Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item A selective complexometric method is described for the determination of mercury(II) using sodium metabisulphite as a masking reagent. An excess of EDTA is added to mercury(II) solution containing associated diverse metal ions and the surplus EDTA is back titrated at pH 5-6 (hexamine buffer) with standard zinc sulphate solution using xylenol orange as indicator. An aqueous solution of sodium metabisulphite is then added to displace EDTA selectively from Hg-EDTA complex and the released EDTA is then titrated against the same standard zinc sulphate solution. Reproducible and accurate results are obtained in the range 4-100 mg of mercury with a relative error ? 0.26% and coefficient of variation ?0.40%. The method is useful for the analysis of mercury in complexes and alloy samples.(Complexometric method for the determination of mercury using sodium metabisulphite as selective masking reagent) Shetty, P.; Nityananda Shetty, A.N.2004Item A simple, rapid and accurate complexometric method for the determination of palladium(II) is proposed, based on the selective masking property of thioacetamide towards palladium(II). In the presence of diverse metal ions, palladium(II) is complexed with excess of EDTA and the surplus EDTA is back titrated at pH 5-5.5(acetic acid-sodium acetate buffer) with standard lead nitrate solution using xylenol orange as indicator. An excess of a 0.5% aqueous solution of thioacetamide is then added to displace EDTA from Pd(II)-EDTA complex. The released EDTA is titrated with the same standard lead nitrate solution as before. Reproducible and accurate results are obtained in the concentration range 0.5mg-17.80mg of palladium with relative error of ±0.16% and coefficient of variation not exceeding 0.26%. The effect of diverse ions is studied. The method is used for the determination of palladium in its complexes, catalysts and synthetic alloy mixtures.(Complexometric determination of palladium(II) using thioacetamide as a selective masking agent) Parameshwara, P.; Karthikeyan, J.; Nityananda Shetty, A.N.; Shetty, P.2006Item Spectrophotometric determination of platinum(IV) in alloys, complexes, environmental, and pharmaceutical samples using 4-[N,N-(diethyl)amino] benzaldehyde thiosemicarbazone(2010) Naik, P.P.; Karthikeyan, J.; Nityananda Shetty, A.N.4-[N,N-(Diethyl)amino] benzaldehyde thiosemicarbazone (DEABT) is proposed as an analytical reagent for the spectrophotometric determination of platinum(IV). The DEABT forms 1:2 yellow complex with Pt(IV), which is sparingly soluble in water and completely soluble in water-ethanol-DMF medium. The Pt(IV)-DEABT complex shows maximum absorbance at 405 nm. Beer's law is valid up to 7.80 ?g cm-3, and optimum concentration range for the determination of platinum(IV) is 0.48-7.02 ?g cm-3. The molar absorptivity and Sandell's sensitivity of the method are found to be 1.755 × 104 dm3 mol-1 cm-1 and 0.0012 ?g cm-2, respectively. The relative error and coefficient of variation (n=6) for the method does not exceed ±0.43% and 0.35%, respectively. Since the method tolerates a number of metal ions commonly associated with platinum, it can be employed for the determination of platinum in environmental samples, pharmaceutical samples, alloys, catalysts, and complexes. The method is rapid as the Pt(IV)-DEABT complex is soluble in water-ethanol-DMF medium and not requiring any time consuming extraction method for the complex. © 2010 Springer Science+Business Media B.V.Item A rapid extractive spectrophotometric determination of copper(II) in environmental samples, alloys, complexes and pharmaceutical samples using 4-N,N(dimethyl)amino]benzaldehyde thiosemicarbazone(2011) Karthikeyan, J.; Naik, P.P.; Nityananda Shetty, A.N.4-[N,N-(Dimethyl)amino]benzaldehyde thiosemicarbazone (DMABT) is proposed as an analytical reagent for the extractive spectrophotometric determination of copper(II). DMABT forms yellow colored complex with copper(II) in the pH range 4.4-5.4. Beer's law is obeyed in the concentration range up to 4.7 ?g mL -1. The optimum concentration range for minimum photometric error as determined by Ringbom plot method is 1.2-3.8 ?g mL-1. The yellowish Cu(II)-DMABT complex shows a maximum absorbance at 420 nm, with molar absorptivity of 1.72 × 104dm3 mol-1 cm-1 and Sandell's sensitivity of the complex obtained from Beer's data is 0.0036 ?g cm-2. The composition of the Cu(II)-DMABT complex is found to be 1:2 (M/L). The interference of various cations and anions in the method were studied. Thus the method can be employed for the determination of trace amount of copper(II) in water, alloys and other natural samples of significant importance. © 2010 Springer Science+Business Media B.V.