designing of High-Efficiency Infrared Photodetector(John Wiley and Sons Inc, 2023) Bhandari, B.; Yadav, A.K.; Singh, R.; Kiran, G.; Singh, A.K.; Garg, V.; Pandey, S.K.The gallium antimonide (GaSb) material has very attractive electronic and optoelectronic properties which are suitable for next-generation infrared (IR) photodetector applications. In this work, properties of undoped GaSb material such as density of states, bandstructure, electron density, absorption coefficient, dielectric function, refractive index, and extinction coefficient are calculated using density-functional theory (DFT). Moreover, the effects of doping with Ge, Sn, and Zn elements on these properties of GaSb material are investigated. It is found that undoped GaSb material exhibits a direct gap of ≈0.72 eV. Among different doping elements, Ge-doped GaSb produces a very significant enhancement in optical properties. The Ge-doped GaSb demonstrates a four times higher absorption coefficient in comparison to undoped GaSb in the IR region at 0.8 eV photon energy. GaSb-based photodetector device is designed using the Solar Cell Capacitance Simulator (SCAPS) 1D tool. The efficiency of the designed photodetector with optimum thicknesses and doping of different layers is found to be improved from 21.34% to 25.91% after incorporating the absorption data set obtained from the DFT calculations. Additionally, the photodetector with optimum parameters demonstrates maximum responsivity of value ≈0.31 A W−1. In the previous findings, it is demonstrated that GaSb is a very suitable material for next-generation IR photodetector applications. © 2023 Wiley-VCH GmbH.Item DFT Calculations for Temperature Stable Quantum Capacitance of VS2 Based Electrodes for Supercapacitors(Institute of Electrical and Electronics Engineers Inc., 2024) Yadav, A.K.; Shreevathsa, N.S.; Singh, R.; Das, P.P.; Garg, V.; Pandey, S.K.Using density functional theory calculations, we demonstrate the quantum capacitance of the VS2 electrode which can be improved by doping with non-metallic elements such as nitrogen (N), phosphorus (P), and arsenic (As) atoms. The radius, charge, and morphology of these non-metallic elements help to improve the performance of VS2 material as electrodes of supercapacitors. The As-doped VS2 monolayer demonstrated the maximum quantum capacitance of 31.2369 μF/cm2 at 300 K. At 1200 K, quantum capacitance reaches the value of 25.2149 μF/cm2, showing the inconsiderable change in value for this wide range of temperature variation. Additionally, the other important properties of undoped and doped VS2 monolayers such as density of states, energy band structure, electrical conductivity, thermal conductivity, and the Seebeck coefficient were also computed and examined in detail. The band structure of the P and As-doped VS2 monolayers showed a metallic nature, which is suitable for electrode application. In the case of As-doped VS2 material, a high figure of merit of 3.536 was observed by using DFT-D2 calculations, due to the large Seebeck coefficient and significant electrical conductivity. Our findings will be helpful in further exploring the suitability of VS2 monolayers as electrodes of supercapacitors. © 2002-2012 IEEE.Item Comprehensive Modeling of High-Performance All-Inorganic Cs2TiBr6-Based Perovskite Solar Cells(John Wiley and Sons Inc, 2024) Kumar, S.; Thiyyakkandy, J.; Yadav, A.K.; Vinturaj, V.; Garg, V.; Prabhu, S.; Pandey, S.K.The perovskites are desirable materials for photovoltaic and other renewable green energy technologies. Lead-based perovskite solar cells (PSC) have recently gained considerable attention due to the abrupt rise in power conversion efficiency, but lead's well-known toxicity prevents its large-scale commercialization. One compelling option is Cs2TiBr6, which offers a nontoxic alternative. Herein, the electronic and optical characteristics of Cs2TiBr6 absorber material using density functional theory employing the WIEN2K tool are investigated. The energy band structure of Cs2TiBr6 shows an indirect bandgap of 2.2 eV. Additionally, optical