Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item A selective complexometric method is described for the determination of mercury(II) using sodium metabisulphite as a masking reagent. An excess of EDTA is added to mercury(II) solution containing associated diverse metal ions and the surplus EDTA is back titrated at pH 5-6 (hexamine buffer) with standard zinc sulphate solution using xylenol orange as indicator. An aqueous solution of sodium metabisulphite is then added to displace EDTA selectively from Hg-EDTA complex and the released EDTA is then titrated against the same standard zinc sulphate solution. Reproducible and accurate results are obtained in the range 4-100 mg of mercury with a relative error ? 0.26% and coefficient of variation ?0.40%. The method is useful for the analysis of mercury in complexes and alloy samples.(Complexometric method for the determination of mercury using sodium metabisulphite as selective masking reagent) Shetty, P.; Nityananda Shetty, A.N.2004Item Spectrophotometric determination of platinum(IV) in alloys, complexes, environmental, and pharmaceutical samples using 4-[N,N-(diethyl)amino] benzaldehyde thiosemicarbazone(2010) Naik, P.P.; Karthikeyan, J.; Nityananda Shetty, A.N.4-[N,N-(Diethyl)amino] benzaldehyde thiosemicarbazone (DEABT) is proposed as an analytical reagent for the spectrophotometric determination of platinum(IV). The DEABT forms 1:2 yellow complex with Pt(IV), which is sparingly soluble in water and completely soluble in water-ethanol-DMF medium. The Pt(IV)-DEABT complex shows maximum absorbance at 405 nm. Beer's law is valid up to 7.80 ?g cm-3, and optimum concentration range for the determination of platinum(IV) is 0.48-7.02 ?g cm-3. The molar absorptivity and Sandell's sensitivity of the method are found to be 1.755 × 104 dm3 mol-1 cm-1 and 0.0012 ?g cm-2, respectively. The relative error and coefficient of variation (n=6) for the method does not exceed ±0.43% and 0.35%, respectively. Since the method tolerates a number of metal ions commonly associated with platinum, it can be employed for the determination of platinum in environmental samples, pharmaceutical samples, alloys, catalysts, and complexes. The method is rapid as the Pt(IV)-DEABT complex is soluble in water-ethanol-DMF medium and not requiring any time consuming extraction method for the complex. © 2010 Springer Science+Business Media B.V.Item The high energy supercapacitor from rGO/Ni(OH)2/PANI nanocomposite with methane sulfonic acid as dopant(Academic Press Inc. apjcs@harcourt.com, 2019) Viswanathan, A.; Nityananda Shetty, A.N.The low energy densities of supercapacitors limit their utilization as energy storage and energy conversion devices. To overcome this limitation, here we present a ternary nanocomposite of reduced graphene oxide (rGO)/nickel hydroxide (Ni(OH)2/polyaniline (PANI), with methane sulfonic acid as dopant, having weight percentages of 14%:14%:72% (G14NP), respectively, as an electrode material for supercapacitor. With 1 M sulfuric acid (H2SO4) as the electrolyte, the supercapacitor yields a high energy density of 120.48 W h kg?1, comparable with those of Li-ion batteries. The G14NP also exhibits good electrochemical performance with a specific capacitance of 602.40 F g?1 and a power density of 2584.83 W kg?1, at a current density of 1 A g?1. The G14NP also exhibits a promising stability of its electrochemical performances even after 16,500 cycles at a potential scan of 400 mV s?1. Remarkably, the composite performs exceptionally well at a potential window available in an aqueous electrolyte. The sustainability to high current loading while charging and its power backup application is satisfactorily demonstrated, by charging with a commercial 9 V battery. © 2019 Elsevier Inc.