properties are calculated, and the suitability of this material as an absorber for indoor and outdoor photovoltaic devices is investigated. The Cs2TiBr6 material has a peak absorption coefficient of 39.57 × 104 cm−1 and optical conductivity of 1.98 × 1015s−1, demonstrating its suitability as an absorber material. After that, a PSC is modeled using SCAPS-1D by using the computed parameters. The performance of the modeled perovskite is enhanced by optimization of various parameters, resulting in the achievement of a high-performance Cs2TiBr6-based PSC, boasting a power conversion efficiency of 19.9% for air mass AM1.5 G spectra and power conversion efficiency of 16.76% for light emitting diode and 17.18% for incandescent light for indoor light conditions. © 2024 Wiley-VCH GmbH.Item Enhancement of Functionalized 1T-NbS2 Monolayer Properties for the Superior Anode of Na-Ion Batteries(Institute of Electrical and Electronics Engineers Inc., 2025) Jasil, T.K.; Yadav, A.K.; Maurya, G.K.; Garg, V.; Pandey, S.K.One of the most important factors influencing the performance of Na-ion batteries (NIBs) is the anode’s quality. Currently, NIB anodes have numerous disadvantages, including low capacity, rapid volume change, temperature variable conductivity and poor thermal/chemical stability. In this work, the electronic and transport properties of undoped, doped and defective 1T-NbS2 monolayers were investigated using density functional theory calculations. The maximum quantum capacitance of 1T-NbS2 with S-vacancy (VS-NbS2) changes from 20.49 to 16.92 ?F/cm2 across temperature ranges of 200 K to 1000 K, indicating its suitability as anode with temperature-stable capacity. The 1T-NbS2 monolayers exhibit high electrical conductivity with less than 6% fluctuation across a temperature range of 200 K to 1000 K, indicating thermally stable conductance. The 1T-NbS2 layered structure has substantially larger interlayer spacing of 0.615 nm than the size of Na ion (0.095 nm), as well as a relatively tiny variation (0.05 eV for VS-NbS2) in cohesive energies between sodiated and de-sodiated phases, making it a good choice for anodes. For VS-NbS2, the seebeck coefficient ranges from -5 to -40 ?V/K, which is often obtained by the most commonly used Na-metal anode, demonstrating its appropriateness as anode. According to our findings, 1T-NbS2 is a great option for thermally stable NIB electrode applications. © 2002-2012 IEEE.Item Optimization of the Properties of Functionalized BC3 Monolayer for Superior Electrode of Solid-State Sodium-Ion Batteries(John Wiley and Sons Inc, 2025) Vudumula, K.; Yadav, A.K.; Maurya, G.K.; Singh, R.; Nikhil, K.S.; Pandey, S.K.Solid-state batteries offer superior safety, high energy density, and the ability to function effectively across a wide range of temperatures. Sodium-ion (Na-ion) solid-state batteries are a promising alternative to lithium-ion batteries due to sodium's abundance and low cost. A high-quality electrode is crucial for achieving high performance in Na-ion batteries. In this study, structural stability, electronic properties, and performance of functionalized hexagonal boron carbide (BC3) are investigated for ultrathin electrodes using density functional theory (DFT). The effective adsorption of Li, Na, K, and Mg atoms at the BC3 surface is also investigated. The BC3 monolayer has a ?0.8 eV indirect bandgap, which becomes metallic after Na adsorption, making it suitable for electrode applications. Additionally, the Na-adsorbed BC3 monolayer shows the lowest adsorption energy (?1.2 eV), which is the most stable lattice structure among others. The Na-adsorbed BC3 demonstrated a theoretical capacity of 1152 mAh g?1, which is comparable with the Li-adsorbed electrode. Moreover, the Na-adsorbed BC3 electrode shows a very small variation (0.18 V) for open circuit voltage (OCV), indicating this electrode is robust in terms of voltage stability. These findings show that the functionalized BC3 ultrathin electrode is very suitable for the electrode of Na-ion solid-state batteries. © 2025 Wiley-VCH GmbH